Basic Dental Implantology Using the Straumann System
暂无分享,去创建一个
[1] D Buser,et al. Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs. , 1991, Journal of biomedical materials research.
[2] S. Ivanovski,et al. Titanium surface hydrophilicity enhances platelet activation. , 2014, Dental materials journal.
[3] H. Larjava,et al. Retrospective cohort study of 4591 Straumann implants in private practice setting, with up to 10-year follow-up. Part 1: multivariate survival analysis. , 2015, Clinical oral implants research.
[4] A. Wennerberg,et al. A histomorphometric evaluation of screw-shaped implants each prepared with two surface roughnesses. , 1998, Clinical oral implants research.
[5] Sun-Young Lee,et al. The effect of the thread depth on the mechanical properties of the dental implant , 2015, The journal of advanced prosthodontics.
[6] Hans-Joachim Wilke,et al. The influence of various titanium surfaces on the interface shear strength between implants and bone , 1991 .
[7] K. Nelson,et al. The Influence of Torque Tightening on the Position Stability of the Abutment in Conical Implant-Abutment Connections. , 2015, The International journal of prosthodontics.
[8] E. Schulten,et al. 10-year survival rate and the incidence of peri-implant disease of 374 titanium dental implants with a SLA surface: a prospective cohort study in 177 fully and partially edentulous patients. , 2015, Clinical oral implants research.
[9] U. Belser,et al. Mechanics of the implant-abutment connection: an 8-degree taper compared to a butt joint connection. , 2000, The International journal of oral & maxillofacial implants.
[10] M. Dard,et al. Evaluation of a new titanium-zirconium dental implant: a biomechanical and histological comparative study in the mini pig. , 2012, Clinical implant dentistry and related research.
[11] A. Greenberg. Digital technologies for dental implant treatment planning and guided surgery. , 2015, Oral and maxillofacial surgery clinics of North America.
[12] D. Buser,et al. Bone apposition to a titanium-zirconium alloy implant, as compared to two other titanium-containing implants. , 2012, European cells & materials.
[13] D Buser,et al. What is This? Downloaded from jdr.sagepub.com at PENNSYLVANIA STATE UNIV on February 23, 2013 For personal use only. No other uses without permission. International and American Associations for Dental ResearchRESEARCH REPORTS , 2004 .
[14] S. Zabler,et al. An in vitro pilot study of abutment stability during loading in new and fatigue-loaded conical dental implants using synchrotron-based radiography. , 2013, The International journal of oral & maxillofacial implants.
[15] T. Albrektsson,et al. Effects of titanium surface topography on bone integration: a systematic review. , 2009, Clinical oral implants research.
[16] P. Psyllaki,et al. Observations on an in-vivo failure of a titanium dental implant/abutment screw system: a case report. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[17] M. Cristalli,et al. Horizontal and Vertical Ridge Augmentation in Localized Alveolar Deficient Sites: A Retrospective Case Series , 2012, Implant dentistry.
[18] D Buser,et al. Long-term evaluation of non-submerged ITI implants. Part 1: 8-year life table analysis of a prospective multi-center study with 2359 implants. , 1997, Clinical oral implants research.
[19] M. Chiapasco,et al. Implants in reconstructed bone: a comparative study on the outcome of Straumann® tissue level and bone level implants placed in vertically deficient alveolar ridges treated by means of autogenous onlay bone grafts. , 2014, Clinical implant dentistry and related research.
[20] Y. Liu,et al. Surface characteristics and cell adhesion: a comparative study of four commercial dental implants. , 2013, Journal of prosthodontics : official journal of the American College of Prosthodontists.
[21] Marco Ghisolfi,et al. Long-term survival and success of oral implants in the treatment of full and partial arches: a 7-year prospective study with the ITI dental implant system. , 2004, The International journal of oral & maxillofacial implants.
[22] D Buser,et al. Bone response to unloaded and loaded titanium implants with a sandblasted and acid-etched surface: a histometric study in the canine mandible. , 1998, Journal of biomedical materials research.
[23] K. Nelson,et al. Theoretical Considerations: Implant Positional Index Design , 2009, Journal of dental research.
[24] S. Zabler,et al. Fatigue induced changes in conical implant-abutment connections. , 2015, Dental materials : official publication of the Academy of Dental Materials.
[25] Erwin Keeve,et al. Computer-aided manufacturing technologies for guided implant placement , 2010, Expert review of medical devices.
