Micro/Nanospheres Generation by Fluid-Fluid Interaction Technology: A Literature Review.

This review focuses on the fundamental fluid mechanics which governs the generation of micro/nanospheres. The micro/nanosphere generation process has gathered significant attention in the past two decades, since micro/nanospheres are widely used in drug delivery, food science, cosmetics, and other application areas. Many methods have been developed based on different operating principles, such as microfluidic methods, electrospray methods, chemical methods, and so forth. This paper focuses on microfluidic methods. Although the structure of the microfluidic devices may be different, the operating principles behind them are often very similar. Following an initial discussion of the fluid mechanics related to the generation of microspheres, various design approaches are discussed, including T-junction, flow focusing, membrane emulsification, modified T-junction, and double emulsification methods. The advantages and problems associated with each method are also discussed. Next, the most commonly used computational fluid dynamics (CFD) methods are reviewed at three different levels: microscopic, mesoscopic, and macroscopic. Finally, the issues identified in the current literature are discussed, and some suggestions are offered regarding the future direction of technology development related to micro/nanosphere generation. Few relevant patents to the topic have been reviewed and cited.

[1]  Eric A. Grulke,et al.  Effect of Ultrasonication on Droplet Size in Biodiesel Mixtures , 2007 .

[2]  T. Inamuro,et al.  A lattice Boltzmann method for incompressible two-phase flows with large density differences , 2004 .

[3]  M. Ferrando,et al.  A procyanidin-rich extract encapsulated in water-in-oil-in-water emulsions produced by premix membrane emulsification , 2015 .

[4]  Joseph Katz,et al.  Vortex-corner interactions in a cavity shear layer elucidated by time-resolved measurements of the pressure field , 2013, Journal of Fluid Mechanics.

[5]  Uriel Frisch,et al.  Relation between the lattice Boltzmann equation and the Navier-Stokes equations , 1991 .

[6]  Synthesis of biocompatible and degradable microspheres based on 2‐hydroxyethyl methacrylate via microfluidic method , 2014 .

[7]  G. Patel,et al.  Application of nanohydrogels in drug delivery systems: recent patents review. , 2015, Recent patents on nanotechnology.

[8]  A Edris,et al.  Encapsulation of orange oil in a spray dried double emulsion. , 2001, Die Nahrung.

[9]  J. M. Rees,et al.  Simulations of microfluidic droplet formation using the two-phase level set method , 2011 .

[10]  M. Pathak Numerical simulation of membrane emulsification: Effect of flow properties in the transition from dr , 2011 .

[11]  Xavier Casadevall i Solvas,et al.  "V-junction": a novel structure for high-speed generation of bespoke droplet flows. , 2015, The Analyst.

[12]  M. Gallarate,et al.  On the stability of ascorbic acid in emulsified systems for topical and cosmetic use. , 1999, International journal of pharmaceutics.

[13]  Ranganathan Kumar,et al.  Droplet deformation and manipulation in an electrified microfluidic channel , 2013 .

[14]  T. Ono,et al.  Microfluidic fabrication of monodisperse polylactide microcapsules with tunable structures through rapid precipitation. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[15]  Xin Li,et al.  Flow field and pressure loss analysis of junction and its structure optimization of aircraft hydraulic pipe system , 2013 .

[16]  M. Dupin,et al.  Simulation of a microfluidic flow-focusing device. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[17]  Chun‐Mao Lin,et al.  C60 fullerene derivatized nanoparticles and their application to therapeutics. , 2012, Recent patents on nanotechnology.

[18]  P. Tabeling,et al.  Parallelised production of fine and calibrated emulsions by coupling flow-focusing technique and partial wetting phenomenon , 2014 .

[19]  P. Wilde,et al.  Comparative study of the stability of multiple emulsions containing a gelled or aqueous internal phase , 2014 .

[20]  Sung‐Wook Choi,et al.  Effect of flow rates of the continuous phase on droplet size in dripping and jetting regimes in a simple fluidic device for coaxial flow , 2014 .

