Nonlinear dynamic responses of rotating pretwisted cylindrical shells

A rotating pretwisted cylindrical shell model with a presetting angle is established to investigate nonlinear dynamic responses of the aero-engine compressor blade. The centrifugal force and the Coriolis force are considered in the model. The aerodynamic pressure is obtained by the first-order piston theory. The strain–displacement relationship is derived by the Green strain tensor. Based on the first-order shear deformation theory and the isotropic constitutive law, nonlinear partial differential governing equations are derived by using the Hamilton principle. Discarding the Coriolis force effect, Galerkin approach is utilized to reduce nonlinear partial differential governing equations into a two-degree-of-freedom nonlinear system. According to nonlinear ordinary differential equations, numerical simulations are performed to explore nonlinear transient dynamic responses of the system under the effect of the single point excitation and nonlinear steady-state dynamic responses of the system under the effect of the uniform distribution excitation. The effects of the excitation parameter, damping coefficient, rotating speed, presetting angle and pretwist angle on nonlinear dynamic responses of the system are fully discussed.

[1]  Víctor H. Cortínez,et al.  Free vibration and dynamic stability of rotating thin-walled composite beams , 2011 .

[2]  William Carnegie,et al.  Vibrations of Rotating Cantilever Blading: Theoretical Approaches to the Frequency Problem Based on Energy Methods , 1959 .

[3]  W. Zhang,et al.  Analysis on nonlinear oscillations and resonant responses of a compressor blade , 2014 .

[4]  X. X. Hu,et al.  FREE VIBRATION ANALYSIS OF ROTATING TWISTED CYLINDRICAL THIN PANELS , 1999 .

[5]  X. X. Hu,et al.  Vibration analysis of laminated cylindrical thin panels with twist and curvature , 2001 .

[6]  Mohammad Hosseini,et al.  Vibration analysis of functionally graded thin-walled rotating blades under high temperature supersonic flow using the differential quadrature method , 2007 .

[7]  Liqun Chen,et al.  Free Vibration of a Rotating Ring on an Elastic Foundation , 2017 .

[8]  Zafer Kazancı,et al.  An analytical model for predicting the deflection of laminated basalt composite plates under dynamic loads , 2014 .

[9]  Sunil K. Sinha,et al.  Natural frequencies of a pre-twisted blade in a centrifugal force field , 2011 .

[10]  Mohamad S. Qatu,et al.  Vibration studies for laminated composite twisted cantilever plates , 1991 .

[11]  T. K. Varadan,et al.  LARGE AMPLITUDE VIBRATIONS OF CIRCULAR CYLINDRICAL SHELLS , 1996 .

[12]  Hong Hee Yoo,et al.  Vibration Analysis of Rotating Pre-Twisted Blades with a Concentrated Mass , 2001 .

[13]  Jia Sun,et al.  General shell model for a rotating pretwisted blade , 2013 .

[14]  L. Librescu,et al.  Structural Modeling and Free Vibration Analysis of Rotating Composite Thin-Walled Beams , 1997 .

[15]  H. Yoo,et al.  Free Vibration Analysis of Rotating Cantilever Plates , 2002 .

[16]  N. K. Chandiramani,et al.  On the free-vibration of rotating composite beams using a higher-order shear formulation , 2002 .

[17]  S. K. Kim,et al.  MODAL ANALYSIS OF ROTATING COMPOSITE CANTILEVER PLATES , 2002 .

[18]  Yukinori Kobayashi,et al.  Large amplitude free vibration of thick shallow shells supported by shear diaphragms , 1995 .

[19]  J. S. Rao,et al.  Coupled bending-bending vibrations of pre-twisted cantilever blading allowing for shear deflection and rotary inertia by the Reissner method , 1981 .

[20]  C. Lim,et al.  Free vibration of elastic helicoidal shells , 2005 .

[21]  Marco Amabili,et al.  Damping for large-amplitude vibrations of plates and curved panels, Part 1: Modeling and experiments , 2016 .

[22]  I. L. Arteaga,et al.  A dynamic rotating blade model at an arbitrary stagger angle based on classical plate theory and the Hamilton's principle , 2013 .

[23]  Hai Wang,et al.  Nonlinear vibration of shear deformable FGM cylindrical panels resting on elastic foundations in thermal environments , 2014 .

[24]  J. S. Rao,et al.  Coupled bending-torsion vibrations of rotating blades of asymmetric aerofoil cross section with allowance for shear deflection and rotary inertia by use of the Reissner method , 1981 .

[25]  M. Yao,et al.  Nonlinear vibrations of blade with varying rotating speed , 2012 .

[26]  Liviu Librescu,et al.  Effects of pretwist and presetting on coupled bending vibrations of rotating thin-walled composite beams , 2003 .

[27]  D Young,et al.  Vibration of rectangular plates by the Ritz method , 1950 .

[28]  C. C. Chao,et al.  COMPARISON OF NATURAL FREQUENCIES OF LAMINATES BY 3-D THEORY, PART II: CURVED PANELS , 2000 .

[29]  F. Pellicano,et al.  Nonlinear vibrations of functionally graded cylindrical shells , 2013 .

[30]  Marco Amabili,et al.  Non-linear vibrations of shells: A literature review from 2003 to 2013 , 2014 .

[31]  F. Alijani,et al.  Damping for large-amplitude vibrations of plates and curved panels, part 2: Identification and comparisons , 2016 .

[32]  Hong Hee Yoo,et al.  Vibration analysis of rotating pretwisted tapered blades made of functionally graded materials , 2016 .

[33]  F. Alijani,et al.  Nonlinear vibrations of thick laminated circular cylindrical panels , 2013 .

[34]  Li-Qun Chen,et al.  Natural frequencies of nonlinear vibration of axially moving beams , 2011 .

[35]  Marco Amabili,et al.  A comparison of shell theories for large-amplitude vibrations of circular cylindrical shells: Lagrangian approach , 2003 .

[36]  Fengxia Wang,et al.  Stability analysis of a nonlinear rotating blade with torsional vibrations , 2012 .

[37]  Marco Amabili,et al.  Nonlinear vibrations of circular cylindrical panels , 2005 .

[38]  M. Yao,et al.  Supersonic flutter analysis of FGM shallow conical panel accounting for thermal effects , 2018 .

[39]  V. Ramamurti,et al.  A parametric study of vibration of rotating pre-twisted and tapered low aspect ratio cantilever plates , 1981 .

[40]  S. Hosseini-Hashemi,et al.  Aeroelastic behavior of cantilevered rotating rectangular plates , 2011 .

[41]  Chen Lien-Wen,et al.  Vibration and stability of cracked thick rotating blades , 1988 .

[42]  Firooz Bakhtiari-Nejad,et al.  Free in-plane vibration analysis of rotating rectangular orthotropic cantilever plates , 2016 .

[43]  X. X. Hu,et al.  FREE VIBRATION ANALYSIS OF CURVED AND TWISTED CYLINDRICAL THIN PANELS , 1999 .

[44]  S. H. Hashemi,et al.  Free vibration analysis of rotating thick plates , 2009 .

[45]  Tsuneo Tsuiji,et al.  Vibration analysis of twisted thin cylindrical panels by using the Rayleigh-Ritz method. , 1990 .

[46]  V. Ramamurti,et al.  Natural frequencies of twisted rotating plates , 1984 .

[47]  J. S. Rao,et al.  Free vibrations of rotating small aspect ratio pretwisted blades , 1987 .