Mechanical properties of compositionally modulated Au-Ni thin films: Nanoindentation and microcantilever deflection experiments

The mechanical properties of compositionally-modulated Au--Ni films were investigated by sub-micrometer depth-sensing indentation and by deflection of micrometer-scale cantilever beams. Films prepared by sputter deposition with composition wavelengths between 0.9 and 4.0 nm were investigated. Strength was found to be high and invariant with composition wavelength. Experimental and data analysis methods were developed to provide more accurate and precise measurements of elastic stiffness. Large enhancements in stiffness (the supermodulus effect'') were [ital not] observed. Rather, relatively small but significant minima were observed at a composition wavelength of about 1.6 nm by both techniques. These variations were found to be strongly correlated with variations in the average lattice parameter normal to the plane of the film. Both structural and mechanical property variations are consistent with a simple model in which the film consists of bulk-like Au and Ni layers with interfaces of constant thickness.

[1]  J. Koehler.  Attempt to Design a Strong Solid , 1970 .

[2]  B. S. Berry,et al.  Effect of interdiffusion on the elasticity and internal friction of compositionally modulated copper-nickel thin films , 1976 .

[3]  J. Field.  The Properties of Diamond , 1979 .

[4]  A. S. Edelstein,et al.  Nanoindentation study of the mechanical properties of copper‐nickel multilayered thin films , 1990 .

[5]  Danner,et al.  Surface acoustic waves in Ni/V superlattices. , 1986, Physical review. B, Condensed matter.

[6]  D. Tabor.  Hardness of Metals , 1937, Nature.

[7]  Herbert F. Wang,et al.  Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook , 1971 .

[8]  Moreau,et al.  "Supermodulus effect" in Cu/Pd and Cu/Ni superlattices. , 1991, Physical review. B, Condensed matter.

[9]  A. Itoh,et al.  Magnetostriction of 3d‐transition metal/noble metal compositionally modulated multilayer films , 1988 .

[10]  J. T. Krause,et al.  Enhanced elastic moduli in Cu‐Ni films with compositional modulation , 1981 .

[11]  J. E. Hilliard,et al.  Mechanical properties of composition modulated Cu‐Ni foils , 1985 .

[12]  A. Jankowski.  Measurement of lattice strain in Au–Ni multilayers and correlation with biaxial modulus effects , 1992 .

[13]  J. E. Hilliard,et al.  Enhanced elastic modulus in composition‐modulated gold‐nickel and copper‐palladium foils , 1977 .

[14]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[15]  Tod A. Laursen,et al.  A study of the mechanics of microindentation using finite elements , 1992 .

[16]  William D. Nix,et al.  A method for interpreting the data from depth-sensing indentation instruments , 1986 .

[17]  J. E. Hilliard,et al.  Elastic modulus in composition‐modulated copper‐nickel foils , 1983 .

[18]  Grimsditch,et al.  Surface waves in Au/Cr superlattices. , 1987, Physical review. B, Condensed matter.

[19]  M. Grimsditch,et al.  Elastic Anomalies in Superlattices , 1990 .

[20]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[21]  B. Rodmacq,et al.  Interface effects and elastic constants of Ag/Ni superlattices studied by Brillouin scattering , 1992 .

[22]  Kumar,et al.  Evidence for the supermodulus effect and enhanced hardness in metallic superlattices. , 1991, Physical review. B, Condensed matter.

[23]  Clemens,et al.  Relationship between interfacial strain and the elastic response of multilayer metal films. , 1988, Physical review letters.

[24]  Charles Feldman,et al.  Distinguishing thin film and substrate contributions in microindentation hardness measurements , 1990 .

[25]  Falcó,et al.  Localized phonon modes in Fe-Pd multilayer structures. , 1986, Physical Review B (Condensed Matter).

[26]  Timothy P. Weihs,et al.  Mechanical deflection of cantilever microbeams: A new technique for testing the mechanical properties of thin films , 1988 .

[27]  Lee,et al.  Enhancement of the c11 elastic constant of Ag/Pd superlattice films as determined from longitudinal guided modes. , 1990, Physical review letters.

[28]  Ramnath Venkatraman,et al.  Separation of film thickness and grain boundary strengthening effects in Al thin films on Si , 1992 .

[29]  William D. Nix,et al.  Mechanical properties of thin films , 1989 .

[30]  J. E. Hilliard,et al.  Elastic modulus in composition‐modulated silver‐palladium and copper‐gold foils , 1983 .

[31]  A new ultrasonic method for measuring elastic moduli in unsupported thin films: Application to Cu‐Pd superlattices , 1990 .

[32]  A kinematic solution for plane-strain indentation of a bi-layer , 1985 .

[33]  A. Jankowski.  Lattice spacing variations in gold-nickel superlattices , 1989 .

[34]  M. Grimsditch,et al.  Effect of strain on the elastic properties of superlattices , 1986 .

[35]  Joost J. Vlassak,et al.  Indentation modulus of elastically anisotropic half spaces , 1993 .

[36]  M. Grimsditch,et al.  Anomalous Behavior of Surface Acoustic Waves in Cu/Nb Superlattices , 1982 .

[37]  M. Wall,et al.  Atomic imaging of Au/Ni multilayers , 1989 .