[21]  Kensuke Yokoi,et al.  Efficient implementation of THINC scheme: A simple and practical smoothed VOF algorithm , 2007, J. Comput. Phys..

[22]  G. P. Agrawal,et al.  The Preparation and Evaluation of Albendazole Microspheres for Colonic Delivery , 2004 .

[23]  Yi Cheng,et al.  LBM simulation of droplet formation in micro-channels , 2011 .

[24]  Chuang-zhi Wu,et al.  Ultrasonic Preparation of Emulsions Derived from Aqueous Bio-oil Fraction and 0# Diesel and Combustion Characteristics in Diesel Generator , 2010 .

[25]  N. Nguyen,et al.  An investigation on the mechanism of droplet formation in a microfluidic T-junction , 2011 .

[26]  F. Mugele,et al.  Droplets Formation and Merging in Two-Phase Flow Microfluidics , 2011, International journal of molecular sciences.

[27]  Chung King Law,et al.  Regimes of coalescence and separation in droplet collision , 1997, Journal of Fluid Mechanics.

[28]  Michihisa Tsutahara,et al.  Three-dimensional lattice Boltzmann simulations of droplet formation in a cross-junction microchannel , 2008 .

[29]  Tsutomu Tanaka,et al.  Preparation of monodispersed polyelectrolyte microcapsules with high encapsulation efficiency by an electrospray technique , 2010 .

[30]  Charles A. Mullen,et al.  Maximizing the Stability of Pyrolysis Oil/Diesel Fuel Emulsions , 2014 .

[31]  Laura Schaefer,et al.  Equations of state in a lattice Boltzmann model , 2006 .

[32]  Howard A. Stone,et al.  Controllable Microfluidic Production of Microbubbles in Water‐in‐Oil Emulsions and the Formation of Porous Microparticles , 2008 .

[33]  E. Drioli,et al.  Droplet detachment in cross-flow membrane emulsification: Comparison among torque- and force-based models , 2008 .

[34]  Yonghao Zhang,et al.  Lattice Boltzmann simulation of droplet generation in a microfluidic cross-junction , 2011 .

[35]  Meng-Sing Liou,et al.  Accurate adaptive level set method and sharpening technique for three dimensional deforming interfaces , 2011 .

[36]  Zeqiang He,et al.  Influences of Process Variables on Size of Chitosan Microspheres , 2012 .

[37]  Helen Song,et al.  Formation of droplets and mixing in multiphase microfluidics at low values of the Reynolds and the capillary numbers , 2003 .

[38]  E. Drioli,et al.  Quantitative analysis of coupling effects in cross-flow membrane emulsification , 2004 .

[39]  A simple microfluidic device for fabrication of double emulsion droplets and polymer microcapsules , 2012 .

[40]  Ian M. Mitchell,et al.  A hybrid particle level set method for improved interface capturing , 2002 .

[41]  Zhixin Li,et al.  A lattice Boltzmann algorithm for fluid–solid conjugate heat transfer , 2007 .

[42]  Wei Shyy,et al.  A filter‐based, mass‐conserving lattice Boltzmann method for immiscible multiphase flows , 2011 .

[43]  Ernst Rank,et al.  Parallelization Strategies and Efficiency of CFD Computations in Complex Geometries Using Lattice Boltzmann Methods on High-Performance Computers , 2002 .

[44]  C. Trägårdh,et al.  Using the Surface Evolver to model droplet formation processes in membrane emulsification. , 2004, Journal of colloid and interface science.

[45]  Hans-Jürgen Butt,et al.  Physics and Chemistry of Interfaces , 2003 .

[46]  Minoru Seki,et al.  Interfacial Tension Driven Monodispersed Droplet Formation from Microfabricated Channel Array , 2001 .

[47]  J. Douglas,et al.  Microfluidic approach to the formation of internally porous polymer particles by solvent extraction. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[48]  M. Nakajima,et al.  Interfacial characteristics and microchannel emulsification of oleuropein-containing triglyceride oil–water systems , 2014 .

