Electrochemical impedance spectroscopy in the presence of non-linear distortions and non-stationary behaviour Part I: theory and validation

[1]  Z. Szklarska‐Śmiałowska,et al.  Pitting Corrosion of Metals , 1986 .

[2]  Johan Schoukens,et al.  Survey of excitation signals for FFT based signal analyzers , 1988 .

[3]  F. Mansfeld,et al.  Surface modification of Al alloys and Al-based metal matrix composites by chemical passivation , 1989 .

[4]  F. Mansfeld,et al.  Pitting and Passivation of Al Alloys and Al‐Based Metal Matrix Composites , 1990 .

[5]  K. Jüttner.  Electrochemical impedance spectroscopy (EIS) of corrosion processes on inhomogeneous surfaces , 1990 .

[6]  C. Mayer,et al.  AC-Impedance measurements on aluminium in chloride containing solutions and below the pitting potential , 1990 .

[7]  Florian Mansfeld,et al.  Electrochemical impedance spectroscopy (EIS) as a new tool for investigating methods of corrosion protection , 1990 .

[8]  C. Brett.  The application of electrochemical impedance techniques to aluminium corrosion in acidic chloride solution , 1990 .

[9]  J. Chavarín,et al.  Electrochemical Investigations of the Activation Mechanism of Aluminum , 1991 .

[10]  Mark E. Orazem,et al.  Measurement Models for Electrochemical Impedance Spectroscopy I . Demonstration of Applicability , 1992 .

[11]  F. Mansfeld,et al.  Impedance spectra for aluminum 7075 during the early stages of immersion in sodium chloride , 1993 .

[12]  R. N. Schindler,et al.  Validation of experimental data in electrochemical impedance spectroscopy , 1993 .

[13]  R. N. Schindler,et al.  A new approach to the problem of good and bad impedance data in electrochemical impedance spectroscopy , 1994 .

[14]  Fred J. Taylor.  Principles of Signals and Systems , 1994 .

[15]  Mark E. Orazem,et al.  Application of Measurement Models to Impedance Spectroscopy III . Evaluation of Consistency with the Kramers‐Kronig Relations , 1995 .

[16]  P. Marcus,et al.  Corrosion Mechanisms in Theory and Practice , 1995 .

[17]  L. García-Rubio,et al.  Application of Measurement Models to Impedance Spectroscopy II . Determination of the Stochastic Contribution to the Error Structure , 1995 .

[18]  R. N. Schindler,et al.  Effect of sample nonlinearity on the performance of time domain electrochemical impedance spectroscopy , 1995 .

[19]  F. Bellucci,et al.  Degradation behaviour of 6013-T6, 2024-T3 alloys and pure aluminium in different aqueous media , 1997 .

[20]  Z. Szklarska‐Śmiałowska.  Pitting corrosion of aluminum , 1999 .

[21]  S. Pyun,et al.  Effects of Sulfate and Nitrate Ion Additives on Pit Growth of Pure Aluminum in 0.1 M Sodium Chloride Solution , 2000 .

[22]  S. Pyun,et al.  Effects of sulphate ion additives on the pitting corrosion of pure aluminium in 0.01 M NaCl solution , 2000 .

[23]  Yves Rolain,et al.  Broadband versus stepped sine FRF measurements , 2000, IEEE Trans. Instrum. Meas..

[24]  Johan Schoukens,et al.  Design of multisine excitations to characterize the nonlinear distortions during FRF-measurements , 2001, IEEE Trans. Instrum. Meas..

[25]  Yves Rolain,et al.  Frequency response function measurements in the presence of nonlinear distortions , 2001, Autom..

[26]  C. Hsu,et al.  Technical Note: Concerning the Conversion of the Constant Phase Element Parameter Y0 into a Capacitance , 2001 .

[27]  J. Vereecken,et al.  Influence of different anions on the behaviour of aluminium in aqueous solutions , 2002 .

[28]  Rik Pintelon,et al.  Linear modeling in the presence of nonlinear distortions , 2002, IEEE Trans. Instrum. Meas..