Degradation of automotive materials in palm biodiesel

As compared to petroleum diesel, biodiesel is more corrosive for automotive materials. Studies on the characterization of corrosion products of fuel exposed automotive materials are scarce. Automotive fuel system and engine components are made from different ferrous and non-ferrous materials. The present study aims to investigate the corrosion products of different types of automotive materials such as copper, brass, aluminum and cast iron upon exposure to diesel and palm biodiesel. Changes in fuel properties due to exposure of different materials were also examined. Degradation of metal surface was characterized by digital camera, SEM/EDS and X-ray diffraction (XRD). Fuel properties were examined by measuring TAN (total acid number), density and viscosity. Among the metal investigated, copper is found to be least resistant in biodiesel and formed comparatively more corrosion products than other metals. Upon exposure of metals in biodiesel, TAN number crosses the limit given by standard while density and viscosity remain within the acceptable range of limit.

[1]  M. A. Fazal,et al.  Corrosion characteristics of copper and leaded bronze in palm biodiesel , 2010 .

[2]  Saroj Kumar Jha,et al.  Effect of incompletely converted soybean oil on biodiesel quality , 2007 .

[3]  M. Scendo.  Corrosion inhibition of copper by potassium ethyl xanthate in acidic chloride solutions , 2005 .

[4]  H. Masjuki,et al.  Corrosion of magnesium and aluminum in palm biodiesel: A comparative evaluation , 2013 .

[5]  Thomas T. Adams,et al.  Storage stability of poultry fat and diesel fuel mixtures: Specific gravity and viscosity , 2008 .

[6]  M. A. Fazal,et al.  Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials , 2010 .

[7]  M. A. Fazal,et al.  Effect of temperature on tribological properties of palm biodiesel , 2010 .

[8]  R. Armstrong,et al.  The corrosion of metals in contact with ester oils containing water at 60 and 150°C , 1995 .

[9]  Zhen Fang,et al.  Production of biodiesel from Jatropha oil catalyzed by nanosized solid basic catalyst , 2011 .

[10]  Amit Sarin,et al.  Influence of metal contaminants on oxidation stability of Jatropha biodiesel , 2009 .

[11]  M. A. Fazal,et al.  Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel , 2011 .

[12]  M. A. Fazal,et al.  Compatibility of automotive materials in biodiesel: A review , 2011 .

[13]  Mauro Sgroi,et al.  BIOFEAT: Biodiesel fuel processor for a vehicle fuel cell auxiliary power unit ☆: Study of the feed system , 2005 .

[14]  Havva Balat,et al.  Progress in biodiesel processing , 2010 .

[15]  M. A. Fazal,et al.  Biodiesel feasibility study: An evaluation of material compatibility; performance; emission and engine durability , 2011 .

[16]  A. K. Gupta,et al.  Corrosion behavior of biodiesel from seed oils of Indian origin on diesel engine parts , 2007 .

[17]  I. Barabas,et al.  Key Fuel Properties of Biodiesel-diesel Fuel-ethanol Blends , 2009 .

[18]  Georgios Fontaras,et al.  Effect of biodiesel origin on regulated and particle-bound PAH (polycyclic aromatic hydrocarbon) emi , 2011 .

[19]  Wimonrat Trakarnpruk,et al.  Palm oil biodiesel synthesized with potassium loaded calcined hydrotalcite and effect of biodiesel blend on elastomer properties , 2008 .

[20]  Patricio Aníbal Sorichetti,et al.  Electric properties of biodiesel in the range from 20 Hz to 20 MHz. Comparison with diesel fossil fuel , 2008 .

[21]  H. Masjuki,et al.  Degradation of physical properties of different elastomers upon exposure to palm biodiesel , 2011 .

[22]  A. Atrei,et al.  Characterisation by XPS of the corrosion patina formed on bronze surfaces , 2002 .