[49]  H. Wiggers,et al.  Monodisperse titania microspheres via controlled nanoparticle aggregation. , 2012, Physical chemistry chemical physics : PCCP.

[50]  A. Balabel Numerical simulation of two-dimensional binary droplets collision outcomes using the level set method , 2012 .

[51]  J. Grossiord,et al.  Insulin in w/o/w multiple emulsions: preparation characterization and determination of stability towards proteases in vitro. , 1997, Journal of microencapsulation.

[52]  Taehun Lee,et al.  Lattice Boltzmann simulations of bubble formation in a microfluidic T-junction , 2011, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[53]  G. Vladisavljević,et al.  Glass capillary microfluidics for production of monodispersed poly (DL-lactic acid) and polycaprolactone microparticles: experiments and numerical simulations. , 2014, Journal of colloid and interface science.

[54]  H. Stone,et al.  Transition from squeezing to dripping in a microfluidic T-shaped junction , 2008, Journal of Fluid Mechanics.

[55]  Chih-Yu Wang,et al.  Synthesis of uniform poly(d,l‐lactide) and poly(d,l‐lactide‐co‐glycolide) microspheres using a microfluidic chip for comparison , 2014, Electrophoresis.

[56]  R. Holdich,et al.  Preparation and characterization of PLGA particles for subcutaneous controlled drug release by membrane emulsification. , 2008, Colloids and surfaces. B, Biointerfaces.

[57]  Mitsutoshi Nakajima,et al.  The generation of highly monodisperse droplets through the breakup of hydrodynamically focused microthread in a microfluidic device , 2004 .

[58]  D. Weitz,et al.  Microfluidic assembly of multistage porous silicon-lipid vesicles for controlled drug release. , 2014, Lab on a chip.

[59]  H. Dureja,et al.  Recent Techniques and Patents on Solid Lipid Nanoparticles as Novel Carrier for Drug Delivery. , 2015, Recent Patents on Nanotechnology.

[60]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[61]  E. Drioli,et al.  Force balance conditions for droplet formation in cross-flow membrane emulsifications. , 2006, Journal of colloid and interface science.

[62]  A. Shono,et al.  Visualization and characterization of SPG membrane emulsification , 2002 .

[63]  Ilkka Turunen,et al.  Simulation of drop formation in a single hole in solvent extraction using the volume-of-fluid method , 2008 .

[64]  A. T. Sobczyk,et al.  Electrospraying route to nanotechnology: An overview , 2008 .

[65]  Takeshi Hatsuzawa,et al.  A microfluidic cross-flowing emulsion generator for producing biphasic droplets and anisotropically shaped polymer particles , 2010 .

[66]  Joseph Katz,et al.  Instantaneous pressure and material acceleration measurements using a four-exposure PIV system , 2006 .

[67]  Yonghao Zhang,et al.  Droplet formation in a T-shaped microfluidic junction , 2009 .

[68]  Remko M. Boom,et al.  Droplet formation in a T-shaped microchannel junction: A model system for membrane emulsification , 2005 .

[69]  Michał Januszewski,et al.  Three-dimensional binary-liquid lattice Boltzmann simulation of microchannels with rectangular cross sections , 2011 .

[70]  Robert Langer,et al.  Microfluidic platform for controlled synthesis of polymeric nanoparticles. , 2008, Nano letters.

[71]  C. Trägårdh,et al.  A model for drop size prediction during cross-flow emulsification , 2010 .

[72]  Peng Yuan,et al.  A mass conserving boundary condition for the lattice Boltzmann equation method , 2008, J. Comput. Phys..

[73]  C. Trägårdh,et al.  CFD modelling of drop formation in a liquid-liquid system , 2007 .

[74]  I. Norton,et al.  Comparisons between membranes for use in cross flow membrane emulsification , 2013 .

[75]  S. Turek,et al.  Benchmark computations based on Lattice-Boltzmann, Finite Element and Finite Volume Methods for laminar Flows , 2006 .

[76]  Pedro V. Baptista,et al.  Nanoparticle Drug Delivery Systems: Recent Patents and Applications in Nanomedicine , 2014 .

