Effect of heat treatment on microstructure, corrosion, and shape memory characteristics of laser deposited NiTi alloy

The aim of this work is to study the effect of heat treatment on the microstructure, phase transformations, shape memory characteristics and corrosion behaviour of laser deposited equiatomic NiTi a ...

[1]  Amit Bandyopadhyay,et al.  Compression fatigue behavior of laser processed porous NiTi alloy. , 2012, Journal of the mechanical behavior of biomedical materials.

[2]  Fabian Meier,et al.  Damping of Selective-Laser-Melted NiTi for Medical Implants , 2014, Journal of Materials Engineering and Performance.

[3]  Weidong Huang,et al.  Microstructure evolution in laser solid forming of Ti–50 wt% Ni alloy , 2009 .

[4]  B Vamsi Krishna,et al.  Fabrication of porous NiTi shape memory alloy structures using laser engineered net shaping. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[5]  Yoshiyuki Nakata,et al.  Crystal Structure, Composition and Morphology of a Precipitate in an Aged Ti-51 at%Ni Shape Memory Alloy , 1986 .

[6]  Wenhui Wu,et al.  One-step shaping of NiTi biomaterial by selective laser melting , 2007, SPIE/COS Photonics Asia.

[7]  S. Shabalovskaya,et al.  Surface, corrosion and biocompatibility aspects of Nitinol as an implant material. , 2002, Bio-medical materials and engineering.

[8]  T. Antretter,et al.  Size effects on the martensitic phase transformation of NiTi nanograins , 2007 .

[9]  K. Yeung,et al.  Optimization of thermal treatment parameters to alter austenitic phase transition temperature of NiTi alloy for medical implant , 2004 .

[10]  Jonathan C. Y. Chung,et al.  Effects of heat treatment on characteristics of porous Ni-rich NiTi SMA prepared by SHS technique , 2006 .

[11]  P. Chu,et al.  Phase transformation behavior of porous NiTi alloys fabricated by capsule-free hot isostatic pressing , 2008 .

[12]  Amit Bandyopadhyay,et al.  Application of Laser Engineered Net Shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants , 2009, Journal of materials science. Materials in medicine.

[13]  Y. Liu,et al.  On the deformation of the twinned domain in Niti shape memory alloys , 2000 .

[14]  C. Wu,et al.  Effects of welding heat input on microstructure and hardness in heat-affected zone of HQ130 steel , 2001 .

[15]  K. Dai,et al.  Shape Memory Alloys and their Medical Application , 2004 .

[16]  G. Eggeler,et al.  On the effect of aging on martensitic transformations in Ni-rich NiTi shape memory alloys , 2005 .

[17]  M. Barnett,et al.  Thermomechanical properties of Ni-Ti shape memory wires containing nanoscale precipitates induced by stress-assisted ageing. , 2014, Acta biomaterialia.

[18]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[19]  Mark J. Jackson,et al.  Titanium and Titanium Alloy Applications in Medicine , 2016 .

[20]  M. L. Griffith,et al.  Solidification in direct metal deposition by LENS processing , 2001 .

[21]  Yung C. Shin,et al.  In Situ Synthesis and Characterization of Shape Memory Alloy Nitinol by Laser Direct Deposition , 2012, Metallurgical and Materials Transactions A.

[22]  G. Eggeler,et al.  Elementary martensitic transformation processes in Ni-rich NiTi single crystals with Ni4Ti3 precipitates , 2006 .

[23]  D. Berzins,et al.  Influence of stress and phase on corrosion of a superelastic nickel-titanium orthodontic wire. , 2009, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[24]  M. Elahinia,et al.  Manufacturing and processing of NiTi implants: A review , 2012 .

[25]  Wei Min Huang,et al.  Evolution of transformation characteristics with heating/cooling rate in NiTi shape memory alloys , 2008 .

[26]  N. Sharma,et al.  Fabrication of NiTi alloy: A review , 2018 .

[27]  T. Furuhara,et al.  Substructures of lenticular martensites with different martensite start temperatures in ferrous alloys , 2009 .

[28]  H. Matsumoto Transformation behaviour with thermal cycling in NiTi alloys , 2003 .

[29]  G. Rondelli,et al.  Evaluation by electrochemical tests of the passive film stability of equiatomic Ni-Ti alloy also in presence of stress-induced martensite. , 2000, Journal of biomedical materials research.

[30]  M. Bram,et al.  Influence of heat treatments on the mechanical properties of high-quality Ni-rich NiTi produced by powder metallurgical methods , 2008 .

