Capacitive humidity sensor with a coplanar electrode structure based on anodised porous alumina film

A simple and new relative humidity (RH) capacitive sensor with a two-layer planar structure based on anodic aluminium oxide (AAO) film serving as a sensing layer has been fabricated. A pair of separated tantalum thin films under the AAO layer served as two coplanar electrodes. AAO film was fabricated by anodising deposited aluminium thin film in oxalic acid. The influence of the pore size and thickness of the AAO film, and the electrode spacing, on the performance of the sensor was investigated. The RH sensor with a thicker AAO film and narrower electrode spacing was more sensitive. By pore widening, the sensitivity of the sensor can be improved. The achieved average sensitivity as high as ~3.57 pF/RH% was obtained for sensors with an AAO layer of 2 μm thickness and 80 nm pore size. These results were explained using the partial capacitance method and parallel-serial model. In addition, under the humidity range of 20-80%, sensors with 70 nm pores had the highest sensitivity, which was interpreted in terms of effective permittivity and anion concentration. This study provides an easy method to fabricate high-performance humidity sensors with very simple structures for practical applications.

[1]  Hyunchul Park,et al.  Capacitive humidity sensor design based on anodic aluminum oxide , 2009 .

[2]  Craig A. Grimes,et al.  Room Temperature Ammonia and Humidity Sensing Using Highly Ordered Nanoporous Alumina Films , 2002 .

[3]  Vinod Kumar Khanna,et al.  Carrier-transfer mechanisms and Al2O3 sensors for low and high humidities , 1986 .

[4]  Chang Q. Sun,et al.  Estimating the extent of surface oxidation by measuring the porosity dependent dielectrics of oxygenated porous silicon [rapid communication] , 2005 .

[5]  Enrico Traversa,et al.  Ceramic sensors for humidity detection: the state-of-the-art and future developments , 1995 .

[6]  A. Ngan,et al.  Precise Control of Nanohoneycomb Ordering over Anodic Aluminum Oxide of Square Centimeter Areas , 2011 .

[7]  J. Mizsei,et al.  A simple humidity sensor with thin film porous alumina and integrated heating , 2010 .

[8]  W. Shen,et al.  High-performance humidity sensors based on high-field anodized porous alumina films , 2009, Nanotechnology.

[9]  O. Vendik,et al.  Modeling and calculation of the capacitance of a planar capacitor containing a ferroelectric thin film , 1999 .

[10]  Vinod Kumar Khanna,et al.  Ionic doping and inversion of the characteristic of thin film porous Al2O3 humidity sensor , 1998 .

[11]  P. Chu,et al.  Anodizing process of Al films on Si substrates for forming alumina templates with short-distance ordered 25 nm nanopores , 2005 .

[12]  Vincent K. S. Hsiao,et al.  Humidity sensing based on nanoporous polymeric photonic crystals , 2008 .

[13]  R. K. Nahar.  Study of the performance degradation of thin film aluminum oxide sensor at high humidity , 2000 .

[14]  W. S. Khokle,et al.  On the origin of the humidity-sensitive electrical properties of porous aluminium oxide (sensor application) , 1984 .