This paper investigates the mechanical characterisation of a joint, suitable for different configurations within a heavy timber frame, consisting of a wooden element connected to a steel stub by means of an end-plate and glued-in steel rods. This connection system has some interesting properties in terms of mechanical performance, versatility and prefabrication. An analytical model to predict the joint response in terms of its key parameters (e.g. failure mode, ultimate resistance, stiffness and rotation capacity) is proposed and validated through an extensive experimental programme. The component method, originally proposed for semi-rigid joints in steel frameworks, is adapted in order to set up a feasible general model for steel–timber joints, enabling application of the capacity design approach and offering the required ductility for applications in seismic zones. The tests carried out indicate satisfactory agreement between theoretical and experimental results: the reliable prediction of joint failure...
[1]
K. W. Johansen,et al.
Theory of Timber Connections
,
1949
.
[2]
Jean-Pierre Jaspart.
General report: session on connections
,
2000
.
[3]
M. Piazza,et al.
Axial glued-in steel timber joints—experimental and numerical analysis
,
2004,
Holz als Roh- und Werkstoff.
[4]
Roberto Tomasi,et al.
Ductile Design of Glued-Laminated Timber Beams
,
2009
.
[5]
Ioannis Vayas,et al.
On the rotation capacity of moment connections
,
2004
.
[6]
Roberto Tomasi,et al.
Ductile End Connections for Glulam Beams
,
2008
.