Development of new polyolefin films with nanoclays for application in food packaging

Nanomaterials have been demonstrated to possess novel characteristics that can be applied in developing new packaging with better properties than packaging produced with micromaterials. Such developments include the production of packaging with improved barrier properties, which applied to the food industry will extend the shelf life of a food, thereby expanding its marketing potential. The present study entailed the optimization of experimental variables (pressure, temperature, processing time, feed position, etc.) involved in the elaboration of polypropylene and polyethylene films with nanoparticles, to obtain a film with good exfoliation, barrier and mechanical properties. SEM, TEM and XRD were also evaluated as tools for determining the degree of exfoliation of nanoparticles. Optimization of the technology involved in production of an exfoliated nanocompound is a complex process in which multiple variables and parameters are involved. The results of the study showed that the feed position of the nanoparticle in the double screw extruder is of vital importance in obtaining an exfoliated film. The maximum temperatures used in the extruder were 170 °C and 130 °C, for polypropylene and polyethylene respectively.

[1]  Thomas J. Pinnavaia,et al.  Polymer-layered silicate nanocomposites: an overview , 1999 .

[2]  Jin-Kook Lee,et al.  Preparation and Characterization of Poly(butyleneterephthalate)/Organoclay Nanocomposites , 2001 .

[3]  Suprakas Sinha Ray,et al.  POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .

[4]  Weibing Xu,et al.  Preparation and characterization of PE and PE-g-MAH/montmorillonite nanocomposites , 2004 .

[5]  Yong Zhang,et al.  Effect of different clay treatment on morphology and mechanical properties of PVC-clay nanocomposites , 2003 .

[6]  C. Nah,et al.  Polyurethane/montmorillonite nanocomposites prepared from crystalline polyols, using 1,4-butanediol and organoclay hybrid as chain extenders , 2004 .

[7]  A. Okada,et al.  Preparation and Mechanical Properties of Polypropylene−Clay Hybrids , 1997 .

[8]  D. Macfarlane,et al.  The enhancement of lithium ion dissociation in polyelectrolyte gels on the addition of ceramic nano-fillers , 2004 .

[9]  D. Gournis,et al.  Nanocomposites of polystyrene-b-polyisoprene copolymer with layered silicates and carbon nanotubes , 2006 .

[10]  W. Pan,et al.  Preparation and crystallization behaviour of PP/PP-g-MAH/Org-MMT nanocomposite , 2003 .

[11]  Yukun Yang,et al.  Synthesis of exfoliated polystyrene/montmorillonite nanocomposite by emulsion polymerization using a zwitterion as the clay modifier , 2005 .

[12]  Youn-Sik Lee,et al.  Exfoliated high-impact polystyrene/MMT nanocomposites prepared using anchored cationic radical initiator-MMT hybrid , 2005 .

[13]  R. E. Smallman,et al.  An assessment of high voltage electron microscopy (HVEM). An invited review , 1977 .

[14]  C. A. Wilkie,et al.  In situ reactive blending to prepare polystyrene-clay and polypropylene-clay nanocomposites , 2003 .

[15]  Marcus Gibson.  Art of the butterflies [nanostructures] , 2003 .

[16]  D. Yan,et al.  Crystallization, morphology, and dynamic mechanical properties of poly(trimethylene terephthalate)/clay nanocomposites , 2003 .

[17]  Defeng Wu,et al.  Study on rheological behaviour of poly(butylene terephthalate)/montmorillonite nanocomposites , 2005 .

[18]  A. Balazs,et al.  Modeling the Interactions between Polymers and Clay Surfaces through Self-Consistent Field Theory , 1998 .

[19]  P. Dubois,et al.  Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials , 2000 .

[20]  R. Chang,et al.  Synthesis and characterization of aluminum borate (Al18B4O33, Al4B2O9) nanowires and nanotubes , 2006 .

[21]  R. Kotsilkova,et al.  Thermal Analysis of Polymer-silicate Nanocomposites , 2001 .

[22]  S. Qutubuddin,et al.  Synthesis of poly(methyl methacrylate) nanocomposites via emulsion polymerization using a zwitterionic surfactant. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[23]  B. Gnade,et al.  Exfoliated and intercalated polyamide-imide nanocomposites with montmorillonite , 2002 .

[24]  R. Mülhaupt,et al.  Synthesis and thermal behaviour of layered silicate-EVA nanocomposites , 2001 .

[25]  Cemal Cem Tasan,et al.  Effects of production parameters on the structure of resol type phenolic resin/layered silicate nanocomposites , 2006 .

[26]  Emmanuel P. Giannelis,et al.  Polymer-layered silicate nanocomposites: Synthesis, properties and applications , 1998 .

[27]  T. Kwei,et al.  Organic-inorganic polymeric hybrids involving novel poly(hydroxymethylsiloxane , 1995 .

[28]  M. Mizuhata,et al.  Nanofabrication of metal oxide thin films and nano-ceramics from aqueous solution , 2004 .

[29]  Miao Sheng,et al.  A Polyethylene Nanocomposite Prepared via In-Situ Polymerization , 2001 .

[30]  S. Bourbigot,et al.  Kinetic modelling of the thermal degradation: of polyamide-6 nanocomposite , 2000 .

[31]  B. Chisholm,et al.  Nanocomposites derived from sulfonated poly(butylene terephthalate) , 2002 .

