Improvement of Creep Strength of 9CrODS Martensitic Steel by Controlling Excess Oxygen and Titanium Concentrations

The effects of chemical compositions (titanium, oxygen) and consolidation temperature on high-temperature mechanical properties of 9Croxide dispersion strengthened steel (9CrODS steel) were investigated. A possible high-temperature strengthening mechanism of 9CrODS steel was discussed based on the experimental results. Creep strength of 9CrODS steel at 973 K was remarkably improved when titanium concentration was 0.35 mass%. A higher amount of added titanium than 0.2 mass% was effective for providing consistently reliable manufacturing of high strength 9CrODS steel because it reduced the effect of oxygen contamination on high-temperature strength. The fraction of elongated � -ferrite grains, which had an ultra-fine oxide particle dispersion, tended to increase with increasing titanium. The elongated grains were considered to improve creep strength of 9CrODS steel. It was also found that creep strength was degraded by elevating the consolidation temperature from 1423 K to 1473 K.