Analysis of morphing, multi stable structures actuated by piezoelectric patches

In this article a novel morphing structure concept is studied using non-linear Finite Element Analysis (FEA). Bi-stable asymmetrical laminates can be snapped between two geometries through a buckling mechanism that is activated by an applied load. A piezoelectric Macro-Fibre Composite (MFC) actuator was chosen to provide this activation load. Bi-stable structures will maintain a given geometrical state without the need for a constant actuation force. FEA was used to predict the two stable geometries, to understand the buckling mechanism and to evaluate the feasibility of using MFC actuators for switching between states. Environmental effects like moisture absorption were also included in the analysis.

[1]  Sridhar Kota,et al.  Design of Compliant Mechanisms for Morphing Structural Shapes , 2003 .

[2]  Mary Frecker,et al.  Aircraft Structural Morphing Using Tendon-Actuated Compliant Cellular Trusses , 2005 .

[3]  Michael R Wisnom,et al.  Loss of bifurcation and multiple shapes of thin [0/90] unsymmetric composite plates subject to thermal stress , 2004 .

[4]  M. Schultz,et al.  USE OF PIEZOELECTRIC ACTUATORS TO EFFECT SNAP-THROUGH BEHAVIOR OF UNSYMMETRIC COMPOSITE LAMINATES , 2003 .

[5]  Paul M. Weaver,et al.  Phenomena in the bifurcation of unsymmetric composite plates , 2007 .

[6]  David B. Domzalski,et al.  Development of a piezoelectric actuator for trailing edge flap control of full scale rotor blades , 2001 .

[7]  W. Keats Wilkie,et al.  An overview of composite actuators with piezoceramic fibers , 2002 .

[8]  Michael W. Hyer,et al.  SMA-induced snap-through of unsymmetric fiber-reinforced composite laminates , 2003 .

[9]  George S. Springer,et al.  Environmental effects on composite materials , 1981 .

[10]  Michael W. Hyer,et al.  Advanced calculation of the room-temperature shapes of thin unsymmetric composite laminates , 1995 .

[11]  Michael W. Hyer,et al.  Thermally-induced deformation behavior of unsymmetric laminates , 1998 .

[12]  Diann Brei,et al.  Piezoceramic hollow fiber active composites , 2002 .

[13]  Werner Hufenbach,et al.  Analysis and optimisation of multistable composites under residual stresses , 2002 .

[14]  Jayanth N. Kudva,et al.  Morphing aircraft concepts, classifications, and challenges , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[15]  R. B. Williams,et al.  Nonlinear Tensile and Shear Behavior of Macro Fiber Composite Actuators , 2004 .

[16]  Michael W. Hyer,et al.  A Morphing Concept Based on Unsymmetric Composite Laminates and Piezoceramic MFC Actuators , 2004 .

[17]  Lothar Kroll,et al.  Design of multistable composites for application in adaptive structures , 2002 .

[18]  Anna-Maria Rivas McGowan,et al.  The Aircraft Morphing Program , 1998 .

[19]  Carl T. Herakovich,et al.  Mechanics of Fibrous Composites , 1997 .

[20]  Michael R Wisnom,et al.  Development of curvature during the cure of AS4/8552 [0/90] unsymmetric composite plates , 2003 .

[21]  Friedrich K Straub,et al.  A feasibility study of using smart materials for rotor control , 1993 .

[22]  Christopher Niezrecki,et al.  Piezoelectric actuation: State of the art , 2001 .