Influence of alloying elements on the microstructure evolution and mechanical properties in quenched and partitioned steels

[1]  R. Misra,et al.  Significance of control of austenite stability and three-stage work-hardening behavior of an ultrahigh strength–high ductility combination transformation-induced plasticity steel , 2013 .

[2]  Bing Chen,et al.  The effect of morphology on the stability of retained austenite in a quenched and partitioned steel , 2013 .

[3]  X. Wang,et al.  Mechanism exploration of an ultrahigh strength steel by quenching–partitioning–tempering process , 2011 .

[4]  Wenquan Cao,et al.  Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite , 2010 .

[5]  J. Sietsma,et al.  New low carbon Q&P steels containing film-like intercritical ferrite , 2010 .

[6]  G. Frommeyer,et al.  Effect of testing temperature and strain rate on the transformation behaviour of retained austenite in low-alloyed multiphase steel , 2009 .

[7]  R. Misra,et al.  Microstructure–hardness relationship in quenched and partitioned medium-carbon and high-carbon steels containing silicon , 2008 .

[8]  Roumen Petrov,et al.  Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steel , 2008 .

[9]  J. Speer,et al.  Effect of Retained Austenite Stabilized via Quench and Partitioning on the Strain Hardening of Martensitic Steels , 2008 .

[10]  Haitao Jiang,et al.  Process simulation and microstructure analysis of low carbon Si-Mn quenched and partitioned steel , 2008 .

[11]  D. Matlock,et al.  Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment , 2008 .

[12]  K. A. Padmanabhan,et al.  Transmission electron microscopy studies of thermomechanically control processed multiphase medium-carbon microalloyed steel: Forged, rolled, and low-cycle fatigued microstructures , 2006 .

[13]  Firoz Limalia.  COMPARISON OF ALUMINIUM GRAIN REFINED AND VANADIUM GRAIN REFINED SPRING STEELS FOR THE MANUFACTURE OF HIGHLY STRESSED AUTOMOTIVE COIL SPRINGS , 2006 .

[14]  S. Shanmugam,et al.  Microalloyed V–Nb–Ti and V steels Part 1 – Stereological study of ferrite–pearlite microstructure and its relationship to toughness , 2005 .

[15]  D. Matlock,et al.  Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation , 2004 .

[16]  D. Matlock,et al.  Carbon partitioning into austenite after martensite transformation , 2003 .

[17]  H. K. D. H. Bhadeshia,et al.  Partitioning of carbon from supersaturated ferrite plates , 1992 .

[18]  R. Hehemann,et al.  Retained Austenite and the Tempering of Martensite , 1960, Nature.

[19]  D. P. Koistinen,et al.  A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels , 1959 .