Self-balancing control strategy for a battery based H-bridge multilevel inverter

This paper presents a novel control strategy for isolated multilevel inverters. This converter has been chosen due to the autonomy of each full bridge. Other advantage is the feasibility of handling the power by cell when there are changes in the batteries state of charge (SOC). In order to take advantage of these benefits, a control strategy has been developed. The main goal of the proposed solution is to change the power produced by each inverter in function of SOC, guaranteeing a proper regulation of the overall power, without affecting the parameters of quality of the output voltage like harmonic distortion and amplitude. The designed solution was tested by power sources variations, finding the control strategy appropriate to accomplish the objective, to modify the power produced by each full bridge in function of SOC without changing overall power of the system and keeping the output voltage constant.

[1]  Mariusz Malinowski,et al.  A Survey on Cascaded Multilevel Inverters , 2010, IEEE Transactions on Industrial Electronics.

[2]  G. Sciutto,et al.  A new multilevel PWM method: a theoretical analysis , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[3]  Alex Q. Huang,et al.  A High Step-Up Three-Port DC–DC Converter for Stand-Alone PV/Battery Power Systems , 2013, IEEE Transactions on Power Electronics.

[4]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[5]  H. Farhangi,et al.  The path of the smart grid , 2010, IEEE Power and Energy Magazine.

[6]  Marco Liserre,et al.  A passivity-based multilevel active rectifier with adaptive compensation for traction applications , 2003 .

[7]  Samir Kouro,et al.  Reduced Switching-Frequency-Modulation Algorithm for High-Power Multilevel Inverters , 2007, IEEE Transactions on Industrial Electronics.

[8]  Sergio Busquets-Monge,et al.  Interfacing Renewable Energy Sources to the Utility Grid Using a Three-Level Inverter , 2006, IEEE Transactions on Industrial Electronics.

[9]  Jan T. Bialasiewicz,et al.  Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey , 2006, IEEE Transactions on Industrial Electronics.

[10]  M. Marchesoni,et al.  A non conventional power converter for plasma stabilization , 1988, PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference.

[11]  Vassilios G. Agelidis,et al.  A multilevel PWM inverter topology for photovoltaic applications , 1997, ISIE '97 Proceeding of the IEEE International Symposium on Industrial Electronics.

[12]  Brendan Peter McGrath,et al.  Multicarrier PWM strategies for multilevel inverters , 2002, IEEE Trans. Ind. Electron..

[13]  Hembram Mansing A Cascaded Inverter For Transformerless Single Phase Grid Connected Photovoltaic Systems , 2013 .

[14]  Lennart Söder,et al.  Distributed generation : a definition , 2001 .

[15]  K.A. Corzine,et al.  Overdistention operation of cascaded multilevel inverters , 2006, IEEE Transactions on Industry Applications.

[16]  Jin Jiang,et al.  Control strategy for a standalone PV/battery hybrid system , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[17]  Thierry Meynard,et al.  Multi-Level Choppers for High Voltage Applications , 1992 .

[18]  D. Sauer,et al.  Operation conditions of batteries in PV applications , 2004 .

[19]  Jeyraj Selvaraj,et al.  Multilevel Inverter For Grid-Connected PV System Employing Digital PI Controller , 2009, IEEE Transactions on Industrial Electronics.

[20]  Ali Malek,et al.  Modeling of Lead Acid Batteries in PV Systems , 2012 .