Toughening of epoxy resin modified with in situ polymerized thermoplastic polymers

Abstract A thermoplastic polymer modification was tried for the purpose of simultaneously improving the heat resistance and toughness of a cured epoxy resin. The thermoplastic polymer was formed during the cure process of the epoxy resin in order to avoid any increase in the viscosity of the resin at the time of mixing. When 24 wt% of the phenylmaleimide/benzyl methacrylate/styrene monomers with a molar ratio composition of 5/5/3 was added to epoxy and phenol resins, the resin viscosity at mixing fell to about 1/8 of an unmodified resin. The epoxy and phenol resins were cured, forming a thermoplastic polymer by radical polymerization of these monomers. The glass transition temperature (Tg) of the cured resin was improved by about 10°C and the value of the fracture toughness was also improved by about 2.5 times that of the unmodified resin. This is attributed to the formation of the semi-interpenetrating polymer networks (semi-IPN) composed of the epoxy network and linear thermoplastic polymer.

[1]  F. Chang,et al.  Single-phase and multiple-phase thermoplastic/thermoset polyblends: 2. Morphologies and mechanical properties of phenoxy/epoxy blends , 1996 .

[2]  J. An,et al.  Effects of morphology on toughening of tetrafunctional epoxy resins with poly(ether imide) , 1993 .

[3]  A. Yee,et al.  Toughening mechanisms in elastomer-modified epoxies , 1986 .

[4]  Albert F. Yee,et al.  Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxies , 1991 .

[5]  J. Hedrick,et al.  Chemical modification of matrix resin networks with engineering thermoplastics: 1. Synthesis, morphology, physical behaviour and toughening mechanisms of poly(arylene ether sulphone) modified epoxy networks , 1991 .

[6]  W. Bascom,et al.  The fracture of epoxy- and elastomer-modified epoxy polymers in bulk and as adhesives , 1975 .

[7]  S. Shaw,et al.  Deformation and fracture behaviour of a rubber-toughened epoxy: 2. Failure criteria , 1983 .

[8]  J. Hedrick,et al.  Chemical modification of matrix Resin networks with engineering thermoplastics , 1985 .

[9]  A. Kinloch,et al.  Modelling of the toughening mechanisms in rubber-modified epoxy polymers , 1992, Journal of Materials Science.

[10]  N. Tanaka,et al.  Synthesis and Properties of Interpenetrating Polymer Networks Composed of Epoxy Resins and Polysulphones with Cross-linkable Pendant Vinylbenzyl Groups , 1997 .

[11]  B. Sillion,et al.  Polyimide-modified epoxy system: time-temperature-transformation diagrams, mechanical and thermal properties , 1994 .

[12]  C. Bucknall,et al.  Toughening tetrafunctional epoxy resins using polyetherimide , 1989 .

[13]  R. Assink,et al.  Morphology and toughness characterization of epoxy resins modified with amine and carboxyl terminated rubbers , 1982 .

[14]  Takashi Inoue,et al.  Phase separation mechanism of rubber-modified epoxy , 1990 .

[15]  Hiromi Ito,et al.  Improvement of thermal and mechanical properties by control of morphologies in PES-modified epoxy resins , 2000 .

[16]  D. J. Hourston,et al.  The toughening of epoxy resins with thermoplastics: 1. Trifunctional epoxy resin-polyetherimide blends , 1992 .

[17]  Takashi Inoue,et al.  Structure development in epoxy resin modified with poly(ether sulphone) , 1989 .