[26] M. Quirynen,et al. Small-diameter titanium grade IV and titanium-zirconium implants in edentulous mandibles: five-year results from a double-blind, randomized controlled trial , 2015, BMC Oral Health.
[27] Tiago Borges,et al. Clinical Outcome of Inter-Proximal Papilla between a Tooth and a Single Implant Treated with CAD/CAM Abutments: a Cross-Sectional Study , 2012, Journal of oral & maxillofacial research.
[28] A. Filippi,et al. A prospective noninterventional study to document implant success and survival of the Straumann Bone Level SLActive dental implant in daily dental practice. , 2013, Quintessence international.
[29] L. Chambrone,et al. Efficacy of standard (SLA) and modified sandblasted and acid-etched (SLActive) dental implants in promoting immediate and/or early occlusal loading protocols: a systematic review of prospective studies. , 2015, Clinical oral implants research.
[30] E. Piehslinger,et al. Status of teeth adjacent to single-tooth implants. , 2003, The International journal of prosthodontics.
[31] S. Zabler,et al. In situ microradioscopy and microtomography of fatigue-loaded dental two-piece implants , 2015, Journal of synchrotron radiation.
[32] F. Sutter,et al. Engineering and design aspects of the I.T.I. hollow-basket implants. , 1983, The Journal of oral implantology.
[33] John D. Jones,et al. Prosthetic management of implants in the esthetic zone. , 2004, The International journal of oral & maxillofacial implants.
[34] R. Miron,et al. Health, Maintenance, and Recovery of Soft Tissues around Implants. , 2016, Clinical implant dentistry and related research.
[35] H. Terheyden,et al. Bone augmentation procedures in localized defects in the alveolar ridge: clinical results with different bone grafts and bone-substitute materials. , 2009, The International journal of oral & maxillofacial implants.
[36] E. Romeo,et al. Implant-supported fixed cantilever prosthesis in partially edentulous jaws: a cohort prospective study. , 2009, Clinical oral implants research.
[37] G. Huynh-Ba,et al. Early osseointegration to hydrophilic and hydrophobic implant surfaces in humans. , 2011, Clinical oral implants research.
[38] S. Zabler,et al. Fatigue induced deformation of taper connections in dental titanium implants , 2012 .
[39] G. Polizzi,et al. Immediate and delayed implant placement into extraction sockets: a 5-year report. , 2000, Clinical implant dentistry and related research.
[40] D. Buser,et al. The new concept of ITI hollow-cylinder and hollow-screw implants: Part 1. Engineering and design. , 1988, The International journal of oral & maxillofacial implants.
[41] G. Romanos,et al. In vitro assessment of primary stability of Straumann® implant designs. , 2014, Clinical implant dentistry and related research.
[42] B. Merz,et al. The development of the ITI DENTAL IMPLANT SYSTEM. Part 2: 1998-2000: Steps into the next millennium. , 2000, Clinical oral implants research.
[43] R. Mericske-Stern,et al. Effectiveness of maxillary overdentures supported by implants: maintenance and prosthetic complications. , 2001, The International journal of prosthodontics.
[44] Wim Teughels,et al. The accuracy of guided surgery via mucosa-supported stereolithographic surgical templates in the hands of surgeons with little experience. , 2015, Clinical oral implants research.
[45] B. Al-Nawas,et al. A Prospective Noninterventional Study to Evaluate Survival and Success of Reduced Diameter Implants Made From Titanium-Zirconium Alloy. , 2015, The Journal of oral implantology.
[46] Rainer Schmelzeisen,et al. Three-dimensional plotting and printing of an implant drilling guide: simplifying guided implant surgery. , 2013, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[47] R. Woody,et al. Evaluation of the ITI Morse taper implant/abutment design with an internal modification. , 2003, The International journal of oral & maxillofacial implants.
[48] P. Cury,et al. Effect of the vertical and horizontal distances between adjacent implants and between a tooth and an implant on the incidence of interproximal papilla. , 2004, Journal of periodontology.
[49] K. Nelson,et al. Impact of abutment rotation and angulation on marginal fit: theoretical considerations. , 2010, The International journal of oral & maxillofacial implants.
[50] A. Filippi,et al. Long-term evaluation of submerged and nonsubmerged ITI solid-screw titanium implants: a 10-year life table analysis of 468 implants. , 2003, The International journal of oral & maxillofacial implants.
