Microfabricated centrifugal pump driven by an integrated synchronous micromotor

This paper presents the development of a new design of the microfabricated centrifugal force pump. The pumping concept is based on running an impeller (a rotor including permanent magnets carrying straight and backward blades) within an integrated synchronous motor, which can be operated at different rotational speeds to pump water. The impeller is 5.5 mm in diameter, and is 1.5 mm in height. This micropump with 7-straight-blade impeller can operate smoothly up to a rotational speed of 9000 rpm. It can deliver a non-pulsating maximum flow rate of up to 12 ml/min and allows water to be pumped up to a 24 cm water head. Additionally, the micropump with the backward-blade-impeller pump delivered a flow rate of up to 14.3 ml/min. at a rotational speed of 11,400 rpm with no back pressure. The micropump was patterned using a series of microfabrication processes including sputtering, photolithography and electroplating within a clean room. Such a pump can be integrated into a system of a compact size and can provide a wide range of flow rates. It could also be a promising device for use within biological and micro biomedical fields. To our knowledge, this is the smallest centrifugal pump in the world with an integrated electromagnetic synchronous motor that offers such high flow rates.

[1]  Wolfgang Ehrfeld,et al.  Micro gear pumps for dosing of viscous fluids , 1997 .

[2]  Stephanus Büttgenbach,et al.  Development and testing of a synchronous micropump based on electroplated coils and microfabricated polymer magnets , 2012 .

[3]  Peter Vettiger,et al.  High-aspect-ratio, ultrathick, negative-tone near-UV photoresist and its applications for MEMS , 1998 .

[4]  Yu Zhou,et al.  An Electromagnetically-Actuated All-PDMS Valveless Micropump for Drug Delivery , 2011, Micromachines.

[5]  P. Yager,et al.  A ferrofluidic magnetic micropump , 2001 .

[6]  Stephanus Büttgenbach,et al.  Simulation and optimization of the magnetic field in an electroplated copper micro-coil , 2013, Microtechnologies for the New Millennium.

[7]  Yong-Kweon Kim,et al.  Fabrication and experiment of a planar micro ion drag pump , 1998 .

[8]  M. Gijs,et al.  A PMMA valveless micropump using electromagnetic actuation , 2005 .

[9]  R. Pease,et al.  High-performance heat sinking for VLSI , 1981, IEEE Electron Device Letters.

[10]  Hsueh-Chia Chang,et al.  An electro-osmotic micro-pump based on monolithic silica for micro-flow analyses and electro-sprays , 2005, Analytical and bioanalytical chemistry.

[11]  A. Lee,et al.  An AC magnetohydrodynamic micropump , 2000 .

[12]  D. Xing,et al.  Micropumps, microvalves, and micromixers within PCR microfluidic chips: Advances and trends. , 2007, Biotechnology advances.

[13]  Stephanus Büttgenbach,et al.  Fabrication of internally driven micro centrifugal force pumps based on synchronous micro motors , 2010, DTIP 2010.

[14]  Peter Woias,et al.  Micropumps—past, progress and future prospects , 2005 .

[15]  S. Büttgenbach,et al.  Investigation of the influence of design parameters on the flow performance of single and double disk viscous micropumps , 2007 .

[16]  G. Reyne,et al.  Magnetic micro-actuators and systems (MAGMAS) , 2003 .

[17]  Il-Joo Cho,et al.  A surface-tension driven micropump for low-voltage and low-power operations , 2002 .

[18]  R. Fair,et al.  An integrated digital microfluidic lab-on-a-chip for clinical diagnostics on human physiological fluids. , 2004, Lab on a chip.

[19]  S. Büttgenbach,et al.  Design, Fabrication, and Characterization of a Continuous Flow Micropump System , 2016 .

[20]  Juan G. Santiago,et al.  A review of micropumps , 2004 .

[21]  Dong Liu,et al.  On-Chip Thermal Management With Microchannel Heat Sinks and Integrated Micropumps , 2006, Proceedings of the IEEE.

[22]  Ilene J. Busch‐Vishniac.  The case for magnetically driven microactuators , 1992 .

[23]  Stephanus Büttgenbach,et al.  Implementation of Synchronous Micromotor in Developing Integrated Microfluidic Systems , 2014, Micromachines.

[24]  Stephanus Büttgenbach,et al.  A multifunction and bidirectional valve-less rectification micropump based on bifurcation geometry , 2010 .

[25]  Stephanus Büttgenbach,et al.  Micro gear pump with internal electromagnetic drive , 2010 .

[26]  Arvind Raman,et al.  Microscale pumping technologies for microchannel cooling systems , 2004 .

[27]  Claus Duschl,et al.  Controlling electrohydrodynamic pumping in microchannels through defined temperature fields , 2006 .

[28]  Bruce K. Gale,et al.  Single-disk and double-disk viscous micropumps , 2005 .

[29]  Yan Chiew Wong,et al.  A stack bonded thermo-pneumatic micro-pump utilizing polyimide based actuator membrane for biomedical applications , 2017 .