On modelling of damage evolution in textile composites on meso-level via property degradation approach

Abstract The continuous damage mechanics (CDM) approach is a popular tool for modelling of damage evolution in textile composites on the meso-level. It is based on the assumption that a material with defects can be replaced by a fictitious material with no defects but with degraded elastic constants. In such way the presence of defects is only reflected in the material elastic properties and damage evolution is recorded through the loss of these properties. The CDM approach incorporated into finite element analysis often predicts unphysically wide damage zones and in some cases failure across yarns – findings that are not supported by experimental data. The current work is geared toward identifying the source of inconsistencies between experiment and modelling by revisiting basic assumptions of CDM. A test problem is proposed to illustrate a break down of the CDM approach where a single crack-like defect in a yarn is modelled as an inhomogeneity with elastic constants reduced according to Murakami–Ohno model. It is shown that CDM in combination with local stress analysis of failure may predict a different direction of damage evolution as well as an incorrect failure mode in comparison with the crack problem. We also investigate whether the Murakami–Ohno model adopted for calculation of properties of a fictitious inhomogeneity contributes to the unphysical results. For this we compare contributions of a crack and an inhomogeneity into material elastic response. A new property degradation procedure is suggested (referred here as an effective elastic response model) where the size of an inhomogeneity and properties of the surrounding material are taken into account.

[1]  J. D. Eshelby The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[2]  O. Hoffman The Brittle Strength of Orthotropic Materials , 1967 .

[3]  John D. Whitcomb,et al.  Progressive Failure Behaviors of 2D Woven Composites , 2003 .

[4]  S. Murakami,et al.  Mechanical Modeling of Material Damage , 1988 .

[5]  M. Hinton Failure Criteria in Fibre-Reinforced-Polymer Composites: The World-Wide Failure Exercise , 2004 .

[6]  T. Takeda,et al.  Deformation and progressive failure behavior of woven-fabric-reinforced glass/epoxy composite laminates under tensile loading at cryogenic temperatures , 2005 .

[7]  I. Verpoest,et al.  Damage initiation and development in triaxial braid and fine structure of damage , 2006 .

[8]  Leif Asp,et al.  Formation of damage and its effects on non-crimp fabric reinforced composites loaded in tension , 2004 .

[9]  Donald M. Blackketter,et al.  Modeling Damage in a Plain Weave Fabric-Reinforced Composite Material , 1993 .

[10]  Mark Kachanov,et al.  Elastic Solids with Many Cracks and Related Problems , 1993 .

[11]  Andrew C. Long,et al.  Finite element modelling of damage progression in non-crimp fabric reinforced composites , 2006 .

[12]  Masaru Zako,et al.  Finite element analysis of damaged woven fabric composite materials , 2003 .

[13]  Igor Tsukrov,et al.  Handbook of elasticity solutions , 2003 .

[14]  J. Lemaître A CONTINUOUS DAMAGE MECHANICS MODEL FOR DUCTILE FRACTURE , 1985 .

[15]  Naoki Takano,et al.  Hierarchical modelling of textile composite materials and structures by the homogenization method , 1999 .

[16]  Ignaas Verpoest,et al.  Homogenisation of a sheared unit cell of textile composites , 2005 .

[17]  S. L. Ogin,et al.  Damage accumulation in woven-fabric CFRP laminates under tensile loading: Part 1. Observations of damage accumulation , 1999 .

[18]  I. Kunin,et al.  Elastic Media with Microstructure II , 1982 .

[19]  Gianni Nicoletto,et al.  Failure mechanisms in twill-weave laminates: FEM predictions vs. experiments , 2004 .

[20]  L. Gorbatikh,et al.  Elastic compliance of a partially debonded circular inhomogeneity , 2005 .

[21]  Z. Aboura,et al.  A micromechanics model for 3D elasticity and failure of woven-fibre composite materials , 1999 .

[22]  Ala Tabiei,et al.  Materially and geometrically non-linear woven composite micro-mechanical model with failure for finite element simulations , 2004 .

[23]  John D. Whitcomb,et al.  Effect of Various Parameters on Effective Engineering Properties of 2 × 2 Braided Composites , 2005 .

[24]  Ignace Verpoest,et al.  Meso-FE modelling of textile composites: Road map, data flow and algorithms , 2007 .

[25]  Y. Chou,et al.  Generalized Plane Problems of Elastic Inclusions in Anisotropic Solids , 1976 .

[26]  Ignace Verpoest,et al.  Experimental methodology of study of damage initiation and development in textile composites in uniaxial tensile test , 2006 .