Electromagnetic superposed forming of large-scale one-dimensional curved AA2524-T3 sheet specimen

[1]  S. Reese,et al.  Experimental and numerical investigation of increased formability in combined quasi-static and high-speed forming processes , 2016 .

[2]  D. Green,et al.  Comparison of quasi-static and electrohydraulic free forming limits for DP600 and AA5182 sheets , 2016 .

[3]  Min Wan,et al.  A novel forming method of aluminum sheet based on superposition principle of electromagnetic local forming , 2016 .

[4]  Jianhua Mo,et al.  Investigation of large sheet deformation process in electromagnetic incremental forming , 2015 .

[5]  K. Dutta,et al.  Influence of Heat Treatment on Ratcheting Fatigue Behavior and Post Ratcheting Tensile Properties of Commercial Aluminum , 2015, Transactions of the Indian Institute of Metals.

[6]  Jeong Kim,et al.  Two-step electromagnetic forming process using spiral forming coils to deform sheet metal in a middle-block die , 2015 .

[7]  Kai Zhong,et al.  Electromagnetic incremental forming (EMIF): A novel aluminum alloy sheet and tube forming technology , 2014 .

[8]  Haiyang Zhou,et al.  Formability of Ti–6Al–4V titanium alloy sheet in magnetic pulse bulging , 2013 .

[9]  Haiping Yu,et al.  Formability of AZ31 magnesium alloy sheets during magnetic pulse bulging , 2013 .

[10]  Jun Li,et al.  Strengthening behavior of Nb in the modified Nimonic 80A , 2013 .

[11]  Glenn S. Daehn,et al.  Shape calibration of high strength metal sheets by electromagnetic forming , 2013 .

[12]  B. Kinsey,et al.  Effect of specimen planar area on electromagnetic flanging , 2013 .

[13]  Yang Fang,et al.  3D Numerical simulation method of electromagnetic forming for low conductive metals with a driver , 2013 .

[14]  K. Ray,et al.  Ratcheting phenomenon and post-ratcheting tensile behaviour of an aluminum alloy , 2012 .

[15]  A. Tekkaya,et al.  Electromagnetic forming—A review , 2011 .

[16]  Henri Champliaud,et al.  Three-stage process for improving roll bending quality , 2011, Simul. Model. Pract. Theory.

[17]  Martin Lévesque,et al.  Experimental study of shot peening and stress peen forming , 2010 .

[18]  Magnus Langseth,et al.  Stress–strain behaviour of aluminium alloys at a wide range of strain rates , 2009 .

[19]  Michael J. Worswick,et al.  Effects of strain rate on mechanical properties and failure mechanism of structural Al–Mg alloys , 2008 .

[20]  Sergey Fedorovich Golovashchenko,et al.  Material Formability and Coil Design in Electromagnetic Forming , 2007 .

[21]  Glenn S. Daehn,et al.  Formability of steel sheet in high velocity impact , 2005 .

[22]  D. A. Oliveira,et al.  Numerical Study of Damage Evolution and Failure in an Electromagnetic Corner Fill Operation , 2004 .

[23]  Ming Zhe Li,et al.  Multi-point forming technology for sheet metal , 2002 .

[24]  G. Venizelos,et al.  High strain rate properties of selected aluminium alloys , 2000 .

[25]  Glenn S. Daehn,et al.  Modeling of electromagnetically formed sheet metal , 1998 .

[26]  Glenn S. Daehn,et al.  Increased ductility in high velocity electromagnetic ring expansion , 1996 .

[27]  Glenn S. Daehn,et al.  Effect of velocity on flow localization in tension , 1996 .

[28]  Glenn S. Daehn,et al.  Hyperplasticity: Increased forming limits at high workpiece velocity , 1994 .

[29]  Masana Kato,et al.  High-Speed Forming of Metal Sheets by Electromagnetic Force , 1988 .

[30]  J. N. Johnson,et al.  Theoretical study of the dynamic tensile test , 1986 .

[31]  A. Rajendran,et al.  Inertia Effects on the Ductile Failure of Thin Rings , 1982 .

[32]  Min Zhang,et al.  Press Bend Forming Analysis Based on DTPMS for Butt Joints on Aircraft Panels , 2016 .

[33]  Mingzhe Li,et al.  Finite Element Simulation of Multi-gripper Flexible Stretch Forming , 2014 .

[34]  Taylan Altan,et al.  Testing and modelling of material behaviour and formability in sheet metal forming , 2014 .

[35]  T. N. Windholtz.  Plane-Strain Formability of Sheet Metal at High Velocity , 2012 .

[36]  Trevor A. Dean,et al.  A review of the development of creep age forming: Experimentation, modelling and applications , 2011 .

[37]  Shun-Fa Hwang,et al.  Temperature effect on electromagnetic forming process by finite element analysis , 2011 .

[38]  G. Daehn,et al.  Electromagnetic Springback Reshaping , 2006 .

[39]  Jose Imbert Boyd.  Increased Formability and the Effects of the Tool/Sheet Interaction in Electromagnetic Forming of Aluminum Alloy Sheet , 2005 .

[40]  Sergey Fedorovich Golovashchenko,et al.  The Effect of Tool–Sheet Interaction on Damage Evolution in Electromagnetic Forming of Aluminum Alloy Sheet , 2005 .

[41]  Glenn S. Daehn,et al.  Hyperplastic Forming: Process Potential and Factors Affecting Formability , 1999 .

[42]  John J. Lewandowski,et al.  Effects of hydrostatic pressure on mechanical behaviour and deformation processing of materials , 1998 .

[43]  J. H. Hollomon,et al.  Effect of Strain Rate Upon Plastic Flow of Steel , 1944 .