Integrity analysis of reactor pressure vessels subjected to pressurized thermal shocks by XFEM

Abstract The integrity of an reactor pressure vessel (RPV) related to Pressurized Thermal Shocks (PTSs) has been widely studied. However, due to the difficulties associated with the crack modeling with the 3-D finite element method (FEM), it is preferred to use models with simple geometries and crack configurations. In the last years new improved FEMs were developed which include the singularities and discontinuities and simplify the computational fracture mechanics studies. One of those methods, the eXtended Finite Element Method (XFEM) relies on the introduction of the crack effect with an enrichment of the finite element approximation space. This paper introduces the use of XFEM to the structural analysis of an RPV subjected to PTSs. The analysis compares the stress intensity factor (SIF) calculated with XFEM with results obtained by conventional FEM calculations.

[1]  Eugenio Giner,et al.  Domain integral formulation for 3-D curved and non-planar cracks with the extended finite element method , 2013 .

[2]  Brian Moran,et al.  Energy release rate along a three-dimensional crack front in a thermally stressed body , 1986, International Journal of Fracture.

[3]  Xian-Kui Zhu,et al.  Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization , 2012 .

[4]  V. F. González-Albuixech,et al.  Convergence of domain integrals for stress intensity factor extraction in 2‐D curved cracks problems with the extended finite element method , 2013 .

[5]  J. D. Eshelby.  The elastic energy-momentum tensor , 1975 .

[6]  T. Belytschko,et al.  Non‐planar 3D crack growth by the extended finite element and level sets—Part II: Level set update , 2002 .

[7]  T. Belytschko,et al.  Extended finite element method for three-dimensional crack modelling , 2000 .

[8]  Guian Qian,et al.  Integrity analysis of a reactor pressure vessel subjected to pressurized thermal shocks by considering constraint effect , 2013 .

[9]  T. Belytschko,et al.  Non‐planar 3D crack growth by the extended finite element and level sets—Part I: Mechanical model , 2002 .

[10]  Ted Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[11]  G. Odette,et al.  Irradiation Embrittlement of Reactor Pressure Vessel Steels: Mechanisms, Models, and Data Correlations , 1986 .

[12]  Guian Qian,et al.  Procedures, methods and computer codes for the probabilistic assessment of reactor pressure vessels subjected to pressurized thermal shocks , 2013 .

[13]  Markus Niffenegger,et al.  The proper use of thermal expansion coefficients in finite element calculations , 2012 .

[14]  Guian Qian,et al.  Deterministic and probabilistic analysis of a reactor pressure vessel subjected to pressurized thermal shocks , 2014 .

[15]  Dkm Shum,et al.  Application of J-Q Fracture Methodology to the Analysis of Pressurized Thermal Shock in Reactor Pressure Vessels , 1994 .

[16]  M. Duflot.  A study of the representation of cracks with level sets , 2007 .

[17]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[18]  Brian Moran,et al.  Crack tip and associated domain integrals from momentum and energy balance , 1987 .

[19]  E. Keim,et al.  Life Management of Reactor Pressure Vessels under Pressurized Thermal Shock Loading : Deterministic Procedure and Application to Western and Eastern Type of Reactors , 2001 .