[31]  Christ P. Paul,et al.  Investigations on the influence of composition in the development of Ni-Ti shape memory alloy using laser based additive manufacturing , 2015 .

[32]  J. Sakai,et al.  Fracture of nickel-titanium superelastic alloy in sodium hypochlorite solution , 2004 .

[33]  Yung C. Shin,et al.  Phase transformation characteristics and mechanical characterization of nitinol synthesized by laser direct deposition , 2013 .

[34]  Xiaobing Ren,et al.  Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti–Ni shape memory alloys , 2004 .

[35]  Horst Meier,et al.  Structural and functional properties of NiTi shape memory alloys produced by Selective Laser Melting , 2011 .

[36]  Riadh Al-Mahaidi,et al.  The effects of heat treatment on the recovery stresses of shape memory alloys , 2010 .

[37]  L. Rong,et al.  An investigation of the synthesis of Ti-50 At. pct Ni alloys through combustion synthesis and conventional powder sintering , 2000 .

[38]  J. Van Humbeeck,et al.  Microstructure of NiTi shape memory alloy due to tension–compression cyclic deformation , 1998 .

[39]  A. Bandyopadhyay,et al.  Rotating bending fatigue response of laser processed porous NiTi alloy , 2011 .

[40]  Amirhesam Amerinatanzi,et al.  Fabrication of NiTi through additive manufacturing: A review , 2016 .

[41]  Amirhesam Amerinatanzi,et al.  Recent Advances in Laser-Based Additive Manufacturing , 2017 .

[42]  M. Aboutalebi,et al.  Effects of thermomechanical treatments on the martensitic transformation and critical stress of Ti–50.2 at.% Ni alloy , 2015 .

[43]  T. Nam,et al.  Partial thermal cycling of NiTi , 2008 .

[44]  Yunzhi Wang,et al.  Effect of Ni4Ti3 precipitation on martensitic transformation in Ti-Ni , 2010 .

[45]  J. Sakai,et al.  Fracture and corrosion behaviors of Ni–Ti superelastic alloy under sustained tensile loading in neutral fluoride solution containing hydrogen peroxide , 2012 .

[46]  M. Epple,et al.  The release of nickel from orthodontic NiTi wires is increased by dynamic mechanical loading but not constrained by surface nitridation. , 2007, Journal of biomedical materials research. Part A.

[47]  Amit Kumar Singh,et al.  Microstructure and corrosion behavior of laser processed NiTi alloy. , 2015, Materials science & engineering. C, Materials for biological applications.

[48]  D. Lagoudas,et al.  Processing of TiNi from elemental powders by hot isostatic pressing , 2000 .

[49]  T. DebRoy,et al.  Measurements and Monte Carlo simulation of grain growth in the heat-affected zone of Ti–6Al–4V welds , 2004 .

[50]  David Dean,et al.  Fixation Release and the Bone Bandaid: A New Bone Fixation Device Paradigm , 2017, Bioengineering.

[51]  S. Shimizu,et al.  Recovery and recrystallization processes in TiPdNi high-temperature shape memory alloys , 1997 .

[52]  D. Dean,et al.  Finite Element Simulation and Additive Manufacturing of Stiffness-Matched NiTi Fixation Hardware for Mandibular Reconstruction Surgery , 2016, Bioengineering.

[53]  Neil Morgan,et al.  Medical shape memory alloy applications—the market and its products , 2004 .

[54]  G. Eggeler,et al.  Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling , 2010 .

[55]  Shigekazu Morito,et al.  Dislocation density within lath martensite in Fe-C and Fe-Ni alloys , 2003 .

[56]  B. Vamsi Krishna,et al.  Laser Processing of Net-Shape NiTi Shape Memory Alloy , 2007 .

[57]  H. Sehitoglu,et al.  Critical Stresses for Twinning, Slip, and Transformation in Ti-Based Shape Memory Alloys , 2016, Shape Memory and Superelasticity.

[58]  Yong Liu,et al.  3D printing of smart materials: A review on recent progresses in 4D printing , 2015 .

[59]  D. Stöver,et al.  Powder metallurgical processing of NiTi shape memory alloys with elevated transformation temperatures , 2008 .

[60]  Chuang Dong,et al.  Improved in vitro corrosion resistance of a NiTi alloy by high current pulsed electron beam treatment , 2006 .

[61]  B. Bertheville,et al.  Alternative powder metallurgical processing of Ti-rich NiTi shape-memory alloys , 2005 .