Friction stir lap welding of AA6061 aluminium alloy with a graphene interlayer

ABSTRACT The present study aims to enhance the strength of friction stir lap welded aluminum alloys by using an interlayer of graphene nanoplatelets (GNPs) at the weld interface. With GNP interlayer, the weld strength and percentage elongation increased by 121 and 53%, respectively, as compared to the weld without GNP interlayer. The interlayer also changes the mode of fracture from brittle in the weld without GNP to ductile mode. Grain size in the weld with interlayer decreased by ~38% as equated to the weld without GNP. The height of the hook defect (HD) and cold lap defect (CLD) decreased by 26% and 41%, respectively, in the weld with GNP interlayer as compared to the weld without interlayer. In weld with interlayer, the bottom of the top plate on the retreating side acts as the potential site for fracture due to the presence of an interfacial defect, and undeformed GNP layer. The strengthening of the weld is attributed to various primary strengthening mechanisms like thermal mismatch, grain refinement, Orowan looping, and load transfer. Moreover, GNP interlayer also prevents the formation of the Al2O3 layer at the lap interface and thus contribute significantly in the weld strengthening.

[1]  H. Asgharzadeh,et al.  Aluminum Matrix Composites Reinforced with Graphene: A Review on Production, Microstructure, and Properties , 2020, Critical Reviews in Solid State and Materials Sciences.

[2]  Abhishek Sharma,et al.  Fabrication of bulk aluminum-graphene nanocomposite through friction stir alloying , 2020, Journal of Composite Materials.

[3]  R. P. Mahto,et al.  Surface alteration of aluminium alloy by an exfoliated graphitic tribolayer during friction surfacing using a consumable graphite rich tool , 2019, Surface Topography: Metrology and Properties.

[4]  Abhishek Sharma,et al.  Effect of exfoliated few-layered graphene on corrosion and mechanical behaviour of the graphitized Al–SiC surface composite fabricated by FSP , 2019, Bulletin of Materials Science.

[5]  B. Sahoo,et al.  Tribological characteristics of aluminium-CNT/graphene/graphite surface nanocomposites: a comparative study , 2019, Surface Topography: Metrology and Properties.

[6]  Abhishek Sharma,et al.  Surface modification of Al6061-SiC surface composite through impregnation of graphene, graphite & carbon nanotubes via FSP: A tribological study , 2019, Surface and Coatings Technology.

[7]  R. German,et al.  A review of processing techniques for graphene-reinforced metal matrix composites , 2019, Materials and Manufacturing Processes.

[8]  Praveen Kumar,et al.  Effect of graphene interlayer on resistance spot welded AISI-1008 steel joints , 2019, Materials Research Express.

[9]  A. S. Deshpande,et al.  Particulate metal matrix composites and their fabrication via friction stir processing – a review , 2019, Materials and Manufacturing Processes.

[10]  B. Sahoo,et al.  Surface mechanical and self-lubricating properties of MWCNT impregnated aluminium surfaces , 2019, Surface Engineering.

[11]  Surjya K. Pal,et al.  Effect of multiple micro channel reinforcement filling strategy on Al6061-graphene nanocomposite fabricated through friction stir processing , 2019, Journal of Manufacturing Processes.

[12]  Xiangchen Meng,et al.  AZ31B/7075-T6 alloys friction stir lap welding with a zinc interlayer , 2019, Journal of Materials Processing Technology.

[13]  N. Ghetiya,et al.  Joining of metal matrix composites using friction stir welding: a review , 2018, Materials and Manufacturing Processes.

[14]  J. Paul,et al.  Tribological Behavior of Solid-State Processed Al-1100/GNP Surface Nanocomposites , 2018, Journal of Materials Engineering and Performance.

[15]  A. Shamsipur,et al.  Improvement of microstructure and corrosion properties of friction stir welded AA5754 by adding Zn interlayer , 2018, International Journal of Minerals, Metallurgy, and Materials.

[16]  B. Sahoo,et al.  Influence of process parameters and temperature on the solid state fabrication of multilayered graphene-aluminium surface nanocomposites , 2018, Journal of Manufacturing Processes.

[17]  H. Omidvar,et al.  The effect of changing chemical composition on dissimilar Mg/Al friction stir welded butt joints using zinc interlayer , 2018, Journal of Manufacturing Processes.

