A review of using waste and virgin polymer in pavement

[1]  Arthur H. Purcell,et al.  Energy and environmental impacts of materials alternatives: An assessment of quantitative understanding , 1976 .

[2]  G. Kraus,et al.  Modification of Asphalt by Block Polymers of Butadiene and Styrene , 1982 .

[3]  T. Randall Curlee.  Plastics recycling: Economic and institutional issues , 1986 .

[4]  A Berker,et al.  Rheology and Microstructure of Polymer/Asphalt Blends , 1991 .

[5]  R. Woodhams,et al.  Asphalt-polyolefin emulsion breakdown , 1991 .

[6]  Art Bergan,et al.  A mechanistic evaluation of modified asphalt paving mixtures , 1994 .

[7]  J. Zieliński,et al.  An effect of polymers on thermal stability of bitumens , 1995 .

[8]  Amelia L. Craighill,et al.  Lifecycle assessment and economic evaluation of recycling: A case study , 1996 .

[9]  Carlo Giavarini,et al.  Production of stable polypropylene-modified bitumens , 1996 .

[10]  Xiaohu Lu,et al.  Rheological characterization of styrene-butadiene-styrene copolymer modified bitumens , 1997 .

[11]  J. Fink,et al.  Plastics recycling coupled with enhanced oil recovery. A. critical survey of the concept , 1997 .

[12]  Ernst Worrell,et al.  Plastics streams in Germany : an analysis of production, consumption and waste generation , 1998 .

[13]  Necati Kuloglu,et al.  Effect of Astragalus on Characteristics of Asphalt Concrete , 1999 .

[14]  B. Adhikari,et al.  Reclamation and recycling of waste rubber , 2000 .

[15]  J-F Corte,et al.  DEVELOPMENT AND USES OF HARD-GRADE ASPHALT AND OF HIGH-MODULUS ASPHALT MIXES IN FRANCE , 2001 .

[16]  M. O’Mahony,et al.  RECYCLED POLYMERS FOR USE AS BITUMEN MODIFIERS , 2001 .

[17]  Yvonne Becker,et al.  Polymer modified asphalt , 2001 .

[18]  Gordon Airey,et al.  Rheological evaluation of ethylene vinyl acetate polymer modified bitumens , 2002 .

[19]  F. Martínez-Boza,et al.  Rheological Techniques as a Tool To Analyze Polymer−Bitumen Interactions: Bitumen Modified with Polyethylene and Polyethylene-Based Blends , 2002 .

[20]  Antxon Santamaria,et al.  Influence of the processing conditions on the rheological behaviour of polymer-modified bitumen , 2003 .

[21]  Arthur Garforth,et al.  Feedstock recycling of polymer wastes , 2004 .

[22]  S Hınıslıoglu,et al.  Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix , 2004 .

[23]  Ali Topal,et al.  Use of asphalt roofing shingle waste in HMA , 2005 .

[24]  G. Polacco,et al.  Asphalt modification with different polyethylene-based polymers , 2005 .

[25]  Antxon Santamaria,et al.  Bitumen/polyethylene blends: using m-LLDPEs to improve stability and viscoelastic properties , 2006 .

[26]  G. Polacco,et al.  Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts , 2006 .

[27]  G. Baumgardner,et al.  Polyphosphoric acid use in asphalt: more than 40 years experience , 2006 .

[28]  M. Abdel-Goad.  Waste polyvinyl chloride-modified bitumen , 2006 .

[29]  Martin Kumar Patel,et al.  Plastics materials flow analysis for India , 2006 .

[30]  C. Gallegos,et al.  Effect of waste polymer addition on the rheology of modified bitumen , 2006 .

[31]  Mohammad T. Awwad,et al.  The Use of Polyethylene in Hot Asphalt Mixtures , 2007 .

[32]  Hee Mun Park,et al.  Performance evaluation of high modulus asphalt mixtures for long life asphalt pavements , 2007 .

[33]  Y. Yildirim.  Polymer modified asphalt binders , 2007 .

[34]  Ming Yu,et al.  Storage stability and compatibility of asphalt binder modified by SBS graft copolymer , 2007 .

[35]  Yue Huang,et al.  A review of the use of recycled solid waste materials in asphalt pavements , 2007 .

[36]  M. Gilchrist,et al.  Development of a recycled polymer modified binder for use in stone mastic asphalt , 2008 .

[37]  D. Lesueur.  The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification. , 2009, Advances in colloid and interface science.

[38]  Nader Tabatabaee,et al.  Proposals for modification of Iranian bitumen to meet the climatic requirements of Iran , 2009 .

[39]  M. Estevez.  Use of coupling agents to stabilize asphalt–rubber–gravel composite to improve its mechanical properties , 2009 .

[40]  Tan Yiqiu,et al.  Effect of polyethylene on life of flexible pavements , 2009 .

[41]  Zhigang Shen,et al.  The reuse of nonmetals recycled from waste printed circuit boards as reinforcing fillers in the polypropylene composites. , 2009, Journal of hazardous materials.

[42]  João C. Bordado,et al.  Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: A comparative analysis , 2009 .

[43]  Shujing Zhu,et al.  Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: Pavement performance and environmental impact , 2009 .

[44]  Baoshan Huang,et al.  Laboratory evaluation of incorporating waste ceramic materials into Portland cement and asphaltic concrete , 2009 .

[45]  Shu-tang Liu,et al.  Influence of aluminate coupling agent on low-temperature rheological performance of asphalt mastic , 2010 .

[46]  Abdulkadir Çevik,et al.  Prediction of Marshall test results for polypropylene modified dense bituminous mixtures using neural networks , 2010, Expert Syst. Appl..

[47]  G. Nando,et al.  Thermoplastic elastomers from waste polyethylene and reclaim rubber blends and their composites with fly ash , 2010 .

[48]  S. M. Abtahi,et al.  Fiber-reinforced asphalt-concrete – A review , 2010 .

[49]  Yang Kang,et al.  Reaction of asphalt and maleic anhydride: Kinetics and mechanism , 2010 .

[50]  Mahyar Arabani,et al.  The effect of waste tire thread mesh on the dynamic behaviour of asphalt mixtures , 2010 .

[51]  Rahul Singh,et al.  Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products—A world prospective , 2010 .

[52]  Feng Zhang,et al.  The research for high-performance SBR compound modified asphalt , 2010 .

[53]  T. K. Chaki,et al.  Effect of waste plastic as modifier on thermal stability and degradation kinetics of bitumen/waste plastics blend , 2010 .

[54]  Xianming Shi,et al.  Effect of deicing solutions on the tensile strength of micro- or nano-modified asphalt mixture , 2011 .

[55]  T. Yiqiu,et al.  Starch as a modifier for asphalt paving materials , 2011 .

[56]  Payam Shafigh,et al.  Using waste plastic bottles as additive for stone mastic asphalt , 2011 .

[57]  Al-Hadidy Ai,et al.  Laboratory evaluation of HMA with high density polyethylene as a modifier , 2011 .

[58]  A. K. Panda,et al.  A review on tertiary recycling of high-density polyethylene to fuel. , 2011 .

[59]  R. Vasudevan,et al.  A technique to dispose waste plastics in an ecofriendly way – Application in construction of flexible pavements , 2012 .