Robust rainwater harvesting: probabilistic tank sizing for climate change adaptation

Rainwater harvesting (RWH) systems are increasingly being implemented in buildings. It is common in the UK for simple RWH tank sizing methods to be utilised, and these do not consider future climate change. This paper describes the development of a tool, which integrates elements of basic and detailed sizing approaches from the British Standard for RWH, with the latest probabilistic UK Climate Projections data. The method was initially applied to the design of a university building in Cornwall, UK. The methodology utilises 3,000 equi-probable rainfall patterns for tank sizing for each time period. Results indicate that, to ensure that it is ‘likely’ that the same non-potable demand could be met in 2080 as in the present, a tank 112% larger would be required. This increases to a 225% over-sizing for a ‘very likely’ probability of meeting the same level of non-potable demand. The same RWH system design was then assessed for three further UK locations with different rainfall characteristics. From these assessments, a simplified method was developed to enable practitioners to size RWH system tanks for current and future climates. The method provides a new approach to meet present and future non-potable demands, while preventing excessive over-sizing of tanks.

[1]  Simon Tait,et al.  Whole life cost performance of domestic rainwater harvesting systems in the United Kingdom , 2011 .

[2]  Alan Fewkes,et al.  Simulating the performance of rainwater collection and reuse systems using behavioural models , 2000 .

[3]  L. E. Neumann,et al.  Errors in yield and overflow estimation in rainwate r tank cluster modeling , 2011 .

[4]  Guido Vaes,et al.  The effect of rainwater storage tanks on design storms , 2001 .

[5]  F A Memon,et al.  Performance of a large building rainwater harvesting system. , 2012, Water research.

[6]  S Ward,et al.  Harvested rainwater quality: the importance of appropriate design. , 2010, Water science and technology : a journal of the International Association on Water Pollution Research.

[7]  Carol Howe,et al.  Water Sensitive Cities , 2011 .

[8]  Glenis,et al.  UK Climate Projections science report: Projections of future daily climate for the UK from the Weather Generator , 2009 .

[9]  Eun-Sung Chung,et al.  Probabilistic estimation of the storage capacity of a rainwater harvesting system considering climate change , 2012 .

[10]  George Kuczera,et al.  Figtree Place: a case study in water sensitive urban development (WSUD) , 2000 .

[11]  Marjorie van Roon,et al.  Low Impact Urban Design and Development: Scope, Founding Principles and Collaborative Learning , 2006 .

[12]  Chun-Hung Lin,et al.  A probabilistic approach to rainwater harvesting systems design and evaluation , 2009 .

[13]  R.B.B. Kellagher.  Stormwater management using rainwater harvesting: testing the Kellagher/Gerolin methodology on a pilot study , 2012 .

[14]  A. Fewkes.  Modelling the performance of rainwater collection systems: towards a generalised approach , 2000 .

[15]  Matthew D. Collins,et al.  UK Climate Projections Science Report: Climate Change Projections , 2009 .

[16]  David Butler,et al.  Making asset investment decisions for wastewater systems that include sustainability , 2008 .

[17]  Alice Bows,et al.  Reframing the climate change challenge in light of post-2000 emission trends , 2008, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.