COMBINING TAGUCHI METHOD, PRINCIPAL COMPONENT ANALYSIS AND FUZZY LOGIC TO THE TOLERANCE DESIGN OF A DUAL-PURPOSE SIX-BAR MECHANISM

A hybrid approach of combining Taguchi method, principal component analysis and fuzzy logic for the tolerance design of a dual-purpose six-bar mechanism is proposed. The approach is to firstly use the Taguchi orthogonal array to carry out experiments for calculating the S/N ratios of the positional errors to the angular error of the dual-purpose six-bar mechanism. The principal component analysis is then applied to determine the principal components of the S/N ratios, which are transformed via fuzzy logic reasoning into a multiple performance index (MPI) for further analysis of the effect of each control factors on the quality of the mechanism. Through the analysis of response table and diagram, key dimensional tolerances can be classified, which allows the decision of either to tighten the key tolerances to improve mechanism quality or to relax the tolerance of non-key dimensions to reduce manufacturing costs to be made.

[1]  Arthur G. Erdman,et al.  A generalized performance sensitivity synthesis methodology for four-bar mechanisms , 1992 .

[2]  Sanjay G. Dhande,et al.  Mechanical Error Analysis of Spatial Linkages , 1978 .

[3]  Arthur G. Erdman,et al.  Sensitivity distribution in the synthesis solution space of four-bar linkages , 1988 .

[4]  Fouad Bennis,et al.  Tolerance synthesis of mechanisms: A robust design approach , 2003, DAC 2003.

[5]  R. E. Garrett,et al.  Effect of Tolerance and Clearance in Linkage Design , 1969 .

[6]  Guo Sheng,et al.  The DOF Degeneration Characteristics of Closed Loop Over-Constrained Mechanisms. Transactions of the Canadian Society for Mechanical Engineering , 2012 .

[7]  Sanjay G. Dhande,et al.  Analysis and Synthesis of Mechanical Error in Linkages—A Stochastic Approach , 1973 .

[8]  Richard A. Johnson,et al.  Applied Multivariate Statistical Analysis , 1983 .

[9]  G. H. Sutherland,et al.  Mechanism Design: Accounting for Manufacturing Tolerances and Costs in Function Generating Problems , 1975 .

[10]  Jianmin Zhu,et al.  Performance Distribution Analysis and Robust Design , 2001 .

[11]  Kwun-Lon Ting,et al.  Performance Quality and Tolerance Sensitivity of Mechanisms , 1996 .

[12]  Ferdinand Freudenstein,et al.  Kinematic Synthesis of Linkages , 1965 .

[13]  T. R. Bement,et al.  Taguchi techniques for quality engineering , 1995 .

[14]  Elsayed A. Elsayed,et al.  Optimal levels of process parameters for products with multiple characteristics , 1993 .

[15]  Sanjay G. Dhande,et al.  Analysis and synthesis of mechanical error in path-generating linkages using a stochastic approach , 1987 .

[16]  Sridhar Kota,et al.  Use of orthogonal arrays in mechanism synthesis , 1993 .

[17]  S. J. Lee,et al.  The Determination of the Probabilistic Properties of Velocities and Accelerations in Kinematic Chains With Uncertainty , 1991 .

[18]  R. Krishna Kumar,et al.  Simultaneous optimization of flame spraying process parameters for high quality molybdenum coatings using Taguchi methods , 1996 .

[19]  T. Ross.  Fuzzy Logic with Engineering Applications , 1994 .

[20]  Fu-Chen Chen,et al.  Multi-objective optimisation of high-speed electrical discharge machining process using a Taguchi fuzzy-based approach , 2007 .

[21]  J. Chakraborty,et al.  Synthesis of mechanical error in linkages , 1975 .

[22]  F-C Chen,et al.  Taguchi-fuzzy-based approach for the sensitivity analysis of a four-bar function generator , 2006 .