Microstructure and performance of hybrid laser-arc welded 40 mm thick 316 L steel plates

[1]  Xiong Zhang,et al.  Effects of interlaminar microstructural inhomogeneity on mechanical properties and corrosion resistance of multi-layer fiber laser welded high strength low alloy steel , 2018 .

[2]  Xiaoyan Zeng,et al.  Microstructure and Mechanical Properties of Narrow Gap Laser-Arc Hybrid Welded 40 mm Thick Mild Steel , 2017, Materials.

[3]  Y. Abe,et al.  Development of narrow gap multi-layer welding process using oscillation laser beam , 2017 .

[4]  Junfeng Chen,et al.  Effect of precipitate state on the stress corrosion behavior of 7050 aluminum alloy , 2016 .

[5]  S. Jakobs,et al.  Modern hybrid welding process for structural steelwork engineering—Laser submerged arc hybrid welding , 2016 .

[6]  H. Jing,et al.  Effect of Welding Heat Input on the Corrosion Resistance of Carbon Steel Weld Metal , 2016, Journal of Materials Engineering and Performance.

[7]  Zhuo Li,et al.  Effect of heat input on cryogenic toughness of 316LN austenitic stainless steel NG-MAG welding joints with large thickness , 2015 .

[8]  M. Wahba,et al.  Hybrid welding with fiber laser and CO2 gas shielded arc , 2015 .

[9]  Xinyu Shao,et al.  A study of thick plate ultra-narrow-gap multi-pass multi-layer laser welding technology combined with laser cleaning , 2015 .

[10]  X. Shao,et al.  A study of narrow gap laser welding for thick plates using the multi-layer and multi-pass method , 2014 .

[11]  J. Mohammadi,et al.  Effect of Welding Current and Time on the Microstructure, Mechanical Characterizations, and Fracture Studies of Resistance Spot Welding Joints of AISI 316L Austenitic Stainless Steel , 2014, Metallurgical and Materials Transactions A.

[12]  Daqian Sun,et al.  Study on microstructures and mechanical properties of laser–arc hybrid welded S355J2W+N steel , 2014 .

[13]  P. M. Raole,et al.  Investigations of Microstructure and Mechanical Properties of 60-mm-Thick Type 316L Stainless Steel Welded Plates by Multipass Tungsten Inert Gas Welding and Electron Beam Welding for Fusion Reactor Applications , 2014 .

[14]  M. Rethmeier,et al.  Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel , 2014 .

[15]  Tao Liu,et al.  Microstructure and microhardness of fiber laser butt welded joint of stainless steel plates , 2013 .

[16]  L. M. Kukreja,et al.  Studies on pitting corrosion and sensitization in laser rapid manufactured specimens of type 316L stainless steel , 2012 .

[17]  Uwe Reisgen,et al.  Welding Thick Steel Plates with Fibre Lasers and GMAW , 2010 .

[18]  Todd Palmer,et al.  Problems and issues in laser-arc hybrid welding , 2009 .

[19]  I. El-Mahallawi,et al.  Correlation between the degree of sensitization and stress corrosion cracking susceptibility of type 304H stainless steel , 2009 .

[20]  G. Reddy,et al.  Microstructure and tensile properties of Inconel 718 pulsed Nd-YAG laser welds , 2005 .

[21]  W. Kurz,et al.  Solidification phase and microstructure selection maps for Fe-Cr-Ni alloys , 1999 .