Distributed Strain Behavior of a Reinforced Concrete Bridge: Case Study

To effectively assess and manage aging infrastructure, sensing technologies that produce accurate and useful quantitative data are required. Distributed fiber optic strain measurement systems are one potential technology that could fulfill this requirement. This case study investigates the performance of a distributed fiber optic strain measurement technology with high accuracy and spatial resolution during a load test on a RC bridge. The measurements from the fiber optic system are compared with conventional strain gauges and linear transducers, and good agreement between the sensors was found. The fiber optic measurements are also used to examine the bridge support conditions as well as the load distribution between beams. The results show that assumptions made about the support conditions during design do not match the actual bridge behavior, although the load distribution between beams is as expected.

[1]  F. Vecchio,et al.  THE MODIFIED COMPRESSION FIELD THEORY FOR REINFORCED CONCRETE ELEMENTS SUBJECTED TO SHEAR , 1986 .

[2]  Stephen T. Kreger,et al.  High-resolution extended distance distributed fiber-optic sensing using Rayleigh backscatter , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[3]  Pj Bennett,et al.  Optical fibre strain measurement for tunnel lining monitoring , 2010 .

[4]  Assaf Klar,et al.  Feasibility study of automated detection of tunnel excavation by Brillouin optical time domain reflectometry , 2010 .

[5]  Benjamin A. Graybeal,et al.  Visual Inspection of Highway Bridges , 2002 .

[6]  Pj Bennett,et al.  Performance Monitoring of a Secant-Piled Wall Using Distributed Fiber Optic Strain Sensing , 2011 .

[7]  Changsen Sun,et al.  Quantitative investigation in distributed sensing of structural defects with Brillouin optical time domain reflectometry , 2013 .

[8]  Stephen T. Kreger,et al.  Strain measurements of a fiber loop rosette using high spatial resolution Rayleigh scatter distributed sensing , 2010, European Workshop on Optical Fibre Sensors.

[9]  Romeo Bernini,et al.  Long term structural health monitoring by Brillouin fibre-optic sensing: a real case , 2012 .

[10]  J. Casas,et al.  Application of optical fiber distributed sensing to health monitoring of concrete structures , 2013 .

[11]  Pj Bennett,et al.  Distributed strain measurement for pile foundations , 2006 .

[12]  Fabio Matta,et al.  Distributed Strain Measurement in Steel Bridge with Fiber Optic Sensors: Validation through Diagnostic Load Test , 2008 .

[13]  Brahim Benmokrane,et al.  Structural health monitoring of innovative bridges in Canada with fiber optic sensors , 2001 .

[14]  Benjamin Berwick,et al.  Calibrating the steel-members fatigue limit states of the AASHTO LRFD bridge design specifications , 2012 .

[15]  R. Measures,et al.  Fiber-optic Bragg grating sensors for bridge monitoring , 1997 .

[16]  Ryan Regier.  APPLICATION OF FIBRE OPTICS ON REINFORCED CONCRETE STRUCTURES TO DEVELOP A STRUCTURAL HEALTH MONITORING TECHNIQUE , 2013 .

[17]  K.T.V. Grattan,et al.  A field deployable, multiplexed Bragg grating sensor system used in an extensive highway bridge monitoring evaluation tests , 2005, IEEE Sensors Journal.