D-band 3.6-dB-insertion-loss ASK modulator with 19.5-dB isolation in 65-nm CMOS technology

A compact and low-insertion-loss amplitude-shifted keying (ASK) modulator suitable for operations in D-band (110 GHz – 170 GHz) has been designed and successfully integrated with a 65-nm CMOS technology. The structure of the modulator is a transmission-line type single-pole-single-throw (SPST) switch. To minimize the insertion loss, a single section of a transmission line is used with two shunt transistors. The modulator exhibits an insertion loss of lower than 3.6 dB, measured without de-embedding, and an isolation of higher than 19.5 dB in the D band. The transient behavior of the modulator has been characterized by using a pulse generator, revealing an operation suitable for over-1Gbps applications.

[1]  Minoru Fujishima,et al.  1Gbps/ch 60GHz CMOS multichannel millimeter-wave repeater , 2010, 2010 Symposium on VLSI Circuits.

[2]  T. Kosugi,et al.  MM-wave long-range wireless systems , 2009, IEEE Microwave Magazine.

[3]  A. Tomkins,et al.  A 94GHz SPST Switch in 65nm Bulk CMOS , 2008, 2008 IEEE Compound Semiconductor Integrated Circuits Symposium.

[4]  P. Chevalier,et al.  A 140-GHz double-sideband transceiver with amplitude and frequency modulation operating over a few meters , 2009, 2009 IEEE Bipolar/BiCMOS Circuits and Technology Meeting.

[5]  Hong-Yeh Chang,et al.  DC-to-135 GHz and 15-to-135 GHz SPDT traveling wave switches using FET-integrated CPW line structure , 2005, IEEE MTT-S International Microwave Symposium Digest, 2005..

[6]  M. Fujishima,et al.  8Gbps CMOS ASK modulator for 60GHz wireless communication , 2008, 2008 IEEE Asian Solid-State Circuits Conference.