Low-temperature flow behaviour of vegetable oil-based lubricants

Abstract Low temperature performance is one of the main constraints concerning the use of vegetable oils as lubricants, more than mineral or synthetic oil-based lubricants. In this work, the low-temperature behaviour of a variety of vegetable oil basestocks for lubricating applications, as well as their blends with some viscosity improvers and pour point additives, was studied through pour point determinations, thermal analysis (DSC) and viscosity measurements at low temperature. The concentration of polyunsaturated fatty acids (PUFAs) was found a predominant parameter influencing the low-temperature properties of vegetable oil-based lubricants. The pour point depressant (PPD) additives used had a positive influence by lowering the pour point and increasing the low-temperature performance of the vegetable oils studied, which was found dependent on vegetable oil fatty acid composition. In this sense, the most striking result was shown by the sunflower (SO)/PPD blend, whose pour point temperature reached −36 °C in comparison to −18 °C for the neat oil. By contrast, the worst result was obtained for the high oleic sunflower oil (HOSO)/PPD blend (−21 °C) in comparison with HOSO (−18 °C). On the other hand, it was found that the ethyl cellulose (EC), used as viscosity modifier, induces a delay in HOSO crystallization, producing a similar effect than PPD tested, besides increasing the viscosity. However, the ethylene–vinyl acetate copolymer (EVA) induces an undesirable increase in HOSO viscosity at around 13 °C.

[1]  Brajendra Kumar Sharma,et al.  Development of a new oxidation stability test method for lubricating oils using high-pressure differential scanning calorimetry , 2003 .

[2]  J. Hutchinson,et al.  Measurement of the wax appearance temperatures of crude oils by temperature modulated differential scanning calorimetry , 2001 .

[3]  S. Erhan,et al.  Wax appearance temperatures of vegetable oils determined by differential scanning calorimetry: effect of triacylglycerol structure and its modification , 2002 .

[4]  Sevim Z. Erhan,et al.  Epoxidized soybean oil as a potential source of high-temperature lubricants , 2002 .

[5]  Sevim Z. Erhan,et al.  Lubricant basestocks from vegetable oils , 2000 .

[6]  A. Petsom,et al.  Synergistic and antagonistic effects on oxidation stability of antioxidants in a synthetic ester based oil , 2011 .

[7]  N S Battersby,et al.  The biodegradability and microbial toxicity testing of lubricants--some recommendations. , 2000, Chemosphere.

[8]  J. Toro‐Vázquez,et al.  Isothermal crystallization of tripalmitin in sesame oil , 1997 .

[9]  B. Sharma,et al.  Chemically functionalized vegetable oils , 2005 .

[10]  M. Bhasi,et al.  Analysis of the pour point of coconut oil as a lubricant base stock using differential scanning calorimetry , 2009 .

[11]  Sevim Z. Erhan,et al.  Oxidation and low temperature stability of vegetable oil-based lubricants , 2006 .

[12]  Hatice Mutlu,et al.  Castor oil as a renewable resource for the chemical industry , 2010 .

[13]  Sevim Z. Erhan,et al.  Depression of pour points of vegetable oils by blending with diluents used for biodegradable lubricants , 1999 .

[14]  L A Quinchia,et al.  Viscosity modification of high-oleic sunflower oil with polymeric additives for the design of new biolubricant formulations. , 2009, Environmental science & technology.

[15]  Witoon Prinyawiwatkul,et al.  Thermal properties and applications of the Arrhenius equation for evaluating viscosity and oxidation rates of unrefined pollock oil , 2008 .

[16]  H. Masjuki,et al.  Vegetable‐based biodegradable lubricating oil additives , 2003 .

[17]  E. Lucas,et al.  Poly(ethylene-co-vinyl acetate) (EVA) as wax inhibitor of a Brazilian crude oil: oil viscosity, pour point and phase behavior of organic solutions , 2001 .

[18]  Bharat P. Singh.  Industrial crops and uses , 2010 .

[19]  J. M. Franco,et al.  Viscosity modification of different vegetable oils with EVA copolymer for lubricant applications , 2010 .

[20]  M. Schneider,et al.  Plant-oil-based lubricants and hydraulic fluids , 2006 .

[21]  Wilfried J. Bartz,et al.  Lubricants and the environment , 1998 .

[22]  B. Sharma,et al.  Chemical modification of vegetable oils for lubricant applications , 2006 .

[23]  A. Campanella,et al.  Lubricants from chemically modified vegetable oils. , 2010, Bioresource technology.

[24]  C. Boshui,et al.  Effect of cold flow improvers on flow properties of soybean biodiesel , 2010 .