The influence of exit tip thickness of nozzle δe on the flow field and performance of a jet pump was studied numerically in this paper. It is found that δe has influence on the distribution of turbulence kinetic energy k. If δe is ignored, k takes the highest value but dissipates rapidly than that of nozzle with a certain tip thickness. δe also affect apparently the development of tip vortex, which will occur near the exit tip of nozzle. The bigger the δe is, the larger the vortex is. The tip vortex develops with the increase of flow rate ratio q. When q=1 and δe=0.6∼0.8mm, a small vortex will be found downstream the tip vortex. And a concomitant vortex happens down the tip vortex in the case of q=1 and δe=0.8mm. As q increases to 2, the downstream small vortex disappears and the concomitant vortex becomes bigger. It is also found that the tip vortex might interact with the possible backflow that formed in the throat tube and parts of suction chamber. The center of backflow was affect evidently by δe. With the increase of δe, the center of backflow under the same q will go downstream. When δe=0.4mm, the center of backflow goes farthest. Then, as the further increase of δe, the center of backflow will go back some distance. Although, δe has relatively great influence on the flow field within the jet pump, it exerts only a little impact on the performance of jet pump. When δe=0.2∼0.6mm, the jet pump possess better performance. In most case, it is reasonable to ignore the nozzle exit tip thickness in performance prediction for the purpose of simplicity.