[51] M. Dard,et al. Histological and immunohistochemical analysis of initial and early osseous integration at chemically modified and conventional SLA titanium implants: preliminary results of a pilot study in dogs. , 2007, Clinical oral implants research.
[52] L. Jordan,et al. Axial displacement of abutments into implants and implant replicas, with the tapered cone-screw internal connection, as a function of tightening torque. , 2009, The International journal of oral & maxillofacial implants.
[53] Kyeongsoon Park,et al. Cell Adhesion and in Vivo Osseointegration of Sandblasted/Acid Etched/Anodized Dental Implants , 2015, International journal of molecular sciences.
[54] Urs C Belser,et al. Biologic width around different implant-abutment interface configurations. A radiographic evaluation of the effect of horizontal offset and concave abutment profile in the canine mandible. , 2014, The International journal of oral & maxillofacial implants.
[55] Ilser Turkyilmaz,et al. Accuracy of three different types of stereolithographic surgical guide in implant placement: an in vitro study. , 2012, The Journal of prosthetic dentistry.
[56] E. Baltacıoğlu,et al. Implantology Peri-implant plastic surgical approaches to increasing keratinised mucosa width : Which to use and when ? , 2014 .
[57] A. Greenberg,et al. Clinical Cone Beam CT and CT-Guided Dental Implant Surgery , 2018 .
[58] E. Romeo,et al. A double-blind randomized controlled trial (RCT) of Titanium-13Zirconium versus Titanium Grade IV small-diameter bone level implants in edentulous mandibles--results from a 1-year observation period. , 2012, Clinical implant dentistry and related research.
[59] R. Gruber,et al. Early bone apposition to hydrophilic and hydrophobic titanium implant surfaces: a histologic and histomorphometric study in minipigs. , 2014, Clinical oral implants research.
[60] N. Spencer,et al. The role of nanostructures and hydrophilicity in osseointegration: In-vitro protein-adsorption and blood-interaction studies. , 2015, Journal of biomedical materials research. Part A.
[61] Anthony G Sclar,et al. Guidelines for flapless surgery. , 2007, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[62] Michel Dard,et al. Nanostructures and hydrophilicity influence osseointegration: a biomechanical study in the rabbit tibia. , 2014, Clinical oral implants research.
[63] D. Dolanmaz,et al. Monitoring bone morphogenetic protein-2 and -7, soluble receptor activator of nuclear factor-κB ligand and osteoprotegerin levels in the peri-implant sulcular fluid during the osseointegration of hydrophilic-modified sandblasted acid-etched and sandblasted acid-etched surface dental implants. , 2015, Journal of periodontal research.
[64] J Lindström,et al. Intra-osseous anchorage of dental prostheses. I. Experimental studies. , 1969, Scandinavian journal of plastic and reconstructive surgery.
[65] M. Scacchi,et al. The development of the ITI DENTAL IMPLANT SYSTEM. Part 1: A review of the literature. , 2000, Clinical oral implants research.
[66] I. Naert,et al. Dental Implant Macro-Design Features Can Impact the Dynamics of Osseointegration. , 2015, Clinical implant dentistry and related research.
[67] A. Vissink,et al. Recommendations for implant‐retained nasal prostheses after ablative tumor surgery: Minimal surgical aftercare, high implant survival, and satisfied patients , 2016, Head & neck.
[68] D. Cochran,et al. Tissue integration of a new titanium-zirconium dental implant: a comparative histologic and radiographic study in the canine. , 2011, Journal of periodontology.
[69] A. Wennerberg,et al. A retrospective analysis of early and delayed loading of full-arch mandibular prostheses using three different implant systems: clinical results with up to 5 years of loading. , 2009, Clinical implant dentistry and related research.
[70] R. Schmelzeisen,et al. Is the presence of keratinized mucosa associated with periimplant tissue health? A clinical cross-sectional analysis , 2015, International Journal of Implant Dentistry.
[71] Ersilia Barbato,et al. Accuracy of two stereolithographic surgical templates: a retrospective study. , 2013, Clinical implant dentistry and related research.
[72] D. Cochran,et al. The scientific basis for and clinical experiences with Straumann implants including the ITI Dental Implant System: a consensus report. , 2000, Clinical oral implants research.
[73] Omid Savabi,et al. Retention of implant-supported overdenture with bar/clip and stud attachment designs. , 2013, The Journal of oral implantology.
[74] P. Fugazzotto. Simplified Technique for Immediate Implant Insertion into Extraction Sockets: Report of Technique and Preliminary Results , 2002, Implant dentistry.
