Effects of Ultrasound Treatment on the Upgradation of Heavy Gas Oil

Catalytic hydrotreating is the most effective process for upgrading heavy gas oil. However, the operating conditions such as high temperatures (633−673 K), high pressures (8.6−8.9 MPa), and consumption of large amounts of catalyst and hydrogen place constraints and limitations on the process. In this investigation the ultrasonic energy is used to treat the heavy gas oil (HGO) without the use of any additives at atmospheric pressure. The lighter gas hydrocarbons given off during the ultrasonic treatment of HGO were identified as methane, ethylene, ethane, and propylene. The basic nitrogen-containing compounds in HGO were more easily cleaved by cavitational energy than that of nonbasic compound. A maximum nitrogen and sulfur conversion of 11% and 7%, respectively, and a 5% reduction in the viscosity were obtained at the optimized sonochemical conditions. A radical chain mechanism is proposed to demonstrate the reactions of hydrocarbons initiated by ultrasound.

[1]  M. Gray,et al.  Resistant nitrogen compounds in hydrotreated gas oil from Athabasca bitumen , 1991 .

[2]  S. Bhatia,et al.  Catalytic upgrading of petroleum residual oil by hydrotreating catalysts: a comparison between dispersed and supported catalysts , 1998 .

[3]  O. Krüger,et al.  Sonochemical treatment of natural ground water at different high frequencies: preliminary results. , 1999, Ultrasonics sonochemistry.

[4]  J. Shaw,et al.  Hydrogen solubility measurements in heavy oil and bitumen cuts , 2001 .

[5]  W. J. Hatcher,et al.  Hydrodenitrogenation of quinoline with Y-type zeolite , 1989 .

[6]  F. Berruti,et al.  THE EFFECTS OF ULTRASONIC TREATMENT ON THE VISCOSITY OF ATHABASCA BITUMEN AND BITUMEN-SOLVENT MIXTURES , 1993 .

[7]  D. Golden,et al.  Organometallic bond dissociation energies: laser pyrolysis of iron pentacarbonyl, chromium hexacarbonyl, molybdenum hexacarbonyl, and tungsten hexacarbonyl , 1984 .

[8]  S. Shedid.  A NOVEL TECHNIQUE OF ASPHALTENE DEPOSITION TREATMENT USING ULTRASONIC IRRADIATION , 2002 .

[9]  Alfred Weissler,et al.  Sonochemistry: The Production of Chemical Changes with Sound Waves , 1953 .

[10]  M. Nagai,et al.  Hydrodenitrogenation of carbazole on a molybdenum/alumina catalyst. Effects of sulfiding and sulfur compounds , 1988 .

[11]  K. Suslick,et al.  Heterogeneous sonocatalysis with nickel powder , 1987 .

[12]  A. Henglein,et al.  Sonochemistry : historical developments and modern aspects , 1987 .

[13]  D. Duprez,et al.  An optimized route for the preparation of well dispersed supported ruthenium catalysts , 2002 .

[14]  J. Katzer,et al.  Process and Catalyst Needs for Hydrodenitrogenation , 1980 .

[15]  V. Ragaini,et al.  Preparation of highly dispersed CuO catalysts on oxide supports for de-NO(x) reactions. , 2003, Ultrasonics sonochemistry.

[16]  A. Dalai,et al.  Comparison of Hydrodenitrogenation of Model Basic and Nonbasic Nitrogen Species in a Trickle Bed Reactor Using Commercial NiMo/Al2O3 Catalyst , 2003 .

[17]  K. Suslick,et al.  Sonochemical preparation of supported hydrodesulfurization catalysts. , 2001, Journal of the American Chemical Society.

[18]  F. O. Rice.  THE THERMAL DECOMPOSITION OF ORGANIC COMPOUNDS FROM THE STANDPOINT OF FREE RADICALS. I. SATURATED HYDROCARBONS , 1931 .

[19]  K. Suslick,et al.  The sonochemical hot spot , 1987 .

[20]  T. Yen,et al.  An upgrading process through cavitation and surfactant , 1993 .

[21]  P. K. Sinha,et al.  Ultrasonic treatment of liquid waste containing EDTA , 2004 .