Columnar to equiaxed transition during direct metal laser sintering of AlSi10Mg alloy: Effect of building direction

Abstract In the current study, cylindrical samples of AlSi10Mg alloy were fabricated using direct metal laser sintering (DMLS) technique in vertical and horizontal directions. The microstructure of the samples was analyzed using scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy. It was observed that, by changing the building direction from vertical to horizontal, columnar to equiaxed transition (CET) occurred in the alloy. While 75% of the grains in the vertical sample were columnar, by changing the direction to horizontal, 49% of the grains evolved with columnar shape and 51% of them were equiaxed. Moreover, the texture of DMLS-AlSi10Mg alloy changed due to CET. While {001} fiber texture evolved in the vertical sample, the direction tilted away from the building direction in the horizontal one. Using the fundamentals of solidification and constitutional undercooling, the solidification behavior of AlSi10Mg alloy during DMLS process was modeled. It was observed that, the determinant parameter in CET during DMLS of AlSi10Mg alloy is the angle between the nominal growth rate and h k l > direction of the growing dendrite, which is controlled by the geometry and building direction of the sample. Further TEM studies confirmed that, CET alters the shape and coherency of Si precipitates and dislocation density inside the α-Al dendrites in DMLS-AlSi10Mg alloy.

[1]  Johan Moverare,et al.  Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments , 2017 .

[2]  J. Shen,et al.  Strength and strain hardening of a selective laser melted AlSi10Mg alloy , 2017 .

[3]  H. Asgari,et al.  Achieving low surface roughness AlSi10Mg_200C parts using direct metal laser sintering , 2018 .

[4]  H. Asgari,et al.  On dynamic mechanical behavior of additively manufactured AlSi10Mg_200C , 2018 .

[5]  Ian A. Ashcroft,et al.  Metallurgy of high-silicon steel parts produced using selective laser melting , 2016 .

[6]  Wilfried Kurz,et al.  Epitaxial laser metal forming: analysis of microstructure formation , 1999 .

[7]  T. Pollock,et al.  3D printing of high-strength aluminium alloys , 2017, Nature.

[8]  N. Takata,et al.  Size dependence of microstructure of AlSi10Mg alloy fabricated by selective laser melting , 2017, Materials Characterization.

[9]  C. Emmelmann,et al.  Additive Manufacturing of Metals , 2016 .

[10]  J. Kruth,et al.  Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum , 2013 .

[11]  D. Gu,et al.  Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder , 2014 .

[12]  Ryan R. Dehoff,et al.  Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718 , 2015 .

[13]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[14]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[15]  Yanyan Zhu,et al.  The anisotropy of laser melting deposition additive manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy , 2015 .

[16]  A. Spierings,et al.  SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment , 2017 .

[17]  Lai‐Chang Zhang,et al.  Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg , 2018 .

[18]  M. Martorano,et al.  Predicting the columnar-to-equiaxed transition for a distribution of nucleation undercoolings , 2009 .

[19]  Xinhua Wu,et al.  The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting , 2016 .

[20]  Martin E. Glicksman,et al.  Principles of Solidification , 2011 .

[21]  Matthew S. Dargusch,et al.  Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions , 2015 .

[22]  D. Rojas,et al.  Effect of processing parameters on the evolution of dislocation density and sub-grain size of a 12%Cr heat resistant steel during creep at 650 °C , 2011 .

[23]  Wei Wang,et al.  Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development , 2015, Materials & Design (1980-2015).

[24]  Ryan R. Dehoff,et al.  Site specific control of crystallographic grain orientation through electron beam additive manufacturing , 2015 .

[25]  Ryan R. Dehoff,et al.  Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing ☆ , 2016 .

[26]  Jun Yu Li,et al.  Deformation mechanism during dynamic loading of an additively manufactured AlSi10Mg_200C , 2018 .

[27]  Baode Sun,et al.  A quantitative study of solute diffusion field effects on heterogeneous nucleation and the grain size of alloys , 2011 .

