Triaxial tests on snow at low strain rate. Part II. Constitutive behaviour

Abstract Fine-grained, dry snow with a density range of 190–435 kg m−3 was tested in triaxial compression at −12°C with confining pressures varying between 0 and 40 kPa. The tests were strain-rate controlled, with strain rates ranging between 7.4 × 10−7 s−1 and 6.6 × 10−5 s−1. The analysis of the test results revealed that the relationship between yield stress and viscous strain rate is best given by a power law, similar to polycrystalline ice. However, the power-law exponent n is a function of density and varies between 1.8 (low-density snow, ρ < 200 kg m−3) and 3.6 (high-density snow, ρ > 320 kg m−3). The tests also showed that lower-density snow displays a significant non-linear stress–strain response before yielding. Two further aspects of the constitutive behaviour of snow were identified: (1) the strainrate independence of the post-yield work-hardening behaviour in compression and (2) the independence of the axial yield stress in relation to the confining pressure. The experimental observations are discussed with respect to the mechanical properties of polycrystalline ice, which is the constituent material of the load-bearing ice skeleton.