Study of the bucket design effect on the turbulent flow around unconventional Savonius wind rotors

In this paper, numerical investigations were carried out to study the bucket design effect on the turbulent flow around unconventional Savonius wind rotors. The numerical model is based on the resolution of the Navier–Stokes equations in conjunction with the standard k-e turbulence model. These equations were solved by a finite volume discretization method. The software “Solidworks Flow simulation” has been used to characterise the flow characteristics in different transverse and longitudinal planes. Experimental results are conducted on an open wind tunnel equipped by an incurved Savonius wind rotor. The good agreement between numerical and experimental results confirms the validity of the numerical method.

[1]  W. Jones,et al.  The prediction of laminarization with a two-equation model of turbulence , 1972 .

[2]  Zied Driss,et al.  Numerical investigation of turbulent flow generated in baffled stirred vessels equipped with three different turbines in one and two-stage system , 2011 .

[3]  Zied Driss,et al.  Numerical simulation and experimental validation of the turbulent flow around a small incurved Savonius wind rotor , 2014 .

[4]  João Vicente Akwa,et al.  Discussion on the verification of the overlap ratio influence on performance coefficients of a Savonius wind rotor using computational fluid dynamics , 2012 .

[5]  S. V. Prabhu,et al.  Influence of the deflector plate on the performance of modified Savonius water turbine , 2011 .

[6]  B. Launder,et al.  Lectures in mathematical models of turbulence , 1972 .

[7]  S. J. Savonius,et al.  The S-rotor and its applications , 1931 .

[8]  David Hyman Gordon,et al.  Renewable Energy Resources , 1986 .

[9]  João Vicente Akwa,et al.  A review on the performance of Savonius wind turbines , 2012 .

[10]  Gábor Janiga,et al.  Optimization of Savonius turbines using an obstacle shielding the returning blade , 2010 .

[11]  Yasushi Takeda,et al.  Interactive flow field around two Savonius turbines , 2011 .

[12]  M. A. Kamoji,et al.  Performance tests on helical Savonius rotors , 2009 .

[13]  T. K. Aldos,et al.  Savonius rotor using swinging blades as an augmentation system , 1984 .

[14]  Zied Driss,et al.  Computational studies of the pitched blade turbines design effect on the stirred tank flow characteristics , 2010 .

[15]  Zied Driss,et al.  Experimental investigation of helical Savonius rotor with a twist of 180 , 2013 .

[16]  Damodar Maity,et al.  Optimum design configuration of Savonius rotor through wind tunnel experiments , 2008 .

[17]  R. Ricci,et al.  Unsteady Aerodynamics of a Savonius wind rotor: a new computational approach for the simulation of energy performance , 2010 .

[18]  Kunio Irabu,et al.  Characteristics of wind power on Savonius rotor using a guide-box tunnel , 2007 .

[19]  Ujjwal K. Saha,et al.  On the performance analysis of Savonius rotor with twisted blades , 2006 .