Graphene Nanoplatelets as Novel Reinforcement Filler in Poly(lactic acid)/Epoxidized Palm Oil Green Nanocomposites: Mechanical Properties

Graphene nanoplatelet (xGnP) was investigated as a novel reinforcement filler in mechanical properties for poly(lactic acid) (PLA)/epoxidized palm oil (EPO) blend. PLA/EPO/xGnP green nanocomposites were successfully prepared by melt blending method. PLA/EPO reinforced with xGnP resulted in an increase of up to 26.5% and 60.6% in the tensile strength and elongation at break of the nanocomposites respectively, compared to PLA/EPO blend. XRD pattern showed the presence of peak around 26.5° in PLA/EPO nanocomposites which corresponds to characteristic peak of graphene nanoplatelets. However, incorporation of xGnP has no effect on the flexural strength and modulus. Impact strength of PLA/5 wt% EPO improved by 73.6% with the presence of 0.5 wt% xGnP loading. Mechanical properties of PLA were greatly improved by the addition of a small amount of graphene nanoplatelets (<1 wt%).

[1]  Dajun Chen,et al.  Enhanced Mechanical Properties of Graphene-Based Poly(vinyl alcohol) Composites , 2010 .

[2]  Rahul K Gupta,et al.  An Investigation of Melt Rheology and Thermal Stability of Poly(lactic acid)/ Poly(butylene succinate) Nanocomposites , 2009 .

[3]  Liping Zhao,et al.  Fabrication of exfoliated graphene-based polypropylene nanocomposites with enhanced mechanical and thermal properties , 2011 .

[4]  Fernão D. Magalhães,et al.  Effect of incorporation of graphene oxide and graphene nanoplatelets on mechanical and gas permeability properties of poly(lactic acid) films , 2013 .

[5]  R. Verdejo,et al.  Graphene filled polymer nanocomposites , 2011 .

[6]  I. Daniel,et al.  Processing of expanded graphite reinforced polymer nanocomposites , 2006 .

[7]  R. Ruoff,et al.  Graphene-based polymer nanocomposites , 2011 .

[8]  Tzong‐Ming Wu,et al.  Synthesis and characterization of biodegradable poly(l-lactide)/layered double hydroxide nanocomposites , 2010 .

[9]  C. Macosko,et al.  Graphene/Polymer Nanocomposites , 2010 .

[10]  Yu Jiugao,et al.  Study of the Properties of Plasticised Poly(Lactic Acid) with Poly(1,3-Butylene Adipate) , 2008 .

[11]  J. López,et al.  Optimization of the curing conditions of PVC plastisols based on the use of an epoxidized fatty acid ester plasticizer , 2009 .

[12]  V. Causin,et al.  Morphological and structural characterization of polypropylene/conductive graphite nanocomposites , 2006 .

[13]  N. Ibrahim,et al.  A Comparative Study on the Mechanical, Thermal and Morphological Characterization of Poly(lactic acid)/Epoxidized Palm Oil Blend , 2012, International journal of molecular sciences.

[14]  Y. Jeong,et al.  Effects of grafted chain length on mechanical and electrical properties of nanocomposites containing polylactide-grafted carbon nanotubes , 2010 .

[15]  Ayse Aytac,et al.  Plasticized and unplasticized PLA/organoclay nanocomposites: Short- and long-term thermal properties, morphology, and nonisothermal crystallization behavior , 2012 .

[16]  Haihui Wang,et al.  Large reversible capacity of high quality graphene sheets as an anode material for lithium-ion batteries , 2010 .

[17]  F. Mantia,et al.  Green composites: A brief review , 2011 .

[18]  L. Drzal,et al.  Multifunctional high density polyethylene nanocomposites produced by incorporation of exfoliated graphite nanoplatelets 1: Morphology and mechanical properties , 2010 .

[19]  H. Yano,et al.  The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites , 2009 .

[20]  Simona Bronco,et al.  Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing , 2009 .

[21]  P. Dubois,et al.  Plasticization of poly(lactide) with blends of tributyl citrate and low molecular weight poly(d,l-lactide)-b-poly(ethylene glycol) copolymers , 2009 .

[22]  Chin-San Wu,et al.  Study on the preparation and characterization of biodegradable polylactide/multi-walled carbon nanotubes nanocomposites , 2007 .

[23]  M. Jonoobi,et al.  Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion , 2010 .

[24]  D. Colombini,et al.  Plasticization of poly(lactic acid) with oligomeric malonate esteramides: Dynamic mechanical and thermal film properties , 2005 .

[25]  S. Bose,et al.  Recent advances in graphene based polymer composites , 2010 .

[26]  J. L. Willett,et al.  Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy , 2008 .

[27]  L. Drzal,et al.  Mechanical properties and morphological characterization of exfoliated graphite–polypropylene nanocomposites , 2007 .

[28]  SUPARNA DUTTASINHA,et al.  Graphene: Status and Prospects , 2009, Science.

[29]  Jiachun Feng,et al.  Preparation of organically dispersible graphene nanosheet powders through a lyophilization method and their poly(lactic acid) composites , 2010 .