[32]  Abdelsamie Moet,et al.  Reduction of residual stress in montmorillonite/epoxy compounds , 1994, Journal of Materials Science.

[33]  Jin-Hae Chang,et al.  Nanocomposites of poly(ethylene terephthalate-co-ethylene naphthalate) with organoclay , 2001 .

[34]  T. Kurauchi,et al.  Synthesis of polypropylene-clay hybrid , 1997 .

[35]  R. Vaia,et al.  Polymer Melt Intercalation in Organically-Modified Layered Silicates: Model Predictions and Experiment , 1997 .

[36]  S. Lofland,et al.  Nanorods of manganese oxalate: a single source precursor to different manganese oxide nanoparticles (MnO, Mn2O3, Mn3O4) , 2004 .

[37]  D. Pochan,et al.  Poly (l-Lactic Acid)/Layered Silicate Nanocomposite: Fabrication, Characterization, and Properties , 2003 .

[38]  E. Harth,et al.  Production of crosslinked, hollow nanoparticles by surface‐initiated living free‐radical polymerization , 2002 .

[39]  D. Hatchett,et al.  Chemical and electrochemical synthesis of polyaniline/platinum composites , 2006 .

[40]  R. Vaia,et al.  Kinetics of polymer melt intercalation , 1995 .

[41]  A. Hiltner,et al.  Nanoscale highly filled epoxy nanocomposite , 2002 .

[42]  L. J. Lee,et al.  Poly(methyl methacrylate) and polystyrene/clay nanocomposites prepared by in-situ polymerization , 2001 .

[43]  M. Šlouf,et al.  Preparation and properties of compatibilized LDPE/organo-modified montmorillonite nanocomposites , 2005 .

[44]  E. Giannelis,et al.  Rheology of End-Tethered Polymer Layered Silicate Nanocomposites , 1997 .

[45]  Edwin Metcalfe,et al.  Nanocomposite fire retardants — a review , 2000 .

[46]  A. Balazs,et al.  Modeling the phase behavior of polymer-clay composites , 1998 .

[47]  W. Fan,et al.  Preparation and characterization of poly(butylene terephthalate) nanocomposites from thermally stable organic-modified montmorillonite , 2005 .

[48]  D. Mielewski,et al.  Exfoliation and dispersion enhancement in polypropylene nanocomposites by in‐situ melt phase ultrasonication , 2004 .

[49]  J. Cayer-Barrioz,et al.  Microstructure and mechanical behavior of polyamide 66‐precipitated calcium carbonate composites: Influence of the particle surface treatment , 2006 .

[50]  F. Beyer,et al.  Mechanical response and rheological properties of polycarbonate layered-silicate nanocomposites , 2004 .

[51]  C. Sammon,et al.  Diffusion of water and acetone into poly(vinyl alcohol)–clay nanocomposites using ATR-FTIR , 2004 .

[52]  Wentao Xu,et al.  Nonisothermal crystallization kinetics of polyoxymethylene/montmorillonite nanocomposite , 2001 .

[53]  Xiao-hui Liu,et al.  PP/clay nanocomposites prepared by grafting-melt intercalation , 2001 .

[54]  E. Giannelis,et al.  On The Origins of Silicate Dispersion in Polysiloxane/Layered‐Silicate Nanocomposites , 2006 .

[55]  Hiroaki Kadoura,et al.  Three-Dimensional Observation of Structure and Morphology in Nylon-6/Clay Nanocomposite , 2001 .

[56]  W. R. Murphy,et al.  Preparation and Properties of Polyolefin-Clay Nanocomposites , 2004 .

[57]  B. Guo,et al.  Preparation and structure of highly confined intercalated polystyrene/montmorillonite nanocomposite via a two-step method , 2005 .

[58]  Jing Xu,et al.  Preparation of poly(propylene carbonate)/organo-vermiculite nanocomposites via direct melt intercalation , 2005 .

[59]  J. Kressler,et al.  Synthesis and structure of poly(ε-caprolactone)/synthetic montmorillonite nano-intercalates , 2004 .

[60]  J. E. Mark.  Ceramic‐reinforced polymers and polymer‐modified ceramics , 1996 .

[61]  Xiao-hui Liu,et al.  Polyamide 66/Clay Nanocomposites via Melt Intercalation , 2002 .

[62]  Changchun Zeng,et al.  Processing and properties of polymeric nano-composites , 2001 .

[63]  Chi Hu,et al.  Preparation and rheological characterization of poly(n-butyl methacrylate)/montmorillonite composites , 2006 .

[64]  A. Usuki,et al.  Silicate layer exfoliation in polyolefin/clay nanocomposites based on maleic anhydride modified polyolefins and organophilic clay , 2004 .

[65]  J. Karger‐Kocsis,et al.  Effect of maleic anhydride-grafted ethylene–propylene rubber on the mechanical, rheological and morphological properties of organoclay reinforced polyamide 6/polypropylene nanocomposites , 2005 .

[66]  M. Hedenqvist,et al.  Barrier and mechanical properties of injection molded montmorillonite/polyesteramide nanocomposites , 2005 .

[67]  Chen Long,et al.  Crystallization, properties, and crystal and nanoscale morphology of PET–clay nanocomposites , 1999 .

[68]  R. Vaia,et al.  Synthesis of Polycarbonate-Layered Silicate Nanocomposites via Cyclic Oligomers , 2000 .