On the Influence of Sterilization Conditions Using Gamma Irradiation on the Properties of Polylactide-Sponge Materials

[1]  I. Babichenko,et al.  Influence of the Degree of Deacetylation of Chitosan and BMP-2 Concentration on Biocompatibility and Osteogenic Properties of BMP-2/PLA Granule-Loaded Chitosan/β-Glycerophosphate Hydrogels , 2021, Molecules.

[2]  V. Sevastianov,et al.  Investigation of bioresorbable porous implants based on polylactide and polycaprolactone , 2020 .

[3]  S. Chvalun,et al.  Biodegradable poly(l-lactide)/calcium phosphate composites with improved properties for orthopedics: Effect of filler and polymer crystallinity. , 2020, Materials science & engineering. C, Materials for biological applications.

[4]  I. Babichenko,et al.  Osteoinductive potential of highly porous polylactide granules and Bio-Oss impregnated with low doses of BMP-2 , 2020, IOP Conference Series: Earth and Environmental Science.

[5]  Changyu Shen,et al.  Effect of different sterilization methods on the properties of commercial biodegradable polyesters for single-use, disposable medical devices. , 2019, Materials science & engineering. C, Materials for biological applications.

[6]  N. M. Ivanova,et al.  Polylactic acid properties after steam sterilization and possibility of its using as a corneal implant , 2019, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019.

[7]  T. Grigoriev,et al.  Effect of Molecular Characteristics and Morphology on Mechanical Performance and Biocompatibility of PLA-Based Spongious Scaffolds , 2018, BioNanoScience.

[8]  V. Vasilets,et al.  BIOCOMPATIBLE AND MATRIX PROPERTIES OF POLYLACTIDE SCAFFOLDS , 2018, Russian Journal of Transplantology and Artificial Organs.

[9]  A. Jakus,et al.  3D-printing porosity: A new approach to creating elevated porosity materials and structures. , 2018, Acta biomaterialia.

[10]  E. Popova,et al.  Production of Monofilaments from Polylactide Melt: Structure, Properties, and Biocompatibility , 2017, Fibre Chemistry.

[11]  D. Machado,et al.  Biocompatibility Assessment of Poly(lactic acid) Films after Sterilization with Ethylene Oxide in Histological Study In Vivo with Wistar Rats and Cellular Adhesion of Fibroblasts In Vitro , 2017 .

[12]  Y. Ramot,et al.  Biocompatibility and safety of PLA and its copolymers. , 2016, Advanced drug delivery reviews.

[13]  S. Pillai,et al.  Effect of gamma irradiation on physicochemical properties of commercial poly(lactic acid) clamshell for food packaging , 2016 .

[14]  S. Razavi,et al.  Effect of gamma ray on poly(lactic acid)/poly(vinyl acetate-co-vinyl alcohol) blends as biodegradable food packaging films , 2014 .

[15]  Y. Nho,et al.  Degradation behavior of poly (l-lactide-co-glycolide) films through gamma-ray irradiation , 2012 .

[16]  M. Ohshima,et al.  Preparation of poly(L-lactic acid) honeycomb monolith structure by unidirectional freezing and freeze-drying , 2008 .

[17]  Cristina L. M. Silva,et al.  Ethylene oxide sterilization of medical devices: a review. , 2007, American journal of infection control.

[18]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[19]  J C Middleton,et al.  Synthetic biodegradable polymers as orthopedic devices. , 2000, Biomaterials.

[20]  Mool C. Gupta,et al.  Radiation effects on poly(lactic acid) , 1983 .

[21]  H. Dolder,et al.  Vero cell growth and differentiation on poly(L-lactic acid) membranes of different pore diameters. , 2001, Artificial organs.

[22]  R Langer,et al.  Neocartilage formation in vitro and in vivo using cells cultured on synthetic biodegradable polymers. , 1993, Journal of biomedical materials research.