Steam generator structure: Continuous model and constructal design

This study shows that the main features of a steam generator can be determined based on the method of constructal design. The generator is endowed with freedom to morph, and then is optimized by putting the right components in the right places. The number of steam tubes is sufficiently large, so that the steam generator may be modeled as continuous. The total volume of the assembly and the volume of the steam tubes are fixed. The geometry is free to vary in the search for maximum heat transfer density. The steam flow in the tubes is modeled in two ways: single-phase and two-phase fully developed turbulent flow. Results of the analysis are: the location of the flow reversal (i.e. the demarcation between the tubes of the downcomer and those of the riser), the optimal spacing between adjacent tubes, and the number of tubes for the downcomer and the riser. Copyright © 2010 John Wiley & Sons, Ltd.

[1]  MAXIMUM HEAT TRANSFER RATE DENSITY IN TWO-DIMENSIONAL MINICHANNELS AND MICROCHANNELS , 2004 .

[2]  Y. Muzychka.  Constructal design of forced convection cooled microchannel heat sinks and heat exchangers , 2005 .

[3]  D. Pence,et al.  REDUCED PUMPING POWER AND WALL TEMPERATURE IN MICROCHANNEL HEAT SINKS WITH FRACTAL-LIKE BRANCHING CHANNEL NETWORKS , 2003 .

[4]  G. H. Babcock,et al.  Steam / its generation and use , 1972 .

[5]  P. Cheng,et al.  Heat transfer and pressure drop in fractal tree-like microchannel nets , 2002 .

[6]  D. Poulikakos,et al.  Laminar mixing, heat transfer and pressure drop in tree-like microchannel nets and their application for thermal management in polymer electrolyte fuel cells , 2004 .

[7]  Farrokh Mistree,et al.  Platform Design for Customizable Products as a Problem of Access in a Geometric Space , 2003 .

[8]  C. Elphick,et al.  Constructal Theory: From Engineering to Physics, and How Flow Systems Develop Shape and , 2006 .

[9]  S. Bhattacharjee,et al.  The formation of a wall jet near a high temperature wall under microgravity environment , 1988 .

[10]  Adrian Bejan,et al.  Design with constructal theory , 2008 .

[11]  A. Bejan,et al.  Constructal theory of generation of configuration in nature and engineering , 2006 .

[12]  J. Gruss,et al.  Constructal Networks for Efficient Cooling/Heating , 2004 .

[13]  Dimos Poulikakos,et al.  Tree network channels as fluid distributors constructing double-staircase polymer electrolyte fuel cells , 2004 .

[14]  P. K. Nag,et al.  Performance simulation of heat recovery steam generators in a cogeneration system , 1998 .

[15]  Tanmay Basak,et al.  Thermal performance of a multi-block heat exchanger designed on the basis of Bejan’s constructal theory , 2008 .

[16]  A. Bejan.  Shape and Structure, from Engineering to Nature , 2000 .

[17]  Sang Yong Lee,et al.  Optimization of heat recovery steam generator through exergy analysis for combined cycle gas turbine power plants , 2008 .

[18]  Y. Muzychka.  Constructal multi-scale design of compact micro-tube heat sinks and heat exchangers , 2007 .

[19]  J. Thom,et al.  Prediction of pressure drop during forced circulation boiling of water , 1964 .

[20]  S. Petrescu.  COMMENTS ON : THE OPTIMAL SPACING OF PARALLEL PLATES COOLED BY FORCED CONVECTION , 1994 .

[21]  Antonio Rovira,et al.  Influence of the heat recovery steam generator design parameters on the thermoeconomic performances of combined cycle gas turbine power plants , 2004 .

[22]  Adrian Bejan,et al.  Constructal steam generator architecture , 2009 .

[23]  A. H. Reis,et al.  Constructal theory of flow architecture of the lungs. , 2004, Medical physics.

[24]  Arun S. Mujumdar,et al.  Numerical Analysis of Blockage and Optimization of Heat Transfer Performance of Fractal-like Microchannel Nets , 2006 .