Electrodeposited and Sol-gel Precipitated p-type SrTi1-xFexO3-δ Semiconductors for Gas Sensing

In the present contribution, three methods for the preparation of nanoscaled SrTi1-xFexO3-δ sensor films for hydrocarbon sensing were investigated. Besides screen-printed thick films based on sol-precipitated nanopowders, two novel synthesis methods, electrospinning and electrospraying, were tested successfully. All of these sensor devices showed improved sensor functionality in comparison to conventional microscaled thick films. In order to explain the impact of the enhanced surface-to-volume ratio on sensor properties in a quantitative way, a mechanistic model was applied to micro- and nanoscaled devices. In contrast to the conventional diffusion-reaction model that has been proposed for n-type semiconducting sensors, it contained novel approaches with respect to the microscopic mechanism. With very few fit variables, the present model was found to represent well sensor functionality of p-type conducting SrTi0.8Fe0.2O3-δ films. In addition to the temperature dependency of the sensor response, the effect of the specific surface area on the sensor response was predicted.

[1]  Z. Wang.  Nanobelts, Nanowires, and Nanodiskettes of Semiconducting Oxides—From Materials to Nanodevices , 2003 .

[2]  Ralf Moos,et al.  Selectivity enhancement of p-type semiconducting hydrocarbon sensors—The use of sol-precipitated nano-powders , 2008 .

[3]  G. Sergeev,et al.  Preparation and chemiresistive properties of nanostructured materials. , 2005, Advances in colloid and interface science.

[4]  F. A. Kröger,et al.  Relations between the Concentrations of Imperfections in Crystalline Solids , 1956 .

[5]  D. Tsipas,et al.  Review on the Production and Synthesis of Nanosized SnO2 , 2005 .

[6]  Matteo Ferroni,et al.  Nanostructured mixed oxides compounds for gas sensing applications , 2002 .

[7]  G. Martinelli,et al.  Preparation of nanosized titania thick and thin films as gas-sensors , 1999 .

[8]  Ralf Moos,et al.  Hydrocarbon sensing with thick and thin film p-type conducting perovskite materials , 2005 .

[9]  Kengo Shimanoe,et al.  Theory of gas-diffusion controlled sensitivity for thin film semiconductor gas sensor , 2001 .

[10]  K. Sahner,et al.  Modeling of hydrocarbon sensors based on p-type semiconducting perovskites. , 2007, Physical chemistry chemical physics : PCCP.

[11]  Ralf Moos,et al.  Temperature-independent resistive oxygen exhaust gas sensor for lean-burn engines in thick-film technology , 2003 .

[12]  V. Weekman,et al.  Chemical Reaction Engineering , 1974 .

[13]  M. Baraton.  Surface Chemistry and Functionalization of Semiconducting Nanosized Particles , 2003 .

[14]  J. Maier,et al.  Oxygen incorporation into Fe-doped SrTiO3: Mechanistic interpretation of the surface reaction , 2002 .

[15]  G. Meng,et al.  Fine SrTiO3 and Sr(Mg0.4Ti0.6)O3–δperovskite ceramic powders prepared by a sol-precipitation process , 2001 .