A spatially resolved fuel cell stack model with gas–liquid slip phenomena for cold start simulations

[1]  Takemi Chikahisa,et al.  Ice Formation Processes in PEM Fuel Cell Catalyst Layers during Cold Startup Analyzed by Cryo-SEM , 2016 .

[2]  Tian Tang,et al.  Analyse der Energieeffizienz eines Brennstoffzellenstapels im Kaltstartbetrieb , 2016 .

[3]  Michael Bargende,et al.  Zukunft der Motorprozessrechnung Und 1D-Simulation , 2014, MTZ - Motortechnische Zeitschrift.

[4]  Hyunchul Ju,et al.  Large-scale cold start simulations for automotive fuel cells , 2014, 2014 5th International Renewable Energy Congress (IREC).

[5]  C. Schultze,et al.  Contribution to Numerically Efficient Modelling of Thermodynamic SystemsA , 2013 .

[6]  Cesare Pianese,et al.  Experimental validation of a lumped model of single droplet deformation, oscillation and detachment on the GDL surface of a PEM fuel cell , 2013 .

[7]  Qian Guo,et al.  Modeling of assisted cold start processes with anode catalytic hydrogen–oxygen reaction in proton exchange membrane fuel cell , 2013 .

[8]  Nils Brandau,et al.  Analyse zur Zellinternen Befeuchtung eines Polymerelektrolytmembran-Brennstoffzellenstapels , 2012 .

[9]  Takemi Chikahisa,et al.  Cold start characteristics and freezing mechanism dependence on start-up temperature in a polymer electrolyte membrane fuel cell , 2012 .

[10]  Yoshiaki Naganuma,et al.  Development of System Control for Rapid Warm-up Operation of Fuel Cell , 2012 .

[11]  C. Rea.  Degradation of a Polymer Electrolyte Membrane Fuel Cell Under Freeze Start-up Operation , 2011 .

[12]  D. Wilkinson,et al.  Gas–liquid two-phase flow behavior in minichannels bounded with a permeable wall , 2011 .

[13]  Achim Kienle,et al.  A Model for the Freeze Start Behavior of a PEM Fuel Cell Stack , 2011 .

[14]  Xianguo Li,et al.  Water transport in polymer electrolyte membrane fuel cells , 2011 .

[15]  Wilhelm Tegethoff,et al.  Modelling of heat pumps with an object-oriented model library for thermodynamic systems , 2010 .

[16]  Cesare Pianese,et al.  Experimental investigation of water droplet–air flow interaction in a non-reacting PEM fuel cell channel , 2010 .

[17]  Guido Bender,et al.  Model Library of Polymer Electrolyte Membrane Fuel Cells for System Hardware and Control Design , 2009 .

[18]  Xianguo Li,et al.  On the modeling of water transport in polymer electrolyte membrane fuel cells , 2009 .

[19]  Xianguo Li,et al.  Effects of various operating and initial conditions on cold start performance of polymer electrolyte membrane fuel cells , 2009 .

[20]  Dieter Brüggemann,et al.  Experimental investigation of parameters influencing the freeze start ability of a fuel cell system , 2009 .

[21]  Abdellatif Miraoui,et al.  Cell layer level generalized dynamic modeling of a PEMFC stack using VHDL-AMS language , 2009 .

[22]  Jürgen Stumper,et al.  Gas–liquid two-phase flow distributions in parallel channels for fuel cells , 2009 .

[23]  Henk Huisseune,et al.  Semi-empirical along-the-channel model for a proton exchange membrane fuel cell , 2008 .

[24]  Manish Khandelwal,et al.  Characteristic Behavior of Polymer Electrolyte Fuel Cell Resistance during Cold Start , 2008 .

[25]  C. Siegel.  Review of computational heat and mass transfer modeling in polymer-electrolyte-membrane (PEM) fuel cells , 2008 .

[26]  A. Vahidi,et al.  A review of the main parameters influencing long-term performance and durability of PEM fuel cells , 2008 .

[27]  Masahiro Shiozawa,et al.  Super-cooled water behavior inside polymer electrolyte fuel cell cross-section below freezing temperature , 2008 .

[28]  Suman Basu,et al.  Modeling two-phase flow in PEM fuel cell channels , 2008 .

[29]  Christoph Richter,et al.  Proposal of New Object-Oriented Equation-Based Model Libraries for Thermodynamic Systems , 2008 .

[30]  Fabien Harel,et al.  Experimental Studies on the Influence of Operational Parameters on the Cold Start of a 2 kW Fuel Cell , 2008 .

[31]  J. Benziger,et al.  Non-Fickian water vapor sorption dynamics by Nafion membranes. , 2008, The journal of physical chemistry. B.

[32]  K. Sharp,et al.  Validated Leverett Approach for Multiphase Flow in PEFC Diffusion Media I. Hydrophobicity Effect , 2007 .

[33]  K. Sharp,et al.  Validated Leverett Approach for Multiphase Flow in PEFC Diffusion Media II. Compression Effect , 2007 .

[34]  Chao-Yang Wang,et al.  Non-isothermal cold start of polymer electrolyte fuel cells , 2007 .

[35]  Manish Khandelwal,et al.  One-dimensional thermal model of cold-start in a polymer electrolyte fuel cell stack , 2007 .

[36]  J. Jorné,et al.  Cathode Catalyst Utilization for the ORR in a PEMFC Analytical Model and Experimental Validation , 2007 .

[37]  Chao-Yang Wang,et al.  Isothermal Cold Start of Polymer Electrolyte Fuel Cells , 2007 .

[38]  K. Sharp,et al.  Liquid droplet behavior and instability in a polymer electrolyte fuel cell flow channel , 2006 .

[39]  Song-Yul Choe,et al.  Modeling and simulation of a PEM fuel cell stack considering temperature effects , 2006 .

[40]  F. Philipps,et al.  Dynamic investigation of PEFC stacks in interaction with the air supply system , 2006 .

[41]  Dirk Riemann,et al.  Low temperature operation and influence parameters on the cold start ability of portable PEMFCs , 2006 .

[42]  Sebastián Dormido,et al.  FuelCellLib - A Modelica Library for Modeling of Fuel Cells , 2005 .

[43]  Chao-Yang Wang,et al.  Liquid Water Transport in Gas Diffusion Layer of Polymer Electrolyte Fuel Cells , 2004 .

[44]  Jin Hyun Nam,et al.  Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium , 2003 .

[45]  T. Hibiki,et al.  Some characteristics of air-water two-phase flow in small diameter vertical tubes , 1996 .

[46]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[47]  A. Esposito.  Numerical and Experimental Study of Droplet-Air Flow Interaction on the GDL Surface of PEMFC for Water Management Monitoring, Control and Diagnostics , 2010 .

[48]  Eva Schießwohl.  Entwicklung eines Kaltstartkonzeptes für ein Polymermembran-Brennstoffzellensystem im automobilen Einsatz , 2010 .

[49]  Manish Khandelwal,et al.  An integrated approach for modeling of water and thermal transport in a polymer electrolyte fuel cell and stack , 2009 .