[77]  K. Lei Recent developments and patents on biological sensing using nanoparticles in microfluidic systems. , 2012, Recent Patents on Nanotechnology.

[78]  T. Chen,et al.  High Yield and High Loading Preparation of Curcumin-PLGA Nanoparticles Using a Modified Supercritical Antisolvent Technique , 2014 .

[79]  F. Chollet,et al.  New regime of droplet generation in a T-shape microfluidic junction , 2013 .

[80]  Liang-Yin Chu,et al.  Controllable monodisperse multiple emulsions. , 2007, Angewandte Chemie.

[81]  D. Voicu,et al.  Poly (lactic-co-glycolic acid) particles prepared by microfluidics and conventional methods. Modulated particle size and rheology. , 2015, Journal of colloid and interface science.

[82]  R. Boom,et al.  Lattice Boltzmann simulations of droplet formation in a T-shaped microchannel. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[83]  Anatol Jaworek,et al.  Micro- and nanoparticle production by electrospraying , 2007 .

[84]  A. Sosnik Production of drug-loaded polymeric nanoparticles by electrospraying technology. , 2014, Journal of biomedical nanotechnology.

[85]  C. Rodríguez-Abreu,et al.  Fabrication of novel silicone capsules with tunable mechanical properties by microfluidic techniques. , 2013, ACS applied materials & interfaces.

[86]  J. Sethian,et al.  Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations , 1988 .

[87]  Y. Wang,et al.  Formation of monodisperse cross-linked nanospherial condensates based on flow-focusing and droplet diffusion techniques , 2011 .

[88]  Richard A. Williams,et al.  Controlled Production of Emulsions Using a Crossflow Membrane: Part I: Droplet Formation from a Single Pore , 1998 .

[89]  W. J. Zhang,et al.  A Theoretical Analysis of the Concept of Critical Clearance Toward a Design Methodology for the Flip-Chip Package , 2007 .

[90]  Yong G. Lai,et al.  ACCURACY AND EFFICIENCY STUDY OF LATTICE BOLTZMANN METHOD FOR STEADY-STATE FLOW SIMULATIONS , 2001 .

[91]  Krishnaswamy Nandakumar,et al.  Control of the breakup process of viscous droplets by an external electric field inside a microfluidic device. , 2015, Soft matter.

[92]  H. Stone,et al.  Formation of dispersions using “flow focusing” in microchannels , 2003 .

[93]  Shan,et al.  Lattice Boltzmann model for simulating flows with multiple phases and components. , 1993, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[94]  Minseok Seo,et al.  Polymer particles with various shapes and morphologies produced in continuous microfluidic reactors. , 2005, Journal of the American Chemical Society.

[95]  Liangchi Zhang,et al.  Fabrication and application of polymer composites comprising carbon nanotubes. , 2007, Recent patents on nanotechnology.

[96]  Yuying Yan Recent advances in computational simulation of macro-, meso-, and micro-scale biomimetics related fluid flow problems , 2007, Journal of bionic engineering.

[97]  Li Zhang,et al.  Inertial migration of deformable droplets in a microchannel , 2014 .

[98]  M. Nakajima,et al.  Visualization of microfiltration phenomena using microscope video system and silicon microchannels , 1996 .

[99]  Jianfeng Chen,et al.  Preparation of Drug Nanoparticles Using a T-Junction Microchannel System , 2011 .

[100]  D. Weitz,et al.  Microfluidics-assisted engineering of polymeric microcapsules with high encapsulation efficiency for protein drug delivery. , 2014, International journal of pharmaceutics.

[101]  Yu-Cheng Lin,et al.  Use of an adjustable microfluidic droplet generator to produce uniform emulsions with different concentrations , 2013 .

[102]  Jianhong Xu,et al.  Experimental and theoretical approaches on droplet formation from a micrometer screen hole , 2005 .

[103]  Jonathan P. Rothstein,et al.  Scale-up and control of droplet production in coupled microfluidic flow-focusing geometries , 2012 .

[104]  Junfeng Zhang Lattice Boltzmann method for microfluidics: models and applications , 2011 .

