Modified Nafion 117 as an Improved Polymer Electrolyte Membrane for Direct Methanol Fuel Cells

Modification of the surface structure of the commercial ion exchange membrane Nafion®1 17, by low dose electron beam (EB) exposure, to produce an improved polymer electrolyte membrane for direct methanol fuel cells (DMFC) is described. Nation 117 film was exposed to low dose EB irradiations at an accelerating voltage of 35 kV. Subsequently the properties of the film itself, in terms of conductance, methanol permeability, percentage water uptake and shrinkage, together with the performance of its membrane electrode assembly in the DMFC were analyzed and contrasted with the untreated material. Low-dose EB treatment is shown to be effective in the reduction of methanol crossover, 600 μC/cm 2 exposure reducing crossover to 7% of that of the parent material. In terms of overall DMFC performance (maximum power output). improvements of up to 51% are reported in comparison to the use of untreated Nafion 117. A simple analytical protocol, allowing film properties to he directly related to subsequent DMFC performance, is also reported. IR reflectance (attenuated total reflectance) spectroscopy was used to study film surface composition and determine the effect of low-dose EB exposure on Nafion 117 structure. These observations are contrasted with previous findings using traditional EB systems.

[1]  P. Pickup,et al.  Modification of Nafion Proton Exchange Membranes to Reduce Methanol Crossover in PEM Fuel Cells , 1999 .

[2]  C. Heitner-Wirguin,et al.  Infra-red spectra of perfluorinated cation-exchanged membranes , 1979 .

[3]  J. Wainright,et al.  AC impedance investigations of proton conduction in Nafion(sup TM) , 1993 .

[4]  D. Jung,et al.  Performance of a direct methanol polymer electrolyte fuel cell , 1998 .

[5]  F. C. Wilson,et al.  The morphology in nafion† perfluorinated membrane products, as determined by wide- and small-angle x-ray studies , 1981 .

[6]  M. Kaiser,et al.  Proton-conducting polymers with reduced methanol permeation , 1999 .

[7]  J. Kosek,et al.  Recent advances in PEM liquid-feed direct methanol fuel cells , 1996, Proceedings of 11th Annual Battery Conference on Applications and Advances.

[8]  Shimshon Gottesfeld,et al.  Determination of water diffusion coefficients in perfluorosulfonate ionomeric membranes , 1991 .

[9]  Jesse S. Wainright,et al.  Acid-doped polybenzimidazoles : a new polymer electrolyte , 1995 .

[10]  V. Tricoli.  Proton and Methanol Transport in Poly(perfluorosulfonate) Membranes Containing Cs + and H + Cations , 1998 .

[11]  Wenhua Huang,et al.  A Methanol Impermeable Proton Conducting Composite Electrolyte System , 1995 .

[12]  Angelika Heinzel,et al.  A review of the state-of-the-art of the methanol crossover in direct methanol fuel cells , 1999 .

[13]  H. Yeager,et al.  Exchange rates and water content of a cation exchange membrane in aprotic solvents , 1976 .

[14]  Shimshon Gottesfeld,et al.  High performance direct methanol polymer electrolyte fuel cells , 1996 .

[15]  H. Yeager,et al.  Perfluorinated Ionomer Membranes , 1982 .

[16]  B. Pivovar,et al.  Pervaporation membranes in direct methanol fuel cells , 1999 .

[17]  Kai Sundmacher,et al.  Limiting current behaviour of the direct methanol fuel cell , 1999 .

[18]  P. Gibson,et al.  Solubility and transport behavior of water and alcohols in Nafion , 2001 .