A finite element model of the cardiac ventricles with coupled circulation: Biventricular mesh generation with hexahedral elements, airbags and a functional mockup interface to the circulation

INTRODUCTION Finite element (FE) mechanics models of the heart are becoming more sophisticated. However, there is lack of consensus about optimal element type and coupling of FE models to the circulation. We describe biventricular (left (LV) and right (RV) ventricles) FE mechanics model creation using hexahedral elements, airbags and a functional mockup interface (FMI) to lumped-parameter models of the circulation. METHODS Cardiac MRI (CMR) was performed in two healthy volunteers and a single patient with ischemic heart disease (IHD). CMR images were segmented and surfaced, meshing with hexahedral elements was performed with a "thin butterfly with septum" topology. LV and RV inflow and outflow airbags were coupled to lumped-parameter circulation models with an FMI interface. Pulmonary constriction (PAC) and vena cava occlusion (VCO) were simulated and end-systolic pressure-volume relations (ESPVR) were calculated. RESULTS Mesh construction was prompt with representative contouring and mesh adjustment requiring 32 and 26 min Respectively. The numbers of elements ranged from 4104 to 5184 with a representative Jacobian of 1.0026 ± 0.4531. Agreement between CMR-based surfaces and mesh was excellent with root-mean-squared error of 0.589 ± 0.321 mm. The LV ESPVR slope was 3.37 ± 0.09 in volunteers but 2.74 in the IHD patient. The effect of PAC and VCO on LV ESPVR was consistent with ventricular interaction (p = 0.0286). CONCLUSION Successful co-simulation using a biventricular FE mechanics model with hexahedral elements, airbags and an FMI interface to lumped-parameter model of the circulation was demonstrated. Future studies will include comparison of element type and study of cardiovascular pathologies and device therapies.

[1]  Samuel T Wall,et al.  Electromechanical feedback with reduced cellular connectivity alters electrical activity in an infarct injured left ventricle: a finite element model study. , 2012, American journal of physiology. Heart and circulatory physiology.

[2]  Adarsh Krishnamurthy,et al.  An atlas-based geometry pipeline for cardiac Hermite model construction and diffusion tensor reorientation , 2012, Medical Image Anal..

[3]  Viatcheslav Gurev,et al.  Models of cardiac electromechanics based on individual hearts imaging data , 2011, Biomechanics and modeling in mechanobiology.

[4]  Adarsh Krishnamurthy,et al.  Patient-specific models of cardiac biomechanics , 2013, J. Comput. Phys..

[5]  M. Nash,et al.  Image-Based Predictive Modeling of Heart Mechanics. , 2015, Annual review of biomedical engineering.

[6]  L. Ge,et al.  Biventricular finite element modeling of the Acorn CorCap Cardiac Support Device on a failing heart. , 2013, The Annals of thoracic surgery.

[7]  Javier Fernández de Cañete,et al.  Object-oriented modeling and simulation of the closed loop cardiovascular system by using SIMSCAPE , 2013, Comput. Biol. Medicine.

[8]  A D McCulloch,et al.  Mechanics of active contraction in cardiac muscle: Part II--Cylindrical models of the systolic left ventricle. , 1993, Journal of biomechanical engineering.

[9]  Roy C. P. Kerckhoffs,et al.  Coupling of a 3D Finite Element Model of Cardiac Ventricular Mechanics to Lumped Systems Models of the Systemic and Pulmonic Circulation , 2006, Annals of Biomedical Engineering.

[10]  Adarsh Krishnamurthy,et al.  A framework for biomechanics simulations using four-chamber cardiac models. , 2019, Journal of biomechanics.

[11]  J. S. Rankin,et al.  Dynamic Ventricular Interaction in the Conscious Dog , 1983, Circulation research.

[12]  Mehrdad Soleimani,et al.  A coupled biventricular finite element and lumped-parameter circulatory system model of heart failure , 2013, Computer methods in biomechanics and biomedical engineering.

[13]  S A Glantz,et al.  End-systolic and end-diastolic ventricular interaction. , 1986, The American journal of physiology.

[14]  David Saloner,et al.  A computationally efficient formal optimization of regional myocardial contractility in a sheep with left ventricular aneurysm. , 2009, Journal of biomechanical engineering.

[15]  J M Guccione,et al.  Mechanism underlying mechanical dysfunction in the border zone of left ventricular aneurysm: a finite element model study. , 2001, The Annals of thoracic surgery.

[16]  Manfred Liebmann,et al.  Anatomically accurate high resolution modeling of human whole heart electromechanics: A strongly scalable algebraic multigrid solver method for nonlinear deformation , 2016, J. Comput. Phys..

[17]  A. Haufe,et al.  Airbag Simulation with LS-DYNA Past - Present - Future , 2007 .

[18]  L. Ge,et al.  Left ventricular geometry during unloading and the end-systolic pressure volume relationship: Measurement with a modified real-time MRI-based method in normal sheep , 2020, PloS one.

[19]  Yubing Shi,et al.  Review of Zero-D and 1-D Models of Blood Flow in the Cardiovascular System , 2011, Biomedical engineering online.

[20]  Mechanical effects of MitraClip on leaflet stress and myocardial strain in functional mitral regurgitation – A finite element modeling study , 2019, PloS one.

[21]  Thomas Fritz,et al.  Verification of cardiac mechanics software: benchmark problems and solutions for testing active and passive material behaviour , 2015, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[22]  Julius M. Guccione,et al.  In Vivo Left Ventricular Geometry and Boundary Conditions , 2010 .

