A stiffness matrix approach for the design of statically balanced planar articulated manipulators

A methodology is developed to determine the spring installation for the design of a statically balanced planar articulated manipulator without parallel auxiliary links. The spring installation is characterized by the connectivity of springs among links, the selection of spring constants, and the locations of spring attachment points. The static equilibrium analysis of the spring-loaded planar articulated manipulator is based on the energy approach, formulated by a constant stiffness block matrix and its associated configuration block matrices. The stiffness block matrix quantifies the resistance or assistance of a manipulator to the change of configuration due to the gravitational forces and the elastic spring forces. Such a matrix uniquely represents both the gravitational potential energy and the elastic potential energy of springs of the system at any configuration. By solving the isotropic condition of the stiffness block matrix, all design parameters of springs can be obtained for any given planar articulated manipulator with prescribed dimensions and inertia. Exact solutions for the locations of attachment points are given in detailed in the examples of a spring-loaded one-, two- and three- degrees of freedom articulated manipulators.

[1]  Clément Gosselin,et al.  Adaptive Robotic Mechanical Systems: A Design Paradigm , 2006 .

[2]  Tariq Rahman,et al.  A simple technique to passively gravity-balance articulated mechanisms , 1995 .

[3]  Goro Tuda,et al.  4383455 Arm with gravity-balancing function , 1984 .

[4]  Sunil K. Agrawal,et al.  Gravity-balancing of spatial robotic manipulators , 2004 .

[5]  M. B. Widden,et al.  The spring-and-lever balancing mechanism, George Carwardine and the Anglepoise lamp , 2000 .

[6]  Clément Gosselin,et al.  Stiffness mapping for parallel manipulators , 1990, IEEE Trans. Robotics Autom..

[7]  Sébastien Briot,et al.  Optimum static balancing of the parallel robot for medical 3D-ultrasound imaging , 2007 .

[8]  Dar-Zen Chen,et al.  Design of Perfectly Statically Balanced One-DOF Planar Linkages With Revolute Joints Only , 2009 .

[9]  K. J. Fisher.  Designer's case file : counterbalance mechanism positions a light with surgical precision , 1992 .

[10]  Harry Brodmann,et al.  The support apparatus , 1993 .

[11]  Just L. Herder,et al.  Spring-to-Spring Balancing as Energy-Free Adjustment Method in Gravity Equilibrators , 2011 .

[12]  S.K. Agrawal,et al.  Theory and design of an orthotic device for full or partial gravity-balancing of a human leg during motion , 2004, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[13]  R. H. Nathan.  A Constant Force Generation Mechanism , 1985 .

[14]  D. A. Streit,et al.  Equilibrators for Planar Linkages , 1993 .

[15]  Vigen Arakelian,et al.  Improvement of balancing accuracy of robotic systems: Application to leg orthosis for rehabilitation devices , 2008 .

[16]  Clément Gosselin,et al.  A Statically Balanced Gough/Stewart-Type Platform: Conception, Design, and Simulation , 2009 .

[17]  Sébastien Krut,et al.  Design of a 3D gravity balanced orthosis for upper limb , 2008, 2008 IEEE International Conference on Robotics and Automation.

[18]  Sunil K. Agrawal,et al.  Design and fabrication of an active gravity balanced planar mechanism using auxiliary parallelograms , 2001 .

[19]  Just L. Herder,et al.  Gravity-Balanced Arm Support With Energy-Free Adjustment , 2007 .

[20]  Lung-Wen Tsai,et al.  Mechanism Design: Enumeration of Kinematic Structures According to Function , 2001 .

[21]  Dar-Zen Chen,et al.  Design of Perfectly Static-Balanced One-DOF Planar Linkage With Revolute Joint Only , 2008 .