[75] K. Nelson,et al. Analytical and experimental position stability of the abutment in different dental implant systems with a conical implant–abutment connection , 2012, Clinical Oral Investigations.
[76] A. Greenberg. Cone beam computed tomography scanning and diagnosis for dental implants. , 2015, Oral and maxillofacial surgery clinics of North America.
[77] P. Layrolle,et al. Surface treatments of titanium dental implants for rapid osseointegration. , 2007, Dental materials : official publication of the Academy of Dental Materials.
[78] Babbush Ca. ITI endosteal hollow cylinder implant systems. , 1986 .
[79] Zhi-Yong Zhang,et al. Early loading of ITI implants supporting maxillary fixed full-arch prostheses. , 2008, Clinical oral implants research.
[80] L. Sennerby,et al. An experimental comparison of two different clinically used implant designs and surfaces. , 2012, Clinical implant dentistry and related research.
[81] S. Müftü,et al. Efficiency considerations for the purely tapered interference fit (TIF) abutments used in dental implants. , 2004, Journal of biomechanical engineering.
[82] V. Muglia,et al. Influence of interimplant distance on papilla formation and bone resorption: a clinical-radiographic study in dogs. , 2006, The Journal of oral implantology.
[83] N. Ferrigno,et al. A long-term follow-up study of non-submerged ITI implants in the treatment of totally edentulous jaws. Part I: Ten-year life table analysis of a prospective multicenter study with 1286 implants. , 2002, Clinical oral implants research.
[84] Junyu Shi,et al. Evaluation of the clinical and aesthetic outcomes of Straumann(®) Standard Plus implants supported single crowns placed in non-augmented healed sites in the anterior maxilla: a 5-8 years retrospective study. , 2016, Clinical oral implants research.
[85] T. Albrektsson. Direct bone anchorage of dental implants. , 1983, The Journal of prosthetic dentistry.
[86] A. Rack,et al. In vitro synchrotron-based radiography of micro-gap formation at the implant–abutment interface of two-piece dental implants , 2010, Journal of synchrotron radiation.
[87] Ergin Tönük,et al. Accuracy of a manual torque application device for morse-taper implants: a technical note. , 2004, The International journal of oral & maxillofacial implants.
[88] R. Listrom,et al. Three-year outcomes of Straumann Bone Level SLActive dental implants in daily dental practice: a prospective non-interventional study. , 2015, Quintessence international.
[89] Gary L. Stafford. Review found little difference between sandblasted and acid-etched (SLA) dental implants and modified surface (SLActive) implants , 2014, Evidence-Based Dentistry.
[90] F. Zarone,et al. Prosthetic treatment of maxillary lateral incisor agenesis with osseointegrated implants: a 24-39-month prospective clinical study. , 2006, Clinical oral implants research.
[91] D. Cochran,et al. Biologic width adjacent to loaded implants with machined and rough collars in the dog. , 2014, The International journal of periodontics & restorative dentistry.
[92] Regina Mericske-Stern,et al. Prosthetically driven, computer-guided implant planning for the edentulous maxilla: a model study. , 2009, Clinical implant dentistry and related research.
[93] F. Schwarz,et al. Effects of surface hydrophilicity and microtopography on early stages of soft and hard tissue integration at non-submerged titanium implants: an immunohistochemical study in dogs. , 2007, The Journal of Periodontology.
[94] O. Jensen. Dental extraction, immediate placement of dental implants, and immediate function. , 2015, Oral and maxillofacial surgery clinics of North America.
[95] C. Evans,et al. Evaluation of the fit of CAD/CAM abutments. , 2013, The International journal of prosthodontics.
[96] N. Gellrich,et al. Non-radiological method for three-dimensional implant position evaluation using an intraoral scan method. , 2014, Clinical oral implants research.
[97] A. Piattelli,et al. Experimental evaluation in rabbits of the effects of thread concavities in bone formation with different titanium implant surfaces. , 2014, Clinical implant dentistry and related research.
[98] N P Lang,et al. The new concept of ITI hollow-cylinder and hollow-screw implants: Part 2. Clinical aspects, indications, and early clinical results. , 1988, The International journal of oral & maxillofacial implants.
[99] T. Attin,et al. Comparison of SLA® or SLActive® implants placed in the maxillary sinus with or without synthetic bone graft materials--an animal study in sheep. , 2014, Clinical oral implants research.