Effect of axial ratcheting deformation on torsional low cycle fatigue life of lead-free solder Sn–3.5Ag

Abstract Multiaxial fatigue tests were conducted on Sn–3.5Ag solder specimens under axial/torsional loading at room temperature. It was found that the ratcheting strain increased while the fatigue life decreased with the increase of axial stress and shear strain amplitude. A power relationship of ratcheting strain rate versus fatigue life was observed. Equivalent strain approach and critical plane approaches were evaluated with fatigue life data obtained in the tests. Since those approaches excluded the consideration of the ratcheting strain and mean stress, the methods for fatigue life prediction were improper for multiaxial fatigue with ratcheting strain. Coffin model, considered the effect of ratcheting on fatigue life depending on the ratio of ratcheting strain to material ductility, brought the fatigue life predictions on non-conservative side if the ratcheting deformation was large. For this reason, a model with the maximum shear strain range and axial ratcheting strain rate was proposed as a new damage parameter. The new model could not only describe the fatigue life in torsion test, but also predicted torsional fatigue life of the lead-free solder with axial ratcheting.

[1]  A. Fatemi,et al.  A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT‐OF‐PHASE LOADING , 1988 .

[2]  G. Kang,et al.  Experimental study on ratchetting-fatigue interaction of SS304 stainless steel in uniaxial cyclic stressing , 2006 .

[3]  Jürgen Rudolph,et al.  Simulation of ratcheting and low cycle fatigue , 2004 .

[4]  S. Harvey,et al.  Fatigue and ratcheting interactions , 1995 .

[5]  Xianjie Yang LOW CYCLE FATIGUE AND CYCLIC STRESS RATCHETING FAILURE BEHAVIOR OF CARBON STEEL 45 UNDER UNIAXIAL CYCLIC LOADING , 2005 .

[6]  K. J. Lau,et al.  Time-dependent cyclic deformation and failure of 63Sn/37Pb solder alloy , 2003 .

[7]  Xu Chen,et al.  Experimental study on ratcheting behavior of eutectic tin–lead solder under multiaxial loading , 2005 .

[8]  K. Dang Van,et al.  Evaluation of fatigue-ratcheting damage of a pressurised elbow undergoing damage seismic inputs , 2000 .

[9]  A unified time dependent model for low cycle fatigue and ratchetting failure based on microcrack growth , 2007 .

[10]  D. C. Chandler,et al.  High Strain Torsion Fatigue of Solid and Tubular Specimens , 1969 .

[11]  David L. McDowell,et al.  A Finite Element Procedure of a Cyclic Thermoviscoplasticity Model for Solder and Copper Interconnects , 1998 .

[12]  Shashwat Sinha,et al.  Modeling cyclic ratcheting based fatigue life of HSLA steels using crystal plasticity FEM simulations and experiments , 2006 .

[13]  J. Lau,et al.  Creep Analysis of Wafer Level Chip Scale Package (WLCSP) With 96.5Sn-3.5Ag and 100In Lead-Free Solder Joints and Microvia Build-Up Printed Circuit Board , 2000, Packaging of Electronic and Photonic Devices.

[14]  K. J. Miller,et al.  A Theory for Fatigue Failure under Multiaxial Stress-Strain Conditions , 1973 .

[15]  S. Sivakumar,et al.  A new failure criterion for materials exhibiting ratcheting during very low cycle fatigue , 2007 .

[16]  Daniel Kujawski,et al.  Effect of mean stress and ratcheting strain on fatigue life of steel , 1996 .

[17]  Xu Chen,et al.  A critical plane-strain energy density criterion for multiaxial low-cycle fatigue life under non-proportional loading , 1999 .

[18]  Dj. Boussaa,et al.  Fatigue-Seismic Ratcheting Interactions in Pressurized Elbows , 1994 .

[19]  K. Ohguchi,et al.  Experimental Observation of Correlation Between Creep and Uniaxial Ratchetting of Sn∕37Pb and Sn∕3Ag∕0.5Cu Solder Alloys , 2007 .

[20]  Tomomi Otani,et al.  Effect of ratcheting deformation on fatigue and creep-fatigue life of 316FR stainless steel , 2008 .

[21]  A. Varvani-Farahani,et al.  A new energy-critical plane parameter for fatigue life assessment of various metallic materials subjected to in-phase and out-of-phase multiaxial fatigue loading conditions , 2000 .

[22]  G. Kang,et al.  Stress-based fatigue failure models for uniaxial ratchetting–fatigue interaction , 2008 .

[23]  G. Kang,et al.  Uniaxial ratchetting and low-cycle fatigue failure of the steel with cyclic stabilizing or softening feature , 2008 .

[24]  N. Kasahara,et al.  CLARIFICATION OF STRAIN LIMITS CONSIDERING THE RATCHETING FATIGUE STRENGTH OF 316FR STEEL , 2008 .

[25]  Sheng Liu,et al.  Investigation of a New Lead Free Solder Alloy Using Thin Strip Specimens , 1999 .

[26]  Xu Chen,et al.  Low cycle fatigue life prediction of 63Sn-37Pb solder under proportional and non-proportional loading , 2006 .

[27]  G. Tao,et al.  Ratcheting behavior of an epoxy polymer and its effect on fatigue life , 2007 .

[28]  Leon M Keer,et al.  Damage evolution governed by microcrack nucleation with application to the fatigue of 63Sn–37Pb solder , 1999 .