Effect of Cr addition on corrosion behavior of cupronickel alloy in 3.5 wt.% NaCl solution

[1]  F. Huang,et al.  Quantitative micro-electrochemical study of duplex stainless steel 2205 in 3.5wt% NaCl solution , 2022, International Journal of Minerals, Metallurgy and Materials.

[2]  Ping Liu,et al.  Effect of Fe/Mn content on mechanical and corrosion properties of 90/10 copper–nickel alloy , 2022, Materials and Corrosion.

[3]  Dalei Zhang,et al.  Multiscale characterization of seawater pipe erosion of B10 copper–nickel alloy welded joints , 2022, Scientific Reports.

[4]  Huajie Tang,et al.  Effects of Alloying Elements and Microstructure on Stainless Steel Corrosion: A Review , 2021, steel research international.

[5]  Ping Liu,et al.  Effect of iron on the composition and structure of corrosion product film formed in 70/30 copper-nickel alloy , 2021 .

[6]  Lingping Zhou,et al.  Corrosion behavior of Cu−Al−Mn−Zn−Zr shape memory alloy in NaCl solution , 2021, Transactions of Nonferrous Metals Society of China.

[7]  Guohua Wu,et al.  Effect of NaOH concentration on microstructure and corrosion resistance of MAO coating on cast Al−Li alloy , 2021 .

[8]  R. Zhang,et al.  Investigation of corrosion characteristics of Cu-10Ni-1.2Fe-xMn (x = 0.53, 0.87, 1.19) alloy in 3.5% NaCl solution , 2021, RSC advances.

[9]  Zhenyao Wang,et al.  Corrosion behavior of copper in extremely harsh marine atmosphere in Nansha Islands, China , 2021 .

[10]  M. C. Manjabacas,et al.  Low initial lubrication procedure in the machining of copper-nickel 70/30 ASTM B122 alloy , 2021 .

[11]  Amlan Das,et al.  Electrochemically functionalized graphene as an anti-corrosion reinforcement in Cu matrix composite thin films , 2019, International Journal of Minerals, Metallurgy and Materials.

[12]  Zhou Li,et al.  High-strength, ductility and corrosion-resistant in a novel Cu20Ni20Mn0.3Cr0.3Al alloy , 2020 .

[13]  Yongfeng Yuan,et al.  Effect of microstructure and passive film on corrosion resistance of 2507 super duplex stainless steel prepared by different cooling methods in simulated marine environment , 2020, International Journal of Minerals, Metallurgy and Materials.

[14]  Yinghui Zhang Microstructure and Corrosion Behavior of as-cast 90Cu-10Ni Alloys with Different Yttrium Content , 2020 .

[15]  R. Gupta,et al.  Review—Corrosion-Resistant Metastable Al Alloys: An Overview of Corrosion Mechanisms , 2020 .

[16]  Kun Li,et al.  Microstructure, Corrosion Behaviour and Microhardness of Non-equiatomic Fe1.5CoNiCrCux (0.5 ≤ x ≤ 2.0) High-Entropy Alloys , 2019, Transactions of the Indian Institute of Metals.

[17]  Weifang Zhang,et al.  Surface Characterization and Corrosion Behavior of 90/10 Copper-Nickel Alloy in Marine Environment , 2019, Materials.

[18]  Fu-hui Wang,et al.  Influence of hydrostatic pressure on the corrosion behavior of 90/10 copper-nickel alloy tube under alternating dry and wet condition , 2019, Corrosion Science.

[19]  Rongwei Zhang,et al.  Corrosion characteristic of Cu-10Ni-Fex in 3.5 % NaCl , 2018, International Journal of Electrochemical Science.

[20]  Yu-gui Zheng,et al.  Evolution of the Corrosion Product Film and Its Effect on the Erosion–Corrosion Behavior of Two Commercial 90Cu–10Ni Tubes in Seawater , 2018, Acta Metallurgica Sinica (English Letters).

[21]  X. Leng,et al.  Electronic properties of the passive films growth on Cu-Ni alloy from the viewpoint of point defect model and power-law model , 2018, Materials Research Express.

[22]  Dierk Raabe,et al.  Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution , 2018 .

[23]  H. Nady,et al.  Corrosion behavior and electrochemical properties of carbon steel, commercial pure titanium, copper and copper–aluminum–nickel alloy in 3.5% sodium chloride containing sulfide ions , 2017 .

[24]  Yu-gui Zheng,et al.  Electrochemical Behavior of Three 90Cu-10Ni Tubes from Different Manufacturers After Immersion in 3.5% NaCl Solution , 2017, Journal of Materials Engineering and Performance.

[25]  Xin-hua Liu,et al.  Effects of Fe content on the microstructure and properties of CuNi10FeMn1 alloy tubes fabricated by HCCM horizontal continuous casting , 2016, International Journal of Minerals, Metallurgy, and Materials.

[26]  W. Ke,et al.  Corrosion product film formed on the 90/10 copper–nickel tube in natural seawater: Composition/structure and formation mechanism , 2015 .

[27]  X. Qiu,et al.  Influence of Cr on the electronic properties of passive film on B30 alloy in NaOH solution , 2015, Chemical Research in Chinese Universities.

[28]  G. Kipouros,et al.  Electrochemical behaviour of synthetic 90/10 Cu–Ni alloy containing alloying additions in marine environment , 2013 .

[29]  K. Kurzydłowski,et al.  Passivation of Al–Cr–Fe and Al–Cu–Fe–Cr complex metallic alloys in 1 M H2SO4 and 1 M NaOH solutions , 2011 .

[30]  W. Badawy,et al.  Effect of nickel content on the electrochemical behavior of Cu–Al–Ni alloys in chloride free neutral solutions , 2010 .

[31]  C. Dong,et al.  Highly corrosion-resistant Cu70(Ni,Fe,Mn,Cr)30 cupronickel designed using a cluster model for stable solid solutions , 2010 .

[32]  Yuchang Su,et al.  Comparative study on the electrochemical performance of the Cu–30Ni and Cu–20Zn–10Ni alloys , 2010 .

[33]  Yisheng Zhang,et al.  Corrosion behavior of copper with minor alloying addition in chloride solution , 2008 .

[34]  S. Yuan,et al.  Surface characterization and corrosion behavior of 70/30 Cu-Ni alloy in pristine and sulfide-containing simulated seawater , 2007 .

[35]  Ji Hyun Kim,et al.  Development of an in situ Raman spectroscopic system for surface oxide films on metals and alloys in high temperature water , 2005 .

[36]  S. Pehkonen,et al.  Copper corrosion in mildly alkaline water with the disinfectant monochloramine , 2002 .

[37]  Dalva Lúcia Araújo de Faria,et al.  Raman microspectroscopy of some iron oxides and oxyhydroxides , 1997 .

[38]  Joseph C. Farmer,et al.  In Situ Raman Spectroscopy of Anodic Films Formed on Copper and Silver in Sodium Hydroxide Solution , 1986 .