Coupled CFD, radiation and porous media transport model for evaluating evaporative cooling in an urban environment

Abstract Urban heat islands affect the energy use for cooling in an urban environment, as well as human comfort and health. Water evaporation from moist surfaces could potentially reduce the local temperature in urban areas, a process known as evaporative cooling. This paper introduces a coupled model to study the effect of evaporative cooling on the temperature conditions in an urban street canyon. A computational model for determining convective heat and mass exchanges between the canyon walls and the air is proposed. The model couples three sub-models: (i) a Computational Fluid Dynamics (CFD) model, which solves heat and vapor transfer in the air, (ii) a Building Envelope Heat and Moisture (BE-HAM) transport model which solves heat and moisture transfer within the porous building walls and (iii) a radiation model (RAD) which determines the radiative heat exchange between the surfaces. An efficient coupling strategy has been developed and applied to investigate the drying of a wet windward wall of a street canyon. The effect of evaporation on the reduction of the surface and air temperatures in a street canyon is analyzed and the influence of these temperature reductions on the Physiological Equivalent Temperature (PET) is shown to be important.

[1]  P. Jones,et al.  Temperature decreases in an urban canyon due to green walls and green roofs in diverse climates , 2008 .

[2]  J. Carmeliet,et al.  Convective heat transfer coefficients for exterior building surfaces: Existing correlations and CFD modelling , 2011 .

[3]  S. Kato,et al.  Study on outdoor thermal environment of apartment block in Shenzhen, China with coupled simulation of convection, radiation and conduction , 2004 .

[4]  Gerald Mills,et al.  An urban canopy-layer climate model , 1997 .

[5]  H. Kondo,et al.  A Simple Single-Layer Urban Canopy Model For Atmospheric Models: Comparison With Multi-Layer And Slab Models , 2001 .

[6]  T. Stathopoulos,et al.  CFD simulation of the atmospheric boundary layer: wall function problems , 2007 .

[7]  E. Erell,et al.  Experimental studies on a novel roof pond configuration for the cooling of buildings , 2003 .

[8]  C. S. B. Grimmond,et al.  An urban canyon energy budget model and its application to urban storage heat flux modeling , 1998 .

[9]  Patricia A. O'Rourke,et al.  Simulating the causal elements of urban heat islands , 1980 .

[10]  Thijs Defraeye,et al.  Convective Heat and Mass Transfer at Exterior Building Surfaces (Convectief warmte- en massatransport op gebouwoppervlakken) , 2011 .

[11]  P. Höppe,et al.  The physiological equivalent temperature – a universal index for the biometeorological assessment of the thermal environment , 1999, International journal of biometeorology.

[12]  Dennis Y.C. Leung,et al.  Characteristics of air exchange in a street canyon with ground heating , 2006 .

[13]  J. Palyvos.  A survey of wind convection coefficient correlations for building envelope energy systems’ modeling , 2008 .

[14]  P. Richards,et al.  Appropriate boundary conditions for computational wind engineering models using the k-ε turbulence model , 1993 .

[15]  B. Gebhart.  Surface temperature calculations in radiant surroundings of arbitrary complexity—for gray, diffuse radiation , 1961 .

[16]  Jon Wieringa,et al.  Updating the Davenport roughness classification , 1992 .

[17]  Michael Schatzmann,et al.  Quality assurance and improvement of micro-scale meteorological models , 2011 .

[18]  Sandrine Anquetin,et al.  Pollutant dispersion and thermal effects in urban street canyons , 1996 .

[19]  Jörg Franke,et al.  The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: a summary , 2011 .

[20]  H. Mayer,et al.  Modelling radiation fluxes in simple and complex environments: basics of the RayMan model , 2007, International journal of biometeorology.

[21]  Jan Carmeliet,et al.  CONSERVATIVE MODELLING OF THE MOISTURE AND HEAT TRANSFER IN BUILDING COMPONENTS UNDER ATMOSPHERIC EXCITATION , 2007 .

[22]  Dominique Derome,et al.  High-resolution CFD simulations for forced convective heat transfer coefficients at the facade of a low-rise building , 2009 .

[23]  Bje Bert Blocken,et al.  A combined CFD–HAM approach for wind-driven rain on building facades , 2007 .

[24]  Jan Carmeliet,et al.  CFD analysis of convective heat transfer at the surfaces of a cube immersed in a turbulent boundary layer , 2010 .

[25]  Bert Blocken,et al.  CFD evaluation of wind speed conditions in passages between parallel buildings : effect of wall-function roughness modifications for the atmospheric boundary layer flow , 2007 .

[26]  Aya Hagishima,et al.  A Simple Energy Balance Model for Regular Building Arrays , 2005 .

[27]  M. S. Sodha,et al.  A review—Cooling by water evaporation over roof , 1982 .

[28]  David Pearlmutter,et al.  The effect of urban evaporation on building energy demand in an arid environment , 2008 .

[29]  A. Colburn,et al.  Mass Transfer (Absorption) Coefficients Prediction from Data on Heat Transfer and Fluid Friction , 1934 .

[30]  Nathan Mendes,et al.  New external convective heat transfer coefficient correlations for isolated low-rise buildings , 2007 .

[31]  Chun-Ho Liu,et al.  Large-Eddy Simulation of Flow and Scalar Transport in a Modeled Street Canyon , 2002 .