[23]  A. McCulloch,et al.  Finite element stress analysis of left ventricular mechanics in the beating dog heart. , 1995, Journal of biomechanics.

[24]  A. McCulloch,et al.  Passive material properties of intact ventricular myocardium determined from a cylindrical model. , 1991, Journal of biomechanical engineering.

[25]  Elmar Ahle,et al.  The Functional Mockup Interface - seen from an industrial perspective , 2014 .

[26]  Viatcheslav Gurev,et al.  A high-resolution computational model of the deforming human heart , 2015, Biomechanics and modeling in mechanobiology.

[27]  L. Ge,et al.  Finite-element based optimization of left ventricular passive stiffness in normal volunteers and patients after myocardial infarction: Utility of an inverse deformation gradient calculation of regional diastolic strain. , 2021, Journal of the mechanical behavior of biomedical materials.

[28]  Gabriel Acevedo-Bolton,et al.  Partial LVAD restores ventricular outputs and normalizes LV but not RV stress distributions in the acutely failing heart in silico , 2016, The International journal of artificial organs.

[29]  Ellen Kuhl,et al.  The Living Heart Project: A robust and integrative simulator for human heart function. , 2014, European journal of mechanics. A, Solids.

[30]  Hang Si,et al.  TetGen, a Delaunay-Based Quality Tetrahedral Mesh Generator , 2015, ACM Trans. Math. Softw..

[31]  Alistair A. Young,et al.  Creating shape templates for patient specific biventricular modeling in congenital heart disease , 2015, 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[32]  Pablo Lamata,et al.  An accurate, fast and robust method to generate patient-specific cubic Hermite meshes , 2011, Medical Image Anal..

[33]  L. Lee,et al.  High Spatial Resolution Multi-Organ Finite Element Modeling of Ventricular-Arterial Coupling , 2018, Front. Physiol..

[34]  Serdar Göktepe,et al.  A multiscale model for eccentric and concentric cardiac growth through sarcomerogenesis. , 2010, Journal of theoretical biology.

[35]  J. Sundnes,et al.  COMPARISON OF TETRAHEDRAL AND HEXAHEDRAL MESHES FOR FINITE ELEMENT SIMULATION OF CARDIAC ELECTRO-MECHANICS , 2016 .

[36]  Wei Sun,et al.  A Comprehensive Engineering Analysis of Left Heart Dynamics After MitraClip in a Functional Mitral Regurgitation Patient , 2020, Frontiers in Physiology.

[37]  T. Korakianitis,et al.  Numerical simulation of cardiovascular dynamics with healthy and diseased heart valves. , 2006, Journal of biomechanics.

[38]  David S. Li,et al.  A Computational Cardiac Model for the Adaptation to Pulmonary Arterial Hypertension in the Rat , 2018, Annals of Biomedical Engineering.

[39]  S. Ommen,et al.  Clinical Utility of Doppler Echocardiography and Tissue Doppler Imaging in the Estimation of Left Ventricular Filling Pressures: A Comparative Simultaneous Doppler-Catheterization Study , 2000, Circulation.

[40]  Theo Arts,et al.  Pacific Symposium on Biocomputing 13:378-389(2008) MODELING VENTRICULAR INTERACTION: A MULTISCALE APPROACH FROM SARCOMERE MECHANICS TO CARDIOVASCULAR SYSTEM , 2022 .

[41]  Sébastien Ourselin,et al.  The estimation of patient-specific cardiac diastolic functions from clinical measurements , 2012, Medical Image Anal..

[42]  Justin W. Fernandez,et al.  Anatomically based geometric modelling of the musculo-skeletal system and other organs , 2004, Biomechanics and modeling in mechanobiology.

[43]  A P Yoganathan,et al.  Review of hydrodynamic principles for the cardiologist: applications to the study of blood flow and jets by imaging techniques. , 1988, Journal of the American College of Cardiology.

[44]  R S Reneman,et al.  Dependence of local left ventricular wall mechanics on myocardial fiber orientation: a model study. , 1992, Journal of biomechanics.

[45]  Gabriel Bernardino,et al.  A rule‐based method to model myocardial fiber orientation in cardiac biventricular geometries with outflow tracts , 2018, International journal for numerical methods in biomedical engineering.

[46]  Tomas Akenine-Möller,et al.  Fast, Minimum Storage Ray-Triangle Intersection , 1997, J. Graphics, GPU, & Game Tools.

[47]  James F. O'Brien,et al.  Shape transformation using variational implicit functions , 1999, SIGGRAPH Courses.

[48]  Viatcheslav Gurev,et al.  Electromechanical models of the ventricles. , 2011, American journal of physiology. Heart and circulatory physiology.

[49]  Kenji Shimada,et al.  Evaluation of user-guided semi-automatic decomposition tool for hexahedral mesh generation , 2017, J. Comput. Des. Eng..

[50]  J. Teuteberg,et al.  Right ventricular failure after left ventricular assist devices. , 2015, The Journal of heart and lung transplantation : the official publication of the International Society for Heart Transplantation.

[51]  C. A. Figueroa,et al.  Multiscale Modeling Framework of Ventricular-Arterial Bi-directional Interactions in the Cardiopulmonary Circulation , 2020, Frontiers in Physiology.

[52]  M. Gatzoulis,et al.  The right ventricle in congenital heart disease , 2006, Heart.