[28]  K. Kakehi,et al.  Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing , 2017 .

[29]  P. Rometsch,et al.  Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting , 2018 .

[30]  A. Spierings,et al.  Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting , 2017 .

[31]  E. Maire,et al.  Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting , 2017 .

[32]  W. Kurz,et al.  SINGLE-CRYSTAL LASER DEPOSITION OF SUPERALLOYS: PROCESSING-MICROSTRUCTURE MAPS , 2001 .

[33]  Martin E. Glicksman,et al.  Dendritic growth into undercooled alloy metals , 1984 .

[34]  N. Takata,et al.  Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments , 2017 .

[35]  Shu Beng Tor,et al.  Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review , 2018 .

[36]  Robert F. Singer,et al.  Grain structure evolution in Inconel 718 during selective electron beam melting , 2016 .

[37]  M. Martorano,et al.  Mechanical Blocking Mechanism for the Columnar to Equiaxed Transition , 2008 .

[38]  Yan Zhou,et al.  Effect of heat treatment on CuCrZr alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism , 2016, Journal of Materials Research and Technology.

[39]  Jean-Pierre Kruth,et al.  Selective laser melting of nano-TiB 2 decorated AlSi10Mg alloy with high fracture strength and ductility , 2017 .

[40]  Wai Yee Yeong,et al.  Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties , 2016 .

[41]  H. Asgari,et al.  On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder , 2017 .

[42]  Reinhart Poprawe,et al.  Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium , 2012 .

[43]  Moataz M. Attallah,et al.  Microstructure and strength of selectively laser melted AlSi10Mg , 2016 .

[44]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[45]  R. Banerjee,et al.  Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys , 2017, Science and technology of advanced materials.

[46]  Yanyan Zhu,et al.  Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing , 2015 .

[47]  Philip B. Prangnell,et al.  Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting , 2013 .

[48]  R. Dehoff,et al.  Solidification and solid-state transformation sciences in metals additive manufacturing * , 2017 .

[49]  Amrita Basak,et al.  Epitaxy and Microstructure Evolution in Metal Additive Manufacturing , 2016 .

[50]  N. Provatas,et al.  Microstructure analysis of AZ31 magnesium alloy welds using phase-field models , 2012 .

[51]  J. Hunt,et al.  Steady state columnar and equiaxed growth of dendrites and eutectic , 1984 .

[52]  Wei Liu,et al.  Textures formed in a CoCrMo alloy by selective laser melting , 2015 .

[53]  Gunther Eggeler,et al.  The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels , 2003 .

[54]  Martin E. Glicksman,et al.  Principles of Solidification: An Introduction to Modern Casting and Crystal Growth Concepts , 2010 .

[55]  Albert C. To,et al.  Quantitative texture prediction of epitaxial columnar grains in additive manufacturing using selective laser melting , 2017 .

[56]  S. Pannala,et al.  The metallurgy and processing science of metal additive manufacturing , 2016 .

[57]  Qudong Wang,et al.  Nanoparticle-inhibited growth of primary aluminum in Al–10Si alloys , 2016 .

[58]  Jikai Liu,et al.  Role of anisotropic properties on topology optimization of additive manufactured load bearing structures , 2017 .

[59]  R. Egerton,et al.  EELS log-ratio technique for specimen-thickness measurement in the TEM. , 1988, Journal of electron microscopy technique.

[60]  Yong-Wei Zhang,et al.  Phase field simulation of powder bed-based additive manufacturing , 2018 .

[61]  Xin Lin,et al.  Grain morphology control and texture characterization of laser solid formed Ti6Al2Sn2Zr3Mo1.5Cr2Nb titanium alloy , 2016 .

[62]  Wilfried Kurz,et al.  Columnar to equiaxed transition in solidification processing , 2001 .

[63]  Peter D. Lee,et al.  Simulation of the columnar-to-equiaxed transition in directionally solidified Al-Cu alloys , 2005 .

[64]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .