Counter-rotating type pump-turbine unit cooperating with wind power unit
暂无分享,去创建一个
This serial research proposes the hybrid power system combined the wind power unit with the counter-rotating type pump-turbine unit, to provide the constant output for the grid system, even at the suddenly fluctuating/turbulent wind. In this paper, the tandem impellers of the counter-rotating type pumping unit was operated at the turbine mode, and the performances and the flow conditions were investigated numerically and experimentally. The 3-D turbulent flows in the runners were simulated at the steady state condition by using the commercial CFD code of ANSYS-CFX ver.12 with the SST turbulence model. While providing the pump unit for the turbine mode, the maximum hydraulic efficiency is close to one of the counter-rotating type hydroelectric unit designed exclusively for the turbine mode. Besides, the runner/impeller of the unit works evidently so as to coincide the angular momentum change through the front runners/impellers with that through the rear runners/impellers, namely to take the axial flow at not only the inlet but also the outlet without the guide vanes. These results show that this type of unit is effective to work at not only the pumping but also the turbine modes.
[1] Toshiaki Kanemoto,et al. Development of Counter-Rotational Type Machine for Hydroelectric Power Generation (3rd Report, Design Materials for Solidity of Axial Flow Runners) , 2006 .
[2] 敏明 金元,et al. 相反転方式による軸流ポンプ性能のスマートコントロール : (第1報, モータの反トルクを利用する相反転方式の提案と性能の確認) , 2000 .
[3] Toshiaki Kanemoto,et al. Numerical Simulation in Turbine Mode of Counter-Rotating Type Axial Flow Pump (Preparation of Pump-Turbine Unit in Cooperation With Wind Power Unit) , 2012 .