论文信息 - UWB Antenna with 3.5-/5.5-GHz Dual Band-Notched Characteristics Using Two Radiating Stubs

UWB Antenna with 3.5-/5.5-GHz Dual Band-Notched Characteristics Using Two Radiating Stubs

In this letter, a new microstrip antenna for UWB applications is suggested. The antenna is able to filter both of the interference frequency bands of WiMAX and WLAN. The antenna consists of two radiating stubs, a partial ground, and a feed-line. In the configuration, by etching an inverted T- shaped slot on the ground plane, extra resonance is excited, thus broad impedance bandwidth can be obtained. The measured results exhibits that the antenna can cover the bandwidth from 2.7 to 13.0 GHz for VSWR≤ 2 excluding the rejected bands from 3.0 to 3.7 GHz and from 4.9 to 6.0 GHz.

[1] Changiz Ghobadi,et al. Compact CPW‐FED printed monopole antenna with super‐wideband performance , 2011 .

[2] Javad Nourinia,et al. A new compact planar UWB monopole antenna , 2011 .

[3] Peng Jin,et al. Single, Dual and Tri-Band-Notched Ultrawideband (UWB) Antennas Using Capacitively Loaded Loop (CLL) Resonators , 2012, IEEE Transactions on Antennas and Propagation.

[4] Mohammad Akbari. A New Slot Antenna with Triple Stop-Band Performance for UWB Applications , 2013 .

[5] Lin Peng,et al. UWB Band-Notched Monopole Antenna Design Using Electromagnetic-Bandgap Structures , 2011, IEEE Transactions on Microwave Theory and Techniques.

[6] M. Akbari,et al. A CPW Dual Band Notched UWB Antenna , 2012 .

[7] P. S. Hall,et al. Band-Notched UWB Antenna Incorporating a Microstrip Open-Loop Resonator , 2011, IEEE Transactions on Antennas and Propagation.