Ultimate strength value of stiffened panel designs under initial displacement and applied pressure: FE analysis vs. IACS-CSR

[1]  R. Adiputra,et al.  Reliability-based assessment of ship hull girder ultimate strength , 2023, Curved and Layered Structures.

[2]  NguyenCong Dang Khoa,et al.  Residual ultimate strength assessment of submarine pressure hull under dynamic ship collision , 2022, Ocean Engineering.

[3]  Fajar Budi Laksono,et al.  Design of the Bengawan Unmanned Vehicle (UV) Roboboat: Mandakini Neo , 2022, Mekanika: Majalah Ilmiah Mekanika.

[4]  A. Prabowo,et al.  Forecasting the Effects of Failure Criteria in Assessing Ship Structural Damage Modes , 2022, Civil Engineering Journal.

[5]  A. Prabowo,et al.  On the Resistance to Buckling Loads of Idealized Hull Structures: FE Analysis on Designed-Stiffened Plates , 2022, Designs.

[6]  Fajar Budi Laksono,et al.  Investigation of Honeycomb Sandwich Panel Structure using Aluminum Alloy (AL6XN) Material under Blast Loading , 2022, Civil Engineering Journal.

[7]  A. Prabowo,et al.  Assessment of ship structure under fatigue loading: FE benchmarking and extended performance analysis , 2022, Curved and Layered Structures.

[8]  Fajar Budi Laksono,et al.  Assessment of ballistic impact damage on aluminum and magnesium alloys against high velocity bullets by dynamic FE simulations , 2022, Journal of the Mechanical Behavior of Materials.

[9]  Aditya Rio Prabowo,et al.  Structural Resistance of Simplified Side Hull Models Accounting for Stiffener Design and Loading Type , 2021, Mathematical Problems in Engineering.

[10]  Tomasz Cepowski,et al.  The Use of Artificial Neural Networks to Determine the Engine Power and Fuel Consumption of Modern Bulk Carriers, Tankers and Container Ships , 2021, Energies.

[11]  Carlos Graciano,et al.  Optimal design of longitudinal stiffeners of unsymmetric plate girders subjected to pure bending , 2021 .

[12]  Aknaf Sam Dabit,et al.  Perancangan Kapal Tanpa Awak Penebar Pakan Ikan di Wilayah Pesisir Pantai Berbasis Microcontroller Arduino , 2020 .

[13]  H. Ren,et al.  Numerical Investigation of Ultimate Strength of Stiffened Plates With Various Cross-Section Forms , 2018, Volume 3: Structures, Safety, and Reliability.

[14]  Joško Parunov,et al.  Residual ultimate strength assessment of double hull oil tanker after collision , 2017 .

[15]  C. Guedes Soares,et al.  Influence of geometric imperfections on the ultimate strength of the double bottom of a Suezmax tanker , 2016 .

[16]  C. Guedes Soares,et al.  Hull girder ultimate strength assessment based on experimental results and the dimensional theory , 2015 .

[17]  Ahmed Elhanafi,et al.  Ship structural integrity using new stiffened plates , 2015 .

[18]  Sherif A. Ibrahim,et al.  Lateral torsional buckling strength of unsymmetrical plate girders with corrugated webs , 2014 .

[19]  Jeom Kee Paik,et al.  Safety guidelines of ultimate hull girder strength for grounded container ships , 2013 .

[20]  Vedran Žanić,et al.  The Global Structural Response Model for Multi-deck Ships in Concept Design Phase , 2010 .

[21]  Torgeir Moan,et al.  Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition, Part 2: Stress distribution in the double bottom and simplified approaches , 2009 .

[22]  M. Fujikubo,et al.  Ultimate strength of container ships subjected to combined hogging moment and bottom local loads part 1: Nonlinear finite element analysis , 2020 .

[23]  Jeom Kee Paik,et al.  Ultimate strength formulations for stiffened panels under combined axial load, in-plane bending and lateral pressure: a benchmark study , 2002 .