Capability for Fine Tuning of the Refractive Index Sensing Properties of Long-Period Gratings by Atomic Layer Deposited Al2O3 Overlays

This work presents an application of thin aluminum oxide (Al2O3) films obtained using atomic layer deposition (ALD) for fine tuning the spectral response and refractive-index (RI) sensitivity of long-period gratings (LPGs) induced in optical fibers. The technique allows for an efficient and well controlled deposition at monolayer level (resolution ∼ 0.12 nm) of excellent quality nano-films as required for optical sensors. The effect of Al2O3 deposition on the spectral properties of the LPGs is demonstrated experimentally and numerically. We correlated both the increase in Al2O3 thickness and changes in optical properties of the film with the shift of the LPG resonance wavelength and proved that similar films are deposited on fibers and oxidized silicon reference samples in the same process run. Since the thin overlay effectively changes the distribution of the cladding modes and thus also tunes the device's RI sensitivity, the tuning can be simply realized by varying number of cycles, which is proportional to thickness of the high-refractive-index (n > 1.6 in infrared spectral range) Al2O3 film. The advantage of this approach is the precision in determining the film properties resulting in RI sensitivity of the LPGs. To the best of our knowledge, this is the first time that an ultra-precise method for overlay deposition has been applied on LPGs for RI tuning purposes and the results have been compared with numerical simulations based on LP mode approximation.

[1]  Predrag Mikulic,et al.  A Novel Fiber-Optic Tapered Long-Period Grating Sensor for Pressure Monitoring , 2007, IEEE Transactions on Instrumentation and Measurement.

[2]  Richard O. Claus,et al.  Optical fiber gas sensors based on hydrophobic alumina thin films formed by the electrostatic self-assembly monolayer process , 2003 .

[3]  Wojtek J. Bock,et al.  Application of diamond-like carbon films in optical fibre sensors based on long-period gratings , 2007 .

[4]  Philippe Lalanne,et al.  Optimization of sensitivity in Long Period Fiber Gratings with overlay deposition. , 2005, Optics Express.

[5]  S. James,et al.  Modification of the refractive index response of long period gratings using thin film overlays , 2005 .

[6]  J. Judkins,et al.  Long-period fiber gratings as band-rejection filters , 1995 .

[7]  Richard O. Claus,et al.  Ammonia optical fiber sensor based on self-assembled zirconia thin films , 2005 .

[8]  Cosimo Trono,et al.  Giant sensitivity of long period gratings in transition mode near the dispersion turning point: an integrated design approach. , 2012, Optics letters.

[9]  Lutz Kirste,et al.  Mechanical and electrical properties of plasma and thermal atomic layer deposited Al2O3 films on GaAs and Si , 2013 .

[10]  Ian Bennion,et al.  Sensitivity characteristics of long-period fiber gratings , 2002 .

[11]  Zhengtian Gu,et al.  Design optimization of an intensity-interrogated long-period fibre grating film sensor operating near the phase-matching turning point , 2012 .

[12]  Ralph P. Tatam,et al.  Optical fibre long period grating based selective vapour sensing of volatile organic compounds , 2010 .

[13]  P. Wentzell,et al.  Modeling the Response of a Long-Period Fiber Grating to Ambient Refractive Index Change in Chemical Sensing Applications , 2008, Journal of Lightwave Technology.

[14]  M. Daimon,et al.  Measurement of the refractive index of distilled water from the near-infrared region to the ultraviolet region. , 2007, Applied optics.

[15]  Wojtek J. Bock,et al.  Effect of high-temperature plasma-deposited nano-overlays on the properties of long-period gratings written with UV and electric arc in non-hydrogenated fibers , 2013 .

[16]  Wojtek J. Bock,et al.  Detection of bacteria using bacteriophages as recognition elements immobilized on long-period fiber gratings. , 2011, Optics express.

[17]  Ignacio Del Villar,et al.  Resonances in coated long period fiber gratings and cladding removed multimode optical fibers: a comparative study. , 2010, Optics express.

[18]  Predrag Mikulic,et al.  Pressure Sensing in High-Refractive-Index Liquids Using Long-Period Gratings Nanocoated with Silicon Nitride , 2010, Sensors.

[19]  Bloomer,et al.  Optical dispersion relations for amorphous semiconductors and amorphous dielectrics. , 1986, Physical review. B, Condensed matter.

[20]  I. del Villar,et al.  Two-Layer Nanocoatings in Long-Period Fiber Gratings for Improved Sensitivity of Humidity Sensors , 2008, IEEE Transactions on Nanotechnology.

[21]  Martin Moskovits,et al.  Chemical corrosion protection of optical components using atomic layer deposition. , 2009, Applied optics.

[22]  Wojtek J. Bock,et al.  Comparative study of long-period gratings written in a boron co-doped fiber by an electric arc and UV irradiation , 2010 .

[23]  Wojtek J. Bock,et al.  Evolution of optical properties with deposition time of silicon nitride and diamond-like carbon films deposited by radio-frequency plasma-enhanced chemical vapor deposition method , 2011 .

[24]  Daniel Poitras,et al.  Plasma deposition of optical films and coatings: A review , 2000 .

[25]  Jacques Albert,et al.  Anomalous permittivity and plasmon resonances of copper nanoparticle conformal coatings on optical fibers , 2011 .

[26]  Han-Bo-Ram Lee,et al.  Applications of atomic layer deposition to nanofabrication and emerging nanodevices , 2009 .

[27]  Siddharth Ramachandran,et al.  Analysis of optical response of long period fiber gratings to nm-thick thin-film coating. , 2005, Optics express.

[28]  Zhengtian Gu,et al.  Design optimization of a long-period fiber grating with sol-gel coating for a gas sensor , 2007 .

[29]  Predrag Mikulic,et al.  Tuning properties of long-period gratings by atomic layer deposited zinc oxide nano-coating , 2013, Other Conferences.