Marine CSEM of the Scarborough gas field, Part 1: Experimental design and data uncertainty

We describe the planning, processing, and uncertainty analysis for a marine CSEM survey of the Scarborough gas field off the northwest coast of Australia, consisting of 20 transmitter tow lines and 144 deployments positioned along a dense 2D profile and a complex 3D grid. The purpose of this survey was to collect a high-quality data set over a known hydrocarbon prospect and use it to further the development of CSEM as a hydrocarbon mapping tool. Recent improvements in navigation and processing techniques yielded high-quality frequency domain data. Data pseudosections exhibit a significant anomaly that is laterally confined within the known reservoir location. Perturbation analysis of the uncertainties in the transmitter parameters yielded predicted uncertainties in amplitude and phase of just a few percent at close ranges. These uncertainties may, however, be underestimated. We introduce a method for more accurately deriving uncertainties using a line of receivers towed twice in opposite directions. Comparing the residuals for each line yields a Gaussian distribution directly related to the aggregate uncertainty of the transmitter parameters. Constraints on systematic error in the transmitter antenna dip and inline range can be calculated by perturbation analysis. Uncertainties are not equal in amplitude and phase, suggesting that inversion of these data would be better suited in these components rather than in real and imaginary components. One-dimensional inversion showed that the reservoir and a confounding resistive layer above it cannot be separately resolved even when the roughness constraint is modified to allow for jumps in resistivity and prejudices are provided, indicating that this level of detail is beyond the single-site CSEM data. Further, when range-dependent error bars are used, the resolution decreases at a shallower depth than when a fixed-error level is used.

[1]  Nigel Edwards,et al.  Marine Controlled Source Electromagnetics: Principles, Methodologies, Future Commercial Applications , 2005 .

[2]  Svein Ellingsrud,et al.  The Meter Reader—Remote sensing of hydrocarbon layers by seabed logging (SBL): Results from a cruise offshore Angola , 2002 .

[3]  S. Constable,et al.  Marine magnetotellurics for petroleum exploration Part I: A sea-floor equipment system , 1998 .

[4]  B. Haq,et al.  Seismic Stratigraphy and Passive‐Margin Evolution of the Southern Exmouth Plateau , 2009 .

[5]  Chester J. Weiss,et al.  Mapping thin resistors and hydrocarbons with marine EM methods: Insights from 1D modeling , 2006 .

[6]  Steven Constable,et al.  Electrical resistivity structure of the Valu Fa Ridge, Lau Basin, from marine controlled‐source electromagnetic sounding , 2001 .

[7]  Michael S. Zhdanov,et al.  Electromagnetic geophysics: Notes from the past and the road ahead , 2010 .

[8]  S. Constable,et al.  A Seafloor Electric Field Instrument , 1985 .

[9]  S. Constable.  Ten years of marine CSEM for hydrocarbon exploration , 2010 .

[10]  G. A. Newman,et al.  Imaging CSEM data in the presence of electrical anisotropy - eScholarship , 2010 .

[11]  Chester J. Weiss,et al.  Mapping thin resistors and hydrocarbons with marine EM methods, Part II -Modeling and analysis in 3D , 2006 .

[12]  K. Key,et al.  Determining the orientation of marine CSEM receivers using orthogonal Procrustes rotation analysis , 2010 .

[13]  B. Haq,et al.  Evolution of the Central Exmouth Plateau: A Post-Drilling Perspective , 1992 .

[14]  S. Constable,et al.  Magnetotelluric evidence for layered mafic intrusions beneath the Vøring and Exmouth rifted margins , 2013 .

[15]  G. Ivey,et al.  The generation of internal waves by tidal flow over continental shelf/slope topography , 2008 .

[16]  S. Constable.  Review paper: Instrumentation for marine magnetotelluric and controlled source electromagnetic sounding , 2013 .

[17]  U. Rad,et al.  The geological development of the passive margins of the Exmouth Plateau off northwest Australia , 1982 .

[18]  Jeffrey S. Ovall,et al.  A parallel goal-oriented adaptive finite element method for 2.5-D electromagnetic modelling , 2011 .

[19]  M. Unsworth,et al.  An active source electromagnetic sounding system for marine use , 1990 .

[20]  David S. Stoffer,et al.  Time series analysis and its applications , 2000 .

[21]  C. S. Cox,et al.  Marine controlled-source electromagnetic sounding. 2. The PEGASUS experiment , 1996 .

[22]  Kerry Key,et al.  The feasibility of reservoir monitoring using time-lapse marine CSEM , 2009 .

[23]  J. Antenucci,et al.  The variability of the large-amplitude internal wave field on the Australian North West Shelf , 2009 .

[24]  Steven Constable,et al.  Microseism propagation between two sites on the deep seafloor , 1986 .

[25]  Kerry Key,et al.  Broad-band waveforms and robust processing for marine CSEM surveys , 2011 .

[26]  Claude C. Leroy,et al.  Depth-pressure relationships in the oceans and seas , 1998 .

[27]  Kerry Key,et al.  1D inversion of multicomponent, multifrequency marine CSEM data: Methodology and synthetic studies for resolving thin resistive layers , 2009 .

[28]  J. Mutter,et al.  Development of the continent-ocean transform boundary of the southern Exmouth Plateau , 1991 .

[29]  C. S. Cox,et al.  Controlled-source electromagnetic sounding of the oceanic lithosphere , 1986, Nature.

[30]  C. S. Cox,et al.  Observations and modeling of seafloor microseisms , 1986 .

[31]  N. Driscoll,et al.  Lower crustal extension across the Northern Carnarvon basin, Australia: Evidence for an eastward dipping detachment , 1998 .

[32]  J. Mutter,et al.  Extension of the Exmouth Plateau, offshore northwestern Australia: Deep seismic reflection/refraction evidence for simple and pure shear mechanisms , 1989 .

[33]  Kerry Key,et al.  Marine Electromagnetic Studies of Seafloor Resources and Tectonics , 2011, Surveys in Geophysics.

[34]  S. Webb,et al.  Pressure and electric fluctuations on the deep seafloor: Background noise for seismic detection , 1984 .