[18]  Abhishek Sharma,et al.  Particle size and shape effects on the surface mechanical properties of aluminium coated with carbonaceous materials , 2018, Journal of Composite Materials.

[19]  Abhishek Sharma,et al.  Study of Nano-Mechanical, Electrochemical and Raman Spectroscopic Behavior of Al6061-SiC-Graphite Hybrid Surface Composite Fabricated through Friction Stir Processing , 2018 .

[20]  Surjya K. Pal,et al.  Friction stir processing of Al6061-SiC-graphite hybrid surface composites , 2018 .

[21]  Abhishek Kumar,et al.  Strategical parametric investigation on manufacturing of Al–Mg–Zn–Cu alloy surface composites using FSP , 2018 .

[22]  Surjya K. Pal,et al.  Surface modification of Al6061 by graphene impregnation through a powder metallurgy assisted friction surfacing , 2018 .

[23]  D. Mahapatra,et al.  Multi-layer graphene reinforced aluminum –manufacturing of high strength composite by friction stir alloying , 2018 .

[24]  V. Badheka,et al.  Process parameters/material location affecting hooking in friction stir lap welding: Dissimilar aluminum alloys , 2018 .

[25]  A. Gerlich,et al.  Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing , 2018 .

[26]  Julio Blanco Fernández,et al.  Tribological Behavior of AA1050H24-Graphene Nanocomposite Obtained by Friction Stir Processing , 2018 .

[27]  M. Anthony Xavior,et al.  Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites , 2018 .

[28]  M. A. Xavior,et al.  Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites , 2018 .

[29]  L. Fratini,et al.  Enhancement of mechanical properties of FSWed AA7075 lap joints through in-situ fabrication of MMC , 2017 .

[30]  Abhishek Sharma,et al.  Surface modification of aluminium by graphene impregnation , 2017 .

[31]  Ravi Kumar,et al.  Preparation of aluminium 6063-graphite surface composites by an electrical resistance heat assisted pressing technique , 2017 .

[32]  W. Zhiguo,et al.  The effect of interface defect on mechanical properties and its formation mechanism in friction stir lap welded joints of aluminum alloys , 2016 .

[33]  J. Ramkumar,et al.  Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy , 2016 .

[34]  S. Natarajan,et al.  Strengthening Mechanisms in Multiwalled Carbon Nanotubes Reinforced Co–W Pulse Electrodeposited Coatings , 2016 .

[35]  M. Bahrami,et al.  Microstructure evolutions and mechanical properties of nano-SiC-fortified AA7075 friction stir weldment: The role of second pass processing , 2015 .

[36]  Mohsen Bahrami,et al.  Microstructural and mechanical behaviors of nano-SiC-reinforced AA7075-O FSW joints prepared through two passes , 2015 .

[37]  E. Ahmadi,et al.  Improved microstructure and mechanical properties in gas tungsten arc welded aluminum joints by using graphene nanosheets/aluminum composite filler wires. , 2014, Micron.

[38]  M. Bahrami,et al.  Studying microstructure and mechanical properties of SiC-incorporated AZ31 joints fabricated through FSW: the effects of rotational and traveling speeds , 2014 .

[39]  S. Hur,et al.  Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processing , 2014 .

[40]  M. Bahrami,et al.  Exploring the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded 7075 aluminum alloy: Fatigue life, impact energy, tensile strength , 2014 .

[41]  M. Bahrami,et al.  A novel approach to develop aluminum matrix nano-composite employing friction stir welding technique , 2014 .

[42]  El-Sayed M. Sherif,et al.  Fabrication of exfoliated graphite nanoplatelets-reinforced aluminum composites and evaluating their mechanical properties and corrosion behavior , 2011 .

[43]  Yufeng Sun,et al.  The effect of SiC particles on the microstructure and mechanical properties of friction stir welded pure copper joints , 2011 .

[44]  T. Prater.  Solid-State Joining of Metal Matrix Composites: A Survey of Challenges and Potential Solutions , 2011 .

[45]  T. S. Srivatsan,et al.  An Investigation of Friction During Friction Stir Welding of Metallic Materials , 2009 .

[46]  T. Pal.  Joining of Aluminium Metal Matrix Composites , 2005 .