[105]  G. Trägårdh,et al.  Membrane emulsification — a literature review , 2000 .

[106]  Enhancement of Fluid Mixing in a Double T-Shaped Micromixer by Periodic Disturbances of Pressure , 2011 .

[107]  Yu-Chuan Su,et al.  On-demand double emulsification utilizing pneumatically actuated, selectively surface-modified PDMS micro-devices , 2010 .

[108]  Masato Yoshino,et al.  Comparison of Accuracy and Efficiency between the Lattice Boltzmann Method and the Finite Difference Method in Viscous/Thermal Fluid Flows , 2004 .

[109]  Eugenia Kumacheva,et al.  Chitosan/agarose hydrogels: cooperative properties and microfluidic preparation. , 2014, Carbohydrate polymers.

[110]  H. Choi,et al.  Effect of formulation and processing variables on the characteristics of microspheres for water-soluble drugs prepared by w/o/o double emulsion solvent diffusion method. , 2000, International journal of pharmaceutics.

[111]  K. C. Kim,et al.  Numerical simulation of droplet formation in a micro-channel using the lattice Boltzmann method , 2008 .

[112]  Liang-Shih Fan,et al.  Experiment and lattice Boltzmann simulation of two-phase gas–liquid flows in microchannels , 2007 .

[113]  M. Nakajima,et al.  The influence of polysaccharide on the stability of protein stabilized oil-in-water emulsion prepared by microchannel emulsification technique , 2014 .

[114]  Scott D. Soelberg,et al.  Microfluidic one-step synthesis of alginate microspheres immobilized with antibodies , 2013, Journal of The Royal Society Interface.

[115]  D. Kandhai,et al.  A generic, mass conservative local grid refinement technique for lattice‐Boltzmann schemes , 2006 .

[116]  C. Kumar,et al.  Computational investigations of the mixing performance inside liquid slugs generated by a microfluidic T-junction. , 2014, Biomicrofluidics.

[117]  A. Abate,et al.  Surface acoustic wave (SAW) directed droplet flow in microfluidics for PDMS devices. , 2009, Lab on a chip.

[118]  M. Nakajima,et al.  Influence of temperature on production of water-in-oil emulsions by microchannel emulsification , 2012 .

[119]  N. Khalid,et al.  Formulation of monodisperse water-in-oil emulsions encapsulating calcium ascorbate and ascorbic acid 2-glucoside by microchannel emulsification , 2014 .

[120]  H. Gong,et al.  Formation of fully closed microcapsules as microsensors by microfluidic double emulsion , 2013 .

[121]  Mitsutoshi Nakajima,et al.  Production of uniform droplets using membrane, microchannel and microfluidic emulsification devices , 2012 .

[122]  Samin Akbari,et al.  Microfluidic encapsulation of cells in alginate particles via an improved internal gelation approach , 2013, Microfluidics and Nanofluidics.

[123]  A. Gañán-Calvo,et al.  Synthesis of lidocaine-loaded PLGA microparticles by flow focusing. Effects on drug loading and release properties. , 2008, International journal of pharmaceutics.

[124]  Peng Li,et al.  Surface acoustic wave microfluidics. , 2013, Lab on a chip.

[125]  Lichun Dong,et al.  CFD Simulation of Droplet Formation in a Wide-Type Microfluidic T-Junction , 2012 .

[126]  Toru Torii,et al.  Controlled production of monodisperse double emulsions by two-step droplet breakup in microfluidic devices. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[127]  N. Nguyen,et al.  Optical detection for droplet size control in microfluidic droplet-based analysis systems , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[128]  Masamichi Oishi,et al.  Study on the mechanism of droplet formation in T-junction microchannel , 2012 .

[129]  S. Zaleski,et al.  Lattice Boltzmann model of immiscible fluids. , 1991, Physical review. A, Atomic, molecular, and optical physics.

[130]  L. Thibodeaux,et al.  Effect of surfactant on the dynamics of a crude oil droplet in water column: Experimental and numerical investigation , 2014 .