An Optimum Design Method for a Thermal-Fluid Device Incorporating Multiobjective Topology Optimization With an Adaptive Weighting Scheme

[1]  G. Morini.  Single-phase Convective Heat Transfer in Microchannels: a Review of Experimental Results , 2004 .

[2]  Ercan M. Dede,et al.  Optimization and Design of a Multipass Branching Microchannel Heat Sink for Electronics Cooling , 2012 .

[3]  J. Maveety,et al.  Design of an optimal pin-fin heat sink with air impingement cooling , 2000 .

[4]  Takayuki Yamada,et al.  Pareto frontier exploration in multiobjective topology optimization using adaptive weighting and point selection schemes , 2017 .

[5]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[6]  James K. Guest,et al.  Topology Optimization of Fixed-Geometry Fluid Diodes , 2015 .

[7]  Takayuki Yamada,et al.  A topology optimization method based on the level set method incorporating a fictitious interface energy , 2010 .

[8]  Lothar Thiele,et al.  Multiobjective Optimization Using Evolutionary Algorithms - A Comparative Case Study , 1998, PPSN.

[9]  Emílio Carlos Nelli Silva,et al.  Development of heat sink device by using topology optimization , 2013 .

[10]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[11]  Qing Li,et al.  A variational level set method for the topology optimization of steady-state Navier-Stokes flow , 2008, J. Comput. Phys..

[12]  Juhani Koski,et al.  Multicriteria Truss Optimization , 1988 .

[13]  John E. Dennis,et al.  Normal-Boundary Intersection: A New Method for Generating the Pareto Surface in Nonlinear Multicriteria Optimization Problems , 1998, SIAM J. Optim..

[14]  Ercan M. Dede,et al.  Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink , 2015 .

[15]  William Prager,et al.  A note on discretized michell structures , 1974 .

[16]  O. Pironneau.  Optimal Shape Design for Elliptic Systems , 1983 .

[17]  Tsuyoshi Nomura,et al.  Topology optimization for fluid–thermal interaction problems under constant input power , 2013 .

[18]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[19]  Anne Auger,et al.  Theory of the hypervolume indicator: optimal μ-distributions and the choice of the reference point , 2009, FOGA '09.

[20]  Jacek Rokicki,et al.  Adjoint Lattice Boltzmann for topology optimization on multi-GPU architecture , 2015, Comput. Math. Appl..

[21]  Xianmin Zhang,et al.  Level Set-Based Topology Optimization of Hinge-Free Compliant Mechanisms Using a Two-Step Elastic Modeling Method , 2014 .

[22]  Kalyanmoy Deb,et al.  Multi-objective optimization using evolutionary algorithms , 2001, Wiley-Interscience series in systems and optimization.

[23]  Takayuki Yamada,et al.  A topology optimization method for a coupled thermal–fluid problem using level set boundary expressions , 2015 .

[24]  J. Meyer,et al.  Combined Numerical Optimization and Constructal Theory for the Design of Microchannel Heat Sinks , 2010 .

[25]  S. Whitaker.  Flow in porous media I: A theoretical derivation of Darcy's law , 1986 .

[26]  Gyung-Jin Park,et al.  Topology Optimization for Structures With Nonlinear Behavior Using the Equivalent Static Loads Method , 2012 .

[27]  Takayuki Yamada,et al.  Gradient-based multiobjective optimization using a distance constraint technique and point replacement , 2016 .

[28]  Sung Jin Kim,et al.  Methods for Thermal Optimization of Microchannel Heat Sinks , 2004 .

[29]  Takayuki Yamada,et al.  Multiobjective optimization using an aggregative gradient-based method , 2015 .

[30]  L. Lasdon,et al.  On a bicriterion formation of the problems of integrated system identification and system optimization , 1971 .

[31]  Ole Sigmund,et al.  Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection , 2015, ArXiv.

[32]  Bin Zhang,et al.  Topology optimization design of non-Newtonian roller-type viscous micropumps , 2016 .

[33]  Zhenyu Liu,et al.  Topology optimization of steady and unsteady incompressible Navier–Stokes flows driven by body forces , 2013 .

[34]  A. Glezer,et al.  Design and Thermal Characteristics of a Synthetic Jet Ejector Heat Sink , 2005 .

[35]  Kwan-Soo Lee,et al.  Optimum design of a radial heat sink under natural convection , 2011 .

[36]  W. Yan,et al.  Optimal design of geometric parameters of double-layered microchannel heat sinks , 2012 .

[37]  A. Messac,et al.  The normalized normal constraint method for generating the Pareto frontier , 2003 .

[38]  Takayuki Yamada,et al.  Topology optimization in thermal-fluid flow using the lattice Boltzmann method , 2016, J. Comput. Phys..

[39]  Takayuki Yamada,et al.  A Level Set-Based Topology Optimization Method for Maximizing Thermal Diffusivity in Problems Including Design-Dependent Effects , 2011 .

[40]  Shiwei Zhou,et al.  Multiobjective topology optimization for finite periodic structures , 2010 .

[41]  J. Petersson,et al.  Topology optimization of fluids in Stokes flow , 2003 .

[42]  Jan Sokolowski,et al.  Introduction to shape optimization , 1992 .

[43]  James D. Van de Ven,et al.  Integrated Mechanical and Thermodynamic Optimization of an Engine Linkage Using a Multi-Objective Genetic Algorithm , 2015 .

[44]  Hirotaka Nakayama.  Trade-off analysis using parametric optimization techniques , 1992 .

[45]  I. Mudawar,et al.  Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink , 2002 .

[46]  O. Sigmund,et al.  Topology optimization of channel flow problems , 2005 .

[47]  R. Pease,et al.  High-performance heat sinking for VLSI , 1981, IEEE Electron Device Letters.

[48]  Krister Svanberg,et al.  Optimization of geometry in truss design , 1981 .

[49]  W. Calderón-Muñoz,et al.  Thermal design exploration of a swirl flow microchannel heat sink for high heat flux applications based on numerical simulations , 2016 .

[50]  Tapabrata Ray,et al.  Multi-Objective Optimization With Multiple Spatially Distributed Surrogates , 2016 .

[51]  J. Koski.  Defectiveness of weighting method in multicriterion optimization of structures , 1985 .

[52]  Jaewook Lee,et al.  Topology optimization of switched reluctance motors for the desired torque profile , 2010 .

[53]  Sarah L. Mitchell,et al.  Computational multiobjective topology optimization of silicon anode structures for lithium-ion batteries , 2016 .

[54]  Wan Seon Shin,et al.  Interactive multiple objective optimization: Survey I - continuous case , 1991, Comput. Oper. Res..

[55]  O. Sigmund,et al.  Topology optimisation for natural convection problems , 2014, 1408.2102.