This paper presents an analysis of the “Performance-Based” seismic design method, in order to overcome the perceived disadvantages and limitations of the existing seismic design approach based on force, in engineering practice. Bearing in mind, the specificity of the earthquake as a load and the fact that the seismic resistance of the structures solely depends on its behaviour in the nonlinear field, traditional seismic design approach based on force and linear analysis is not adequate. “Performance-Based” seismic design method is based on nonlinear analysis and can be used in everyday engineering practice. This paper presents the application of this method to eight-story high reinforced concrete building with combined structural system (reinforced concrete frame structural system in one direction and reinforced concrete ductile wall system in other direction). The nonlinear time-history analysis is performed on the spatial model of the structure using program Perform 3D, where the structure is exposed to forty real earthquake records. For considered building, large number of results were obtained. It was concluded that using this method we could, with a high degree of reliability, evaluate structural behavior under earthquake. It is obtained significant differences in the response of structures to various earthquake records. Also analysis showed that frame structural system had not performed well at the effect of earthquake records on soil like sand and gravel, while a ductile wall system had a satisfactory behavior on different types of soils.
[1]
M. Moșoarcă,et al.
Failure analysis of RC shear walls with staggered openings under seismic loads
,
2014
.
[2]
S. Kramer.
Geotechnical Earthquake Engineering
,
1996
.
[3]
Jack P. Moehle,et al.
Nonlinear analysis for performance‐based earthquake engineering
,
2005
.
[4]
John W. Wallace,et al.
Yield displacement-based seismic design of RC wall buildings
,
2007
.
[5]
Gary C. Hart,et al.
The structural design of tall and special buildings
,
2005
.
[6]
C. Allin Cornell,et al.
Probabilistic seismic demand analysis of nonlinear structures
,
1999
.
[7]
Lin-Hai Han,et al.
Seismic behaviour of concrete-filled steel tubular frame to RC shear wall high-rise mixed structures
,
2009
.
[8]
Amr S. Elnashai,et al.
Probabilistic seismic performance assessment of code-compliant multi-story RC buildings
,
2012
.
[9]
Yogendra Singh,et al.
Identification of seismic failure modes of URM infilled RC